This 13.25L, cement white 14QT Personal Cooler from Pelican can be used to pack everything you need for your weekend trip. With commercial-grade, thick 1.5" polyurethane walls and a freezer gasketed lid, this cooler was designed to hold on to the cold no matter how far you go.

Exterior Measures 18 x 11.5 x 13"    Interior Measures 12.7 x 7.2 x 8.7"    Dry Box Keeps Items Dry    Bottle Opener with Magnet    Inner Tray Keeps Non-Perishables Cool    Holds Two 1 lb Pelican Ice Blocks    Tablet/Phone Easel Slot, Cup Holders

Dry box keeps personal items dry

Bottle opener with magnet

Interior tray keeps non-perishable food cool and dry

Holds two 1 lb Pelican ice blocks

Tablet/phone easel slot and cup holders

Related Questions and Answers

Q: 1. Is the A320 compatible with the A16ii personal mixer?

A: The A320 and A16ii can be used in the same system. If you have a 16 channel setup the A320 will only be used as a 16 mono channel mixer. If you are upgrading to a 32 channel system, the A320 can have 16 stereo Chanel's but the A16ii will only see channel 1-16 and not 17-32. If you are looking to replace the A16ii mixers, yes this will work but the A16ii is a better sounding mixer. The A360 is a much better sounding mixer than the A320 and A16ii, but is so feature packed that it would be a waste to get if you don't have a 32 channel system. I hope this answers your question.

Q: 2. Does the Thermaltake work on your lap. Where does the air enter and exit the cooler?

A: This item can be used on lap however I would recommend using it for solely for table top usage. The air is pulled in through the top and pushed out via the bottom of the unit.

Q: 3. Would this be a good option to use on a gaming system, like the PS4?

A: Technically, the Thermaltake Massive 20 RGB Notebook Cooler is meant for laptops. However, theoretically, you could use it on a PS4, but I cannot guarantee how well it will perform in this case. I would suggest looking for a cooler that is specifically designed for the PS4.

Q: 4. If the beacons and robot are permanently installed in a room and have been centered once do you have to center them every time you power off and back on?

A: Once your beacons and robot are setup for one location, you will not have to center the units again. You will only need to center the units once the robot and beacons are moved to a different location.

Q: 5. Follow up to my previous question. I wanted know if there was a way to pause the tracking (so it doesn't follow you) not pause the recording.? So i can leave camera focused in a certain position until I want it to start following me again.

A: To stop tracking. you will have to turn the tracking watch off. Unfortunately the Move N See Personal Auto-Follow System does not have a pause tracking feature.

Q: 6. Do you need WIFI for the remote to work? What if you are out in a field where there is no WIFI?

A: nope i am in an area that has no wifi or cell reception. I was able to track inside and outside

Q: 7. Is the "INST. IN" in on the Rolls PM351 a 1/4" TRS input that can accept a line-level stereo signal?

A: Yes. The instrument input on the Rolls PM351 Personal Monitor Station uses a 1/4" TRS connector that can accept instruments and line level signal. The line input also uses a 1/4" TRS connector that will accept line level. Both can be used for stereo signal by setting the corresