ARRI continues to expand its LED spotlights with the introduction of the black L5-C Plus RGB LED Fresnel Light. Featuring a pole-operated yoke, the L5-C Plus has a flood-to-spot capability with a beam angle adjustment of 12-46°. The Plus version adopts the uniform, homogeneous light field of its predecessor, while providing up to a 90% increase in output. Similar in size and weight to its previous version, the upgraded L-Series Plus has a new RGBW light engine and firmware technology, operating on the same software as the brand's SkyPanel. Other improvements include direct network connectivity for LAN input and control via Art-Net and sACN protocols. Users will also appreciate simplified onboard control thanks to a familiar and intuitive interface.

For Film, Broadcast & Video Production    Output: 48,900 Lux at 3.3' (12°)    2800-10,000K CCT; RGB    Beam Angle: 12-46°    AC Power    CRI 92 | TLCI 83    Onboard, DMX, Art-Net & sACN Control    IP20 Rated    Includes Combo Pin    5' powerCON to Bare Ends Mains Cable

Designed as the brightest ARRI full-color Fresnel fixture, the L5-C Plus has a 5" light aperture that offers an increased output up to 90% depending on your settings, such as beam angle and CCT. This fixture has a peak intensity of 48,900 lux at 3.3' (spot beam at 5600K).

The 100-0% dimmable L5-C Plus is a "fully tunable" white light source, allowing you to match existing fixtures with color temperatures from 2800 to 10,000K. The onboard controller allows full minus green to plus green adjustment as well as RGB+W color gamut color mixing with hue and saturation control, enabling matching of specific shades and skin tones. A wide selection of gels are available as well. CRI of 92 and TLCI of 83 ensure color accuracy.

All functions can be controlled via DMX, an ideal feature for broadcast studios, while RDM permits monitoring of the light's status. Control and configuration are extended via Art-Net, sACN, and web page control of light and settings via HTTP.

Power options include the L5-C Plus's 100-240 VAC onboard power supply. A required power cable does not come with this light and needs to be purchased separately.

A key element of the versatility of traditional Fresnels is the ability to spot and flood the beam as needed. Whether it's a flood field for a pullback shot or a tight spot for a bright highlight, the continuous focus-ability of the L-Series Plus lives up to your expectations. And, unlike traditional Fresnels, which have significant light waste in spot focus, the efficient L-Series Plus optical system maintains the same field lumens in all focus positions.

Clear, defined shadows have traditionally been solely a trait of single source tungsten and daylight fixtures. ARRI L-Series Plus Fresnels provide the same single shadow properties lighting designers expect, delivering natural results.

The ARRI sliding stirrup design enables precise adjustment of the fixture's center of gravity, to compensate for front-end accessories. It also gives the option of pulling the fixture back and reducing its hanging height.

Two focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reaching around the fixture.

The strong tilt-lock provides extremely secure locking, eliminating movement and slippage and ensuring that the fixtures will stay where you put them.

The L5-C Plus allows for firmware updates through the USB port, making sure the light will always perform at its best.

The light is compatible with optional accessories, including the ones that were made for previous L-Series lights. Additionally, the separately available SkyPanel remote can also control the L-Series Plus through a USB connection.

• Long-term performance for 50,000+ hours
• Daisy-chain power and data
• IP20 rated
• CE, UKCA, CB, ENEC, cNRTLus, FCC, PSE certifications

Related Questions and Answers

Q: 1. does this set comes with 650w bulbs and the necessary cables to get it working out of the box?

A: This kit would include 2 650w bulbs and 1 300 watt bulb. The necessary cable to plug them into an AC outlet are pre-installed on each fixture.

Q: 2. Is this compatible with Arri ArriLite 750 Plus?

A: Unfortunately, this lamp is not compatible with the Arrilite 750 +.

Q: 3. Why are these 5000K? For true daylight these should be in the 5500/5600 kelvin range. Am I missing something?

A: These are geared for the Cinema industry and 5000K is the preferred color temperature

Q: 4. Why are these 5000K? For true daylight these should be in the 5500/5600 kelvin range. Am I missing something?

A: You are right , a day light balance is average 5600k this makes it slightly a little warmer

Q: 5. Could I make this fit in an arri 150?

A: No, the following Relamp will accommodate the following fixtures. ARRI 300 Plus ARRI ARRILITE 575 Plus/Fresnel Mini Kit ARRI Compact Fresnel Three-Light Kit ARRI Four-Light Fresnel Mini Kit ARRI Fresnel 5-Light Kit ARRI Fresnel Combo 4-Light Kit ARRI H-4 Plus Hybrid AC Light Kit ARRI Softbank D1 Three-Light Kit ARRI Softbank D2 Three-Light Kit ARRI Softbank D4 Four-Light Kit ARRI Softbank I Tungsten 4-Light Kit ARRI Softbank IV Plus 5 Light Kit

Q: 6. Why is this daylight bulb rated at 5000k? For this price you would think they would actually produce a 5500/5600 kelvin product.

A: Hi Sam, Visionsmith ReLamp went with the 5000k standard because their test showed that it produce more pleasing skin tones (as it is a little warmer) than 5500/5600K.

Q: 7. Does it fit into the fresnels of ARRI Softbank II Plus 4 Light Kit (220-240 VAC)?

A: Yes. The following led is designed and made for the ARRI 650 Plus Fresnel unit.

Q: 8. what plug end are the lights?

A: USA ground plug (3-prong)

Q: 9. Would this fit as a replacement for the tightening knob on the Elinchrom ONE? The flash droops due to insufficient tightening.

A: No, this Arri Locking Yoke Tilt Handle is specific to the Arri L5-C Fresnel.

Q: 10. Are these bulbs tough? Would they last if I set up the lights and tear down every day for different jobs?

A: Yes, these bulbs are tough, so they can last for quite a white between set-ups and tear downs.