Hdmi Bluetooth Receiver For Samsung Tab 5E

Vanco Hdmi Extender Over Cat 5e/6 Cable With Ir And Hdmi Loop Out

Product Code: ga148339
Availability: In Stock

$749.97 $974.96

Qty

0 reviews Write a review

Description
Reviews (0)

Extend your HDMI signal range up to 196' with this HDMI Extender over Cat 5e/6 Cable with IR and HDMI Loop-Out from Vanco. This transmitter/receiver extender pair connects one HDMI video source over single Cat 6/5e cables to a single HDMI display on the receiver end. The transmitter's HDMI loop output port enables you to split the audio and video signals for cascading to additional displays.

The extender set supports video resolutions up to 1080p60 and is HDCP compliant. Features include EDID management via the transmitter or the receiver loop-out, Dolby, DTS and PCM audio compatibility, and EQ adjusting from the receivers. One 5 VDC power supply included with this set, and only one is required to power both units using Power over Ethernet.

Transmitter & Receiver Set Transmits HDMI Video up to 196' Supports up to 1080p60 Video HDMI Loop Out for Split/Cascading Signal IR Pass-Through Control from Rx to Tx Set EDID via Transmitter or Receiver HDCP Compliant Dolby, DTS & PCM Audio Compatible Includes 1 x Power Supply

Transmitter Interfaces
Inputs	1x HDMI Female
Embedded Audio Input	HDMI
Outputs	1x RJ45 (HDBaseT) Female
Transmitter Other I/O	1x 1/8" / 3.5 mm IR Input
Receiver Interfaces
Inputs	1x RJ45 (HDBaseT) Female
Outputs	1x HDMI Female
Embedded Audio Output	HDMI
Receiver Other I/O	1x 1/8" / 3.5 mm IR Output
Standards
HDCP Support	Yes
EDID Support	Auto-Detect
Transmission
Max Transmission Distance	1080p: 196' / 59.7 m (via Cat 5/6)
Video Format	HDMI 1080p: 50/60 fps 1080i: 50/60 fps 720p: 50/60 fps 576p: 50 fps 576i: 50 fps 480p: 60 fps NTSC: 60 fps
DTS Compatibility	DTS
Dolby Compatibility	Dolby Digital
Supported Cable Types	Cat 5/6
Power
Transmitter Power I/O	1x Barrel (5 VDC at 1 A) Input
Receiver Power I/O	1x Barrel (5 VDC at 1 A) Input
PoE Support	Yes
Transmitter Power Consumption	Device: (5 W)
Receiver Power Consumption	Device: (5 W)
General
Certifications	CE, FCC, RoHS
Operating Conditions	32 to 158°F / 0 to 70°C at 10 to 80% Humidity
Storage Conditions	12 to 176°F / -11 to 80°C at 5 to 90% Humidity
Transmitter Dimensions	3.21 x 2.4 x 0.9" / 8.15 x 6.2 x 2.4 cm
Receiver Dimensions	3.2 x 1.95 x 0.97" / 8.2 x 4.95 x 2.46 cm
Transmitter Weight	8.5 oz / 241 g (With Receiver)

196' transmission distance over a single Cat 5e/6 cable
Power over Ethernet (PoE) allows a single power supply at the transmitter to provide power to the receiver
HDMI loop output on the transmitter splits or cascades signals for additional components
IR pass-through from the receiver to the transmitter with provided IR cables
Supports resolutions up to 1080p60
Compatible with Dolby, DTS, and PCM audio formats
Dynamic EDID management
HDCP compliant
Includes 5 VDC / 1A power supply and adapter

Related Questions and Answers

Q: 1. My wife has vision issues and cannot use the viewfinder or small screen on her D750. Can this be used for photography and not video?

A: Yes, The FeelWorld 7" 4K Ultra-Bright Monitor with Loop-Through HDMI will support DSLR/Mirror-less cameras like the Nikon D750. You will be able to project the cameras menu to the display and make the on screen graphics and text larger. Also note the HDMI cable that comes with this kit is perfect for your Nikon D750.

Q: 2. Can you charge a camera with a dummy battery, via the dc 12v port, or is it only an input?

A: You cannot power or charge a camera through this monitor.

Q: 3. Does this Work with RED KOMODO? Anyone try it?

A: Yes, the FeelWorld 7" monitor is compatible with the RED Komodo.

Q: 4. Can this be used as BOTH a source and display emulator at the same time to test a cable? It says it can be a sig gen OR display

A: According to the manual, there is no mention of dual operation being impossible at the same time when using the Vanco Handheld 4K HDMI Tester.

Q: 5. if we're filming in 16:9 aspect ratio, will it show that on the monitor or is image stretched to fit 16:10 aspect ratio?

A: The FeelWorld 7" 4K Ultra-Bright Monitor would not stretch the content. It would correctly show your content in 16:9 aspect ratio.

Q: 6. What is the size of the power input on this monitors and what voltage is required. I'd like to power this from a V-Mount setup, but it's hard to tell what connector and voltage this would require?

A: We are not aware of D-Tap cable that will plug in to the barrel connection this monitor. However, since this monitor is powered by Sony NP-F or L style batteries you could try the GyroVu D-Tap to Sony L-Series Intelligent Dummy Battery (30"). This should work to power the camera off of a V-Mount battery with a D-Tap accessory port. B&H # GYGVDTAPSL - https://bhpho.to/2En12ie

Q: 7. Can i load 3d luts to this monitor?

A: Unfortunately no, there is no way to load LUTs in this monitor.

Q: 8. Hello! Is there a battery plate for Sony BP type batts? If not is there a adapter plate from L to BP batts? .. or Anton Baur Gold mount bricks? I’d hate to have to get yet another battery system to keep track of. Using Sony Fs7. Thanks for any ideas!

A: No, there isn't a BP mount or adapter, but you can use the following L-series dummy battery to d-tap connector https://bhpho.to/2JJpwKw and power from your Gold Mount kit.

Q: 9. Is it possible to detach the FP battery mount so that the unit is flat on the back side? I want to use it with a teleprompter that takes devices like iPads. Thanks!

A: Yes, it is possible to remove the battery mount from the Feelworld monitor.

Q: 10. Is this bright enough to operate outside without a sunshade, since it doesn't appear to come with one?

A: Yes it should be. This is an Ultra Bright 2200 cd/m² monitor.

There are no reviews for this product.