4 Channel Interface

Ashly Ne8800asc Network Enabled Digital Signal Processor With 8-channel Aes3 Inputs + 8-channel Aes3 Outputs + Cobranet Card

Product Code: ga147983
Availability: In Stock

$11,097.00 $17,644.23

Qty

2 reviews Write a review

Description
Reviews (2)

Control and protect your sound system with the Ashly ne8800ASC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne8800ASC features four option bays for expanded functionality. This model includes the 8-channel AES3 input card, 8-channel AES3 output card, and CobraNet card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

8 Analog Inputs/8 Analog Outputs 10/100 Ethernet and RS-232 Interfaces 24-Bit A/D-D/A Audio Resolution Extensive DSP via Protea Software Suite Easy and Intuitive User Interface Wordclock I/O Option Bays for Expanded Functionality Windows

Parameters
Frequency Response	20 Hz to 20 kHz, ±0.1 dB, A>D ±0.25 dB, D>A ±0.25 dB, A>A
Dynamic Range	20 Hz to 20 kHz (Unweighted) >115 dB, A>D >114 dB, D>A >114 dB, A>A
THD + N	1 kHz, +20 dBu Analog (-1.0 dBFS Digital) >0.001%, A>D >0.002%, D>A >0.002%, A>A >0.00001%, D>D
Latency	48 kHz 1.42 ms, A>D 0.90 ms, D>A 2.21 ms, A>A 0.10 ms, D>D 96 kHz 0.71 ms, A>D 0.45 ms, D>A 1.11 ms, A>A 0.05 ms, D>D
Wordclock	Input/Output Type: 75 Ohms BNC Lock Range: 48 kHz ±4%, 96 kHz ±4% Input Impedance: Selectable 75 Ohms or High Impedance Input Voltage Range: 1.0 to 7.0 Vpp Output Impedance: 75 Ohms Output Level: 5.0 Vpp Nominal, Unterminated
Master Clock	Sources Audio Network Wordclock AES3 Internal Crystal Clock Modes Prioritized Auto Switching Manual
Inputs	Analog Line Input Type: Active Balanced Euroblock Input Impedance: 20 Kilohms Maximum Input Level: +20 dB AES3 Digital Input Type: Transformer Balanced Female XLR Input Impedance: 110 Ohms Max Input Level: 7.0 Vpp
Outputs	Analog Output Type: Servo-Balanced Euroblock Output Impedance: 20 Ohms Maximum Output Level: +20 dBu AES3 Output Type: Transformer Balanced Male XLR Output Impedance: 110 Ohms Maximum Output Level: 5.0 Vpp
Other Connectors	10/100 Ethernet Port RS-232 Port Remote Level Control Logic I/O Data In/Out Ports On/Off Switch
Environmental	40 to 120°F / 4 to 49°C Non-Condensing
Power Requirements	90 to 240 VAC, 50/60 Hz 70 W Maximum
System Requirements	Computer Running Under Windows Vista, 7, 8, 10
Dimensions (WxHxD)	19 x 8.5 x 3.5" / 483 x 216 x 89 mm
Weight	10.5 lb / 4.8 kg

CobraNet, Dante, AES3, Mic Input options
10/100 Ethernet and RS-232 computer interface standard
Extensive DSP available
Easy and intuitive user interface
24-bit A/D–D/A audio resolution
32-bit SHARC DSPs
Sample rates of 48 and 96 kHz
Hot-plug software control
Automatic DHCP network IP configuration
Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
FIR filter capability
Advanced automatic feedback suppression
Wordclock input and output
Euroblock connectors for audio, preset recall, DC remote level control and data in/out
Remote controls for level, logic I/O and programmable functions
Third-party control friendly, input and output metering, multi-level security

Input source selection
Brick wall limiter
Compressor
Autoleveler controls
Ambient noise compensation (output only)
Ducking (high/low priority, trigger, filibuster, ducked program)
Gate
Advanced gate controls
Gain
EQ:
- 31-band
- Parametric 2, 4, 6, or 10 band
- High/Low Shelf 6/12 dB per octave
- All-Pass
- Variable Q HP/LP
- Notch/Band-Pass
Feedback Suppressor (inputs only and 48 kHz sampling rate)
Crossover: 2-, 3-, 4-way crossover and High-Pass/Low-Pass filters
Delay:
- Input time, distance, and temperature at 48 kHz sampling rate
- Input time, distance, and temperature at 96 kHz sampling rate
Audio metering tool
Signal Generator Tool (pink noise, white noise, sine wave)
Matrix mixer
Processors

All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network set up time. Multi-level software security with password access assures you a tamperproof audio system.

