Network Interface Card For Pc

Ashly Ne4800sc Network Enabled Digital Signal Processor With 8-channel Aes3 Outputs + Cobranet Network Card

Product Code: ga147977
Availability: In Stock

$9,297.00 $14,596.29

Qty

0 reviews Write a review

Description
Reviews (0)

Control and protect your sound system with the Ashly ne4800SC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne4800SC features four option bays for expanded functionality. This model includes the 8-channel AES3 output card and CobraNet network card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

4 Analog Inputs / 8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows Compatible

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Word clock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.3 lb / 4.7 kg

CobraNet, Dante, AES3, Mic input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover, and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network setup time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. What is the power rating for all channels driven?

A: The Denon AVR-A1H would be around 110W with all channels driven.

Q: 2. Thinking of adding a Motiva XPA-3 Gen3 3 Channel Audiophile Home Theater Power Amplifier to this Sony. Would this work well?

A: You can go from one of the Pre-Outs from the Sony STR-AZ7000ES, via RCA stereo cable, into the stereo RCA inputs on the Emotiva - XPA-3 Gen3 Amplifier.

Q: 3. Is there a phono input with pre-amp for a turntable?

A: Sony STR-AN1000 7.2-Channel Network A/V Receiver, BH # SOSTRAN1000, has no phone input. To connect a turntable that only has a PHONO output jack, you need to connect a phono equalizer (not supplied) between the turntable and this receiver. Rolls VP29 Phono Preamp (B&H # ROVP29)

Q: 4. Does it have 110 and 220 volts ?

A: The Yamaha R-N800A 2.1-Channel Network A/V Receiver (Silver), BH # YARN800ASL, is 120VAC 60Hz only.

Q: 5. Does this system support wireless speakers ,Front and back or period support?

A: The Sony STR-AN1000 7.2-Channel Network A/V Receiver (B&H # SOSTRAN1000) is compatible with select Sony wireless rear speakers and subwoofers, but it is advisable to use a wired connection whenever possible, especially if this receiver is part of a home theater system being used for watching TV/movies.

Q: 6. Is this unit 240VAC rated?

A: The Denon AVR-X4800H is only compatible for use in North America.

Q: 7. I live in Germany and want to know if the Sony ES STR-AZ7000ES is dual-voltage and will work here?

A: No, the Sony STR-AZ7000ES 13.2-Channel Network A/V Receiver (B&H # SOTRAZ7000ES) only accepts 120 V AC power at 60 Hz.

Q: 8. I'm enjoying this receiver as 7.1 in Living Room. Can I add 2 bluetooth speakers in bedroom 25' feet away, concrete walls?

A: It is unlikely that you will be able to use two Bluetooth speakers with the Sony STR-AN1000 7.2-Channel Network A/V Receiver at 25' away through concrete walls. Concrete blocks Bluetooth connections more effectively than other materials, so you would be best off placing your speakers within a direct line of sight of this receiver.

Q: 9. I want to buy this beauty my speakers are 8 ohms can I connect a pair of 4 ohms alone with my 8 ohms and have no issues.jbl l100

A: The Onkyo TX-NR6100 is rated to handle 4-16 Ohm speakers.

Q: 10. Can you use dual subwoofers and are they parallel or independent outputs

A: The Onkyo TX-RZ50 has 2 separate subwoofer outputs.

There are no reviews for this product.