4 Channel Digital Video Recorder Pci Card

Ashly Ne4800asc Network Enabled Digital Signal Processor With 4-channel Aes3 Inputs + 8-channel Aes3 Outputs + Cobranet Card

Product Code: ga147974
Availability: In Stock

$10,047.00 $15,974.73

Qty

0 reviews Write a review

Description
Reviews (0)

Control and protect your sound system with the Ashly ne4800ASC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne4800ASC features four option bays for expanded functionality. This model includes the 4-channel AES3 input card, 8-channel AES3 output card, and CobraNet card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

4 Analog Inputs / 8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows Compatible

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Word clock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.3 lb / 4.7 kg

CobraNet, Dante, AES3, Mic input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover, and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network setup time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. USB interface for the Mike?

A: The Pyle Pro PMXU43BT can be used as a USB interface for analog microphones. This means that if you want to record or send audio directly into a computer, this mixer will act as the analog to digital converter.

Q: 2. Are the Main Outs balanced (TRS) or unbalanced?

A: The MAIN outputs are TRS balanced.

Q: 3. Can I connect this directly to my computer without any intermediary devices?

A: This mixer supports audio interface functionality via the USB connection to a computer, so no other device would be required. A USB cable is included.

Q: 4. Can the USB interface record .mo3 files in addition to playing them?

A: plays them only

Q: 5. Is it possible to have 5 inputs in MW. One must be in the middle of other 4 inputs in corners?

A: Yes you can have 5 inputs in the multi-view.

Q: 6. is it possible to have 5 inputs in the MW. one must be centered in the middle of MW?

A: Yes

Q: 7. My blue tooth indicates a connection but there is no audio. I had audio for about one minute then it dropped off. Any suggestions as to how to get the audio back?

A: Try turning off the mixer for 12 seconds, then turning it back on and attempt the Bluetooth pairing again. Bluetooth signal in general can be interfered with if there are other Bluetooth devices being used in close proximity. If possible, make sure those other devices are off when using Bluetooth on the mixer. If the connection is made and there's still no audio, please make sure the main level is turned up on the mixer so audio will pass to your speakers. If the problem persists, please give Pyle Pro a call at 800-444-5671.

Q: 8. Can you use the XLR input and 1/4 inch input of the same input at the same time and have them sum to a single output?

A: Either the XLR or 1/4" input connectors can be used for balanced or unbalanced connections to the dbx AFS2 Dual-Channel Advanced Feedback Suppression Processor. Using both inputs on a channel at the same time is not recommended because it could unbalance balanced lines, cause phase cancellation, short a conductor to ground, or cause damage to other equipment that is connected to the AFS2. Therefore, it is best to use only one input connector per channel.

Q: 9. Is this compatible with a Mac using Audacity?

A: With USB connection to the computer, this Pyle PMXU63BT mixer is compatible with mac, and will send audio into a software like Audacity, or other DAW programs.

Q: 10. Is the level of the mono CTRL OUT controlled by the master fader?

A: Yes, the Pyle Pro PMXU43BT Compact 4-Channel, Bluetooth-Enabled Audio Mixer's control room output is affected by the master fader.

There are no reviews for this product.