Related Questions and Answers

Q: 1. Can I connect this mixer's power supply to a European socket?

A: The Pyle Pro PMXU63BT Audio Mixer includes a power supply with a standard plug for use in North America, but you can use it with a step-down transformer like the Watson VCG-SD50 50 Watt Step-Down International Voltage Transformer (B&H # WAVCSD50) to enable compatibility in Europe.

Q: 2. Can I connect this directly to my computer without any intermediary devices?

A: This mixer supports audio interface functionality via the USB connection to a computer, so no other device would be required. A USB cable is included.

Q: 3. Can you send audio to a tablet or phone via. Bluetooth (so that it looks like a mic to the phone)?

A: Audio can not be sent to a tablet or smartphone through the USB port or wirelessly, because the Bluetooth is a receiver only on this unit.. This mixer can be used in conjunction with an iOS interface, such as the IK Multimedia iRig Stream 2-Channel Audio Interface for Mobile Devices, BH #IKIRS and a Hosa Technology Two 1/4" Phone Male to Two RCA Male Unbalanced Cable (Molded Plugs) - 3.3' BH #HO2PM2RM3 in order to send audio to an iOS device.

Q: 4. I'm hoping that microphones are still operative while in any mode ... is that correct?

A: Yes you just have to change the channel from line to mic. Or the other way round.

Q: 5. What devices are available to use with the GPI input on the back? Can I switch between feeds using external hardware instead of USB? How well does this work?

A: No pre built devices that I am aware of that utilize the gpi. However I built a small control box using non latching buttons tied into the GPI and it works great.

Q: 6. Do you offer variable focal length lens for Sentech CCTV camera: STC-HD203SDI?

A: no, I do no. How it is conected with Decimator multiviewers?

Q: 7. how well does this work for podcasting?

A: This mixer by Pyle will be a startig point for podcasting that will eventually be upgraded after growing your skills.

Q: 8. Which EMI/EMC certification does this device meet? And temperature range?

A: The operating temperature range of the DMON-16S is 0ºC to 40ºC and the storage temperature range is -20ºC to 45ºC. Please open the following link to view the Declaration of Conformity for Decimator Design. file:///C:/Users/decastro/AppData/Local/Microsoft/Windows/INetCache/Content.Outlook/6GTD8XI4/DMON-6S_CE.pdf

Q: 9. Is the output line level or mic level, or switchable?

A: The output line level would be switchable on this Pyle Pro PMXU83BT Compact 8-Channel, Bluetooth-Enabled Audio Mixer.

Q: 10. My blue tooth indicates a connection but there is no audio. I had audio for about one minute then it dropped off. Any suggestions as to how to get the audio back?

A: Try turning off the mixer for 12 seconds, then turning it back on and attempt the Bluetooth pairing again. Bluetooth signal in general can be interfered with if there are other Bluetooth devices being used in close proximity. If possible, make sure those other devices are off when using Bluetooth on the mixer. If the connection is made and there's still no audio, please make sure the main level is turned up on the mixer so audio will pass to your speakers. If the problem persists, please give Pyle Pro a call at 800-444-5671.

BritD1	16/08/2024
[This review was collected as part of a promotion.] We placed the sound bar in our movie room connected via Bluetooth to our Samsung projector and it is the best decision we made! It feels like a movie theater sound experience without the sound being too loud in the theater. It's perfect for us. 5

HolyDiver	14/05/2024
[This review was collected as part of a promotion.] Honestly I wasn't sure if soundbars were worth it until I got one. Everything is clearer and sounds amazing. Plus I can connect my phone and computer to it to so it's great for music. 5