You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Vanco Uhd8k01 Ultra High-speed Hdmi Cable (1')

Vanco Uhd8k01 Ultra High-speed Hdmi Cable (1')
  • Product Code: ga148340
  • Availability: In Stock

$95.97 $148.75

Get the speed you need for UHD and all the features that go with it using the 1' Vanco UHD8K01 Ultra High-Speed HDMI Cable. This certified premium HDMI 2.1 cable is capable of up to 48 Gb/s bandwidth, allowing it to transfer 8K60 and 4K120 video with uncompressed multi-channel audio. The UHD8K01 has been tested to ensure it minimizes EMI, and is UL listed and CL3 rated for in-wall use.

Supports up to 10K30, 8K60 & 4K120 Video    48 Gb/s Bandwidth    HDCP 2.3 & Backwards Compatible    UL Listed, CL3 Rated

Parameters
Connector 11x HDMI Male
Connector 21x HDMI Male
Cable Length1' / 0.3 m
InterfaceHDMI 2.1
HDCP SupportYes, Version 2.3
Additional Feature SupportARC (Audio Return Channel) / CEC (Consumer Electronics Control) / eARC (Enhanced Audio Return Channel) / EDID (Extended Display Identification Data) / HDR
Maximum Resolution Support10240 x 4320 at 30 Hz
CertificationsUL

  • 4 lanes of 12 Gb/s FRL (Fixed Rate Link)
  • Enables transmission of static and dynamic HDR formats
  • Supports uncompressed and compressed modes of transmission
  • Advanced EMI testing to ensure cables minimize wireless interference
  • Up to 32 audio channels
  • eARC certified
  • Supports advanced audio formats like DTS Master, DTS:X, Dolby True HD, Dolby Atmos, and more
  • Support for wide angle 21:9 aspect ratio video
  • Features SecureFit connectors that are pull tested up to 7 lb
  • Supports VRR, ALLM, QFT, and QMS
  • UL listed, CL3 rated

Related Questions and Answers

Q: 1. The photos are not consistent; the first photo shows no adapter (extension) at the mounting plate. Which photo depicts the e-mount version?

A: The photos are of both the sony E mount and canon EF mount. It doesn't use an adapter since they are native lens mounts. Just make sure to choose the lens mount you need for your camera.

Q: 2. Greetings, what trigger can I use with this lamp and is it compatible with Sony a7III?

A: You may purchase either the Godox XProS TTL Wireless Flash Trigger for Sony Cameras, B&H # GOXPROS, or the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Sony, B&H # GOX2TS, to wirelessly trigger the Godox FV150 High Speed Sync Flash LED Light from the Sony Alpha a7 III Mirrorless Digital Camera..

Q: 3. Will this work with my Sony A6000 or is it best with Canon? Recommendations?

A: This flash is compatible with Canon's RT System and not the Sony system. Godox has similar 3rd party flashes for Sony cameras: https://bhpho.to/2PQPe0e

Q: 4. Does this product comes with the control/trigger or the Light stand?

A: The Godox FV150 High Speed Sync Flash/Daylight LED Monolight does not come with a light stand or a remote.

Q: 5. Is it possible to use this flash in groups with my existing speedlights?

A: It should work with other flashes in combination. But it will depend on the other flashes. You will need to use all Godox flashes or attach Godox receivers to the other brand off camera flashes.

Q: 6. what would be the focal length of the 18-35 on the Red Gemini?

A: The Sigma 18-35mm T2 High-Speed Zoom Lens (PL), this item BH #SI1835T2CZPL • MFR #21096 is designed for Super 35. The Red Gemini is uses a Super 35 sensor. The focal length would be the same, there would be no crop factor of vignetting.

Q: 7. How bright and how long is the strobe flash? Watt-seconds? I only understand in standard strobe terminology.

A: The following unit offers 200 Watts. The following photometrics are as followed 1672.2 fc / 18,000 Lux at 3.28' / 1 m

Q: 8. Does this also supply a modeling lamp in flash mode?

A: Yes. As per the manual, "Modeling Lamp/Special Effect Button Modeling lamp ON/OFF: In flash mode, press the modeling lamp/special effects button to turn on or off the modeling lamp. When modeling lamp is on, turn the modeling lamp/special effects button to adjust the light brightness of modeling lamp from 5% to 100%"

Q: 9. What is the watt/sec output for these lights in flash mode?

A: While there is no publish watt/sec rating, we have found the fixture to be usable at 1/200th of a sec, with an aperture of f/8, ISO 100 at about 1 meter from the subject. This is without any modifiers attached to the head.

Q: 10. Will work on MacBook Pro?

A: Just as long as the computer has a standard USB 2.0 connection it will work. This supports Mac OS.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Vizio V21-h8 2.1-channel Soundbar System

$569.97 $792.26

Denon Dht-s316 2.1-channel Soundbar System

$897.00 $1,390.35

Furrion Aurora 130w 2.1 Outdoor Soundbar System

$2,099.97 $2,813.96

Yamaha Yas-209 2.1-channel Soundbar System

$599.85 $893.78

Jvc Th-s560b 500w 2.1-channel Soundbar System

$899.85 $1,268.79

Products You May Like

Tiffen 3 X 4" 1/8 Coral Solid Color Filter

$449.85 $580.31

Msi Meg Prospect 700r Mid-tower Case

$1,139.97 $1,732.75

Filmcraft Studio Blanket (72 X 80")

$149.97 $202.46

Pelican 1730 Transport Case With Foam (black)

$1,817.85 $2,817.67

Camrade Raincover Extension Kit

$507.00 $633.75

Verkada Wireless Glass Break Sensor

$297.00 $412.83

Panasonic Lumix G Fisheye 8mm F/3.5 Lens

$2,393.97 $3,543.08

Portabrace Backpack For Fujifilm X-h2s

$597.21 $925.68