Featuring wireless control up to 49.2' away with an included trigger, the Vision4 Battery-Powered Strobe from Neewer is a 300W monolight suitable for use both in the studio and on the road. It runs on a rechargeable lithium-ion battery with 7800mAh capacity, allowing you to fire the strobe up to 1000 times at full power before needing to recharge. Output can be adjusted manually and goes from full power to 1/64 power, giving you a 6-stop exposure range to work with.

The Vision4 features flash durations ranging from 1/1000 to 1/10,000 second and a color temperature of 5600K, which can vary 200K up or down depending on your settings. Recycling times between 0.4 and 2.5 seconds allow for quick shooting when you need it, while a 13W LED modeling lamp can be used for careful composition. The light accepts a wide variety of optional accessories thanks to its Bowens adapter and dedicated channel for an umbrella. Finally, a 3.5mm sync cord is also included with the product for a wired connection.

Wireless Control with Included Trigger    300W, 6-Stop Power Range    Manual Exposure Control and Multi-Mode    Li-Ion Battery, 7800mAh    Up to 1000 Full-Power Flashes    13W LED Modeling Lamp    Color Temperature: 5600K (±200K)    Compatible with Bowens Accessories

• Battery-powered for cordless location shooting
• Sturdy and durable with metal casing
• Provides Bowens adapter, 1/4" tripod adapter, and umbrella channel
• Environment friendly LED modeling lamp with higher luminous efficiency and longer service life compared with traditional halogen lamps

Related Questions and Answers

Q: 1. can you adjust the exposure from the wireless control or need to do at the back of the strobe?

A: You must control the power from the strobe.

Q: 2. Can I sync more than two Vision 4 lights together?

A: Yes. The following system will all communicate together.

Q: 3. Is the strobe compatible with Sony cameras?

A: Yes, the Neewer Vision4 Battery-Powered Strobe with Trigger & Octagonal Softbox is compatible with Sony mirrorless cameras such as the Sony A7iv.

Q: 4. do you sell a 300w lamp replacement?

A: Unfortunately we do not have a spare flash tube.

Q: 5. Is the Neewer Vision4 Battery-Powered Strobe with Trigger & Octagonal Softbox compatible with canon 90d

A: Yes, the Neewer Vision4 Battery-Powered Strobe with Trigger & Octagonal Softbox is compatible with the Canon 90D.

Q: 6. Which one is for fuji?

A: The included transmitter can work with many different cameras, including those from Fuji.

Q: 7. Is it compatible with Canon EOS RP Mirrorless Camera ?

A: The Neewer Vision4 has not been tested specifically with the Canon EOS RP to our knowledge. The results may vary when using them together.

Q: 8. I need a grid for this flash. What is the size of the reflector?

A: According to the manufacturer, the Neewer Vision 4 Studio Flash Strobe comes with a 7" reflector that accepts 7-inch grids. As such, the Impact 7" Grid (30°), B&H # IMG730, would be a good option if you are looking for a single filter, whereas the Impact 7" Grid Set (10/20/30/40°), B&H # IMG7SK, or the Studio Essentials 4-Honeycomb Grid Bundle for 7" Reflector, B&H # STMR7G101, would be good options if you need a complete grid set.

Q: 9. do you sell extra battery for this strobe?

A: Unfortunately we do not have extra batteries.

Q: 10. Watts compared to guide numbers?

A: Guide number expresses power output in terms of subject distance and aperture opening while a guide number measures the light itself, but watts per second measures the power being used and not the actual light being emitted.