Wireless Network Interface Card

Ashly Ne8800ad Network Enabled Digital Signal Processor With 8-channel Aes3 Inputs + Dante Network Card

Product Code: ga147981
Availability: In Stock

$10,497.00 $13,226.22

Qty

0 reviews Write a review

Description
Reviews (0)

Control and protect your sound system with the Ashly ne8800AD, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne8800AD features four option bays for expanded functionality. This model includes the 8-channel AES3 input card and Dante network card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

8 Analog Inputs/8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Wordclock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.5 lb / 4.8 kg

CobraNet, Dante, AES3, Mic Input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. Since there are no preouts ,does this mean that wireless speakers count as such.When all speaker connections are used?

A: A total of 9.2 speakers can be connected to the Sony STR-AZ3000ES 9.2-Channel Network A/V Receiver (B&H # SOTRAZ3000ES). Depending on the connectivity features of a wireless speaker, it can connect to this receiver via Bluetooth or Wi-Fi. A pre-out is not necessary.

Q: 2. Does the front display dim and/or allow to darken altogether?

A: Yes, the Denon AVR-X2800H 7.2-Channel Network A/V Receiver BH #DEAVRX2800H does have a dimmer function in the front.

Q: 3. Is this comparable with an iPad that has USB-C?

A: Yes. iOS devices support class-compliant audio and the Audinate Dante AVIO 2x2 is compatible with devices that have class compliant USB.

Q: 4. I want to buy this beauty my speakers are 8 ohms can I connect a pair of 4 ohms alone with my 8 ohms and have no issues.jbl l100

A: The Onkyo TX-NR6100 is rated to handle 4-16 Ohm speakers.

Q: 5. Will it work in Europe with 220v?

A: I'm sorry, but the version we carry for the Yamaha R-N1000A 2.1-Channel Network A/V Receiver will support 120 V power only. For the 220 Volt power version, you will need to buy from a different region. Please see the list below, from page 151 of the manual https://bit.ly/48Sfqh9: ( [Models for U.S.A. and Canada] AC 120 V, 60 Hz ( [Model for Taiwan] AC 110 V, 60 Hz ( [Model for China] AC 220 V, 50 Hz ( [Model for Korea] AC 220 V, 60 Hz ( [Model for Australia] AC 230 to 240 V, 50 Hz ( [Models for U.K., Europe and Russia] AC 230 V, 50 Hz ( [Model for Asia] AC 220 to 240 V, 50/60 Hz

Q: 6. What Denon rack mount kit model will work with the AVR-X4800H?

A: At this time Denon does not offer a compatible rack mount kit for the AVR-X4800H model.

Q: 7. Current requirement for USB power source? 0.5A, 1A?

A: Audinate has not provided a spec for the amount of bus power used by the Dante AVIO 2x2 USB Type-A I/O Adapter for Dante Audio Network.

Q: 8. Is there a phono input with pre-amp for a turntable?

A: Sony STR-AN1000 7.2-Channel Network A/V Receiver, BH # SOSTRAN1000, has no phone input. To connect a turntable that only has a PHONO output jack, you need to connect a phono equalizer (not supplied) between the turntable and this receiver. Rolls VP29 Phono Preamp (B&H # ROVP29)

Q: 9. Do I need a separate amp to power a passive sub woofer

A: A passive subwoofer connected to the Sony STR-AN1000 7.2-Channel Network A/V Receiver (BH # SOSTRAN1000) should be powered by a separate power amplifier.

Q: 10. Is the USB C Cable detachable?

A: The USB-C cable is removeable.

There are no reviews for this product.