Transmit lossless HD video up to 2500' with the Ranger Micro 2500 3G-SDI/HDMI Wireless Transmitter from Teradek. Redesigned for broadcast, event, drone, and handheld applications, this transmitter can input up to 1080p60 video over HDMI or 3G-SDI with 10-bit HDR support and transmit up to 1080p60 video over a wide 4.9 to 6.4 GHz wireless range, including licensed and unlicensed bands in the 6 GHz U-NII 5 spectrum. The transmitter unit provides a powerful signal that can travel up to 2500' line of sight. It also features an SDI loop output for local monitoring, and one horizontal and one vertical N-type antenna.

The transmitter supports transmission of up to 1080p60 video to up to six receivers and features built-in AES-256 encryption protects your video from prying eyes. It can transmit visually lossless video to any Ranger series receiver with zero delay. The transmitter supports a desktop Launchpad software application or the Launchpad app for iOS or Android that easily connects via Bluetooth 5, which both provide a spectrum analyzer, channel selection tools, and remote configuration.

The unit is powered using a 2-pin DC input, and there are 1/4"-20 and M3 mounting threads to mount your transmitter on a variety of cameras, cages, or rigs.

Transmitter/V-Mount Receiver Set    Supports 4.9 to 6.4 GHz Frequency Bands    Transmit Video up to 2500' Line of Sight    3G-SDI and HDMI Input/Output    Lossless Transmission with Zero Delay    1080p60 10-Bit 4:2:2 HDR Support    Supports Transmission to up to 6 x RXs    Pairs with all Ranger Series Devices    AES-256 Encryption    Launchpad App, Spectrum Analyzer

State-of-the-art hardware. Designed for professional video production. The Ranger Series is powered by Teradek's Emmy and Academy Award-winning technology for zero-delay wireless

video transmission. This model boasts a maximum range of 2500', and it works seamlessly within a variety of professional broadcast, sports, and ENG applications, including handheld gimbals, drones, and shoulder-mounted production cameras.

Pair any combination of Ranger TX and RX together, regardless of model. That means your production can quickly scale and operate a variety of Ranger systems best suited to your environment, despite differences in transmission range. Mixed Ranger systems operate with a range of the lowest paired model. 6 GHz operation requires support on both the TX and RX.

When a delay in audio and video transmission is noticeable, it's nearly impossible to offer a lifelike experience. Ranger's patented zero-delay technology solves this problem. With Ranger, your audio and video signals are transmitted with ultra-low latency, even in 1080p60, providing a visually lossless and engaging experience for your viewers.

• Install the Launchpad app on your macOS or Windows computer, or on iOS/Android phone
• Bluetooth 5 LE connection support
• Pair transmitters and receivers with the touch of a button
• Measure and analyze the frequency and amplitude of a signal
• View live channel strength for licensed/unlicensed bands
• Monitor your live RF spectrum bandwidth

With the number of wireless devices on the rise, and a limited amount of frequency bands to choose from, there is little room for your signal to move without interference or disruption. But with Ranger, you have options: 5 GHz for general use, licensed band frequencies for special events, and the new 6 GHz U-NII-5 band for 12 new channels of uncongested wireless spectrum.

Related Questions and Answers

Q: 1. I see the Ace750 comes with one power supply for the receiver. Can I purchase a 2nd power supply to power the transmitter?

A: Yes, you can use an additional Teradek NIBL 056 AC Adapter (18W, 6' Cable), B&H # TE110058, to power the transmitter in the Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set.

Q: 2. Can the transmitter be powered from the usb-c port?

A: No, The Teradek Bolt 6 LT can not be powered via USB-C.

Q: 3. Does this work with Bolt 1500, Max, and the previous non 6g version?

A: The Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit can work with older Bolt models like the Bolt 4k (750/1500/MAX). Please review the following chart to see all the supported Bolt models: https://bhpho.to/3yO7bpm.

Q: 4. Does Transmitters have a vmount plate? or is this only for the receivers?

A: While the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) only has a V-mount plate for the receiver, you could add the Teradek Single-Battery Plate for Bolt (Female, V-Mount), B&H # TE110854, to the transmitter.

Q: 5. Does the SDI port support 1080P 59.97 In and Out of the transmitter and receiver?

A: No, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit (B&H # TE102260) does not support 1080p at 59.94 fps. The video format is only available through HDMI, though the 3G-SDI port can support 1080i at 59.94 fps.

Q: 6. Will the TX work with a Bolt Receiver?

A: No. The following units run off of two different protocol systems.

Q: 7. Does the HDMI signal of this device contain audio? Can you monitor the camera audio through the receiver?

A: The Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set does transmit audio that is embedded into the HDMI signal. You will be able to monitor the audio output from the receiver. You may need to work with a monitor to de-embed the audio from the signal and provide a headphone port like the Portkeys LH7P below: PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) BH #POLH7PB

Q: 8. Does a wall power adapter come with the receiver?

A: Yes, the Teradek Ranger Micro 750 3G-SDI/HDMI Wireless Transmitter/Receiver Kit (V-Mount) comes with an 18W AC adapter included in the kit.

Q: 9. Can you receive a signal from a Bolt6 750LT transmitter?

A: Yes, you can use the Teradek Ace 750 HDMI Wireless Video Receiver with the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter.

Q: 10. Can this transmit camera control in addition to the video? I have a small hd 702 touch with a red software license for camera control but need to know if this will support it

A: Yes, the Teradek Bolt 6 LT can be combined with SmallHD Smart 7 Monitors and Wireless Camera Control Starter Kits, allowing you to wirelessly control RED, ARRI, and Sony VENICE cameras.