500 Ft Ethernet Cable Indoor Outdoor

Camplex Tac1 Simplex Om1 Multimode Lc Fiber Optic Tactical Cable - 500' (152.4 M)

Product Code: ga14797
Availability: In Stock

$1,324.47 $1,999.95

Qty

5 reviews Write a review

Description
Reviews (5)

The 500' (152.4 m) TAC1 Simplex OM1 Multimode LC Fiber Optic Tactical Cable from Camplex meets all outdoor tactical needs for broadcast applications requiring an outdoor rated crush and impact resistant design. The polyurethane core-locked design will be found where ordinary PVC jacket cables do not provide adequate protection in the field. The cable is machine polished and interferometer tested to industry standards.

Designed to Withstand Impact Indoor/Outdoor Rated Jacket Polyurethane Core-Locked Design Rugged & Lightweight Broadcast Deployable

Parameters
Connector 1	LC
Connector 2	LC
Cable Length	500' / 152.4 m
Core Size	62.5 µm
Return Loss	RL: < 55 dB IL: < 0.25 dB
Attenuation	1.5 dB/km @ 1310 nm 3.5 dB/km @ 850 nm
Operating Conditions	-67 to 185°F / -55 to 85°C

Broadcast deployable

Indoor/Outdoor rated jacket

500 Micron primary acrylate buffer with 900 Micron secondary hard elastomeric buffer (Ultra-Fox Plus)

Excellent crush and impact resistance due to their polyurethane core-locked outer jacket

Designed to withstand crush and impact after deployment

Strong, lightweight and durable

Related Questions and Answers

Q: 1. How well will this work for trimming prints with the straight cutter? Would be nice to use one machine for everything rather than also needing a separate rotary trimmer.

A: The mat cutters are not recommended for paper trimming but if you want to save on cost/space, you could buy a paper trimmer and pre-cut mats.

Q: 2. How good is it with 4-ply cutting? I presume the video showing the ease of use is with a 2 ply.

A: 4-ply cutting works well with this cutter.

Q: 3. Is this cable plenum rated?

A: The Sescom SES-DMX1BK-FT DMX lighting control cable is not plenum rated. However, it meets or exceeds USITT standards featuring low-capacitance data pairs for long distance applications.

Q: 4. Is this for soft armor?

A: This vest is for for user-supplied body armor plates on the front and back of the vest.

Q: 5. Do you sell the blade/cutter parts?

A: We do sell blade/cutter parts for the Logan Graphics 550-1 Simplex Classic Cutter (40"). See below: https://bhpho.to/3BkRdz5

Q: 6. Can it cut museum board mats or 8 ply mats?

A: As per the user manual, this cutter is only suitable for 4 Ply boards.

Q: 7. Is this made to slip over an existing windscreen or does it slide onto the mic itself?

A: The Cavision Windcover features a foam interior and does not require an existing foam windshield to mount.

Q: 8. How do you terminate these connectors? DO you have a detail showing this?

A: This is the manufacture's product information on the installation:a href= http://datasheet.octopart.com/NO2-4FDW-A-Neutrik-datasheet-23702221.pdf target= _blank http://datasheet.octopart.com/NO2-4FDW-A-Neutrik-datasheet-23702221.pdf/a

Q: 9. How much height, width and depth do you have when collapsed? As far as the unset size difference collapsed with the Krane Amg 500 model?

A: As per the manufacturer, the storage dimensions for this cart are 32.6” H x 18.9” W x 8.8 D, with a 19.5” depth on the caster side.

Q: 10. This question is mainly for ProDirector_DP who reviewed the Krane AMG 750 about 3 years ago. Are you still loving the cart? How has it held up over the years?

A: Yes, the best cart I have used I do a lot of shows and stores real nice in my van.

Mike	14/09/2024
I simply wanted to start framing my own pictures, certificates, etc., and after reading numerous reviews felt that this was the perfect cutter. I wanted the full size capability, and though I considered the Elite model, it actually ended up being cheaper to buy this model and purchase the additional accessories separately that normally come with the Elite. Strange but true. As per the instructions on the Logan Graphics website, I checked to see that the cutter was square - and everything was perfect right out of the box. I read some reviews that complained about poorly applied stickers for measurements, and difficulty repeating even basic cuts. Nothing could be further from the truth for me - everything seemed well made, and well put together. the measurements were dead accurate, and my first double mat project had the cut-outs dropping away perfectly after the final cut. And major kudos to B&H as well - I ordered this from Toronto, Ontario using the pre-payment option for duties for international delivery. My order was shipped the same day I submitted it, it arrived in 3 days at my door, the pre-paid duty fee was extremely reasonable, and even factoring in US/CAN exchange and duty (free shipping to CAN!), the total cost was hundreds less than the best Canadian option. 5

Last graphics action hero!	14/08/2024
This paper trimmer/cutter came with all the accessories for paper, matte cutting (straight and beveled), and heavy matt cutting. It also included a glass cutter! Not only that it also included a nice book on matte cutting and framing!It is easy to assemble and super easy to use!Works great on heavy paper like opaque Scrim! 5