Doro Easy Universal Remote Control

Ashly Ne8800ac Network Enabled Digital Signal Processor With 8-channel Aes3 Inputs + Cobranet Card

Product Code: ga147980
Availability: In Stock

$10,497.00 $13,121.25

Qty

0 reviews Write a review

Description
Reviews (0)

Control and protect your sound system with the Ashly ne8800AC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne8800AC features four option bays for expanded functionality. This model includes the 8-channel AES3 input card and CobraNet card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

8 Analog Inputs/8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Wordclock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.5 lb / 4.8 kg

CobraNet, Dante, AES3, Mic Input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. I have a pair of JBL Loft 40 speakers, can I use them directly on this machine? Can you also show the picture of the back as well?

A: Yes, you should be able to plug the speakers directly into the back of this unit. Unfortunately, I do not have a picture of the back.

Q: 2. Are the Main Outs balanced (TRS) or unbalanced?

A: The MAIN outputs are TRS balanced.

Q: 3. How do the preamps sound? Better or worse than Behringer's Xenyx preamps?

A: Behringer has the edge regarding the mic pre's.

Q: 4. Can you confirm if it can run on 220V ?

A: The system has a switch on the rear panel for 110 or 220V AC operation.

Q: 5. Can I connect this mixer's power supply to a European socket?

A: The Pyle Pro PMXU63BT Audio Mixer includes a power supply with a standard plug for use in North America, but you can use it with a step-down transformer like the Watson VCG-SD50 50 Watt Step-Down International Voltage Transformer (B&H # WAVCSD50) to enable compatibility in Europe.

Q: 6. Is this compatible with a Mac using Audacity?

A: With USB connection to the computer, this Pyle PMXU63BT mixer is compatible with mac, and will send audio into a software like Audacity, or other DAW programs.

Q: 7. .....I just read the description: it says Bass, Treble and Balance Controls YET as I look at the face of this unit, NO bass, NO treble and NO balance controls? What gives? Mistake or are the controls in the back or ...what??....

A: It is available from the Audio Function button and visibly adjusted via the LCD screen MENU.

Q: 8. Does this amp has a safety protection trip on it ?

A: The manufacturer has not published any specs regarding a fuse link or thermal protection circuit.

Q: 9. Can you send audio to a tablet or phone via. Bluetooth (so that it looks like a mic to the phone)?

A: Audio can not be sent to a tablet or smartphone through the USB port or wirelessly, because the Bluetooth is a receiver only on this unit.. This mixer can be used in conjunction with an iOS interface, such as the IK Multimedia iRig Stream 2-Channel Audio Interface for Mobile Devices, BH #IKIRS and a Hosa Technology Two 1/4" Phone Male to Two RCA Male Unbalanced Cable (Molded Plugs) - 3.3' BH #HO2PM2RM3 in order to send audio to an iOS device.

Q: 10. Can I connect this directly to my computer without any intermediary devices?

A: This mixer supports audio interface functionality via the USB connection to a computer, so no other device would be required. A USB cable is included.

There are no reviews for this product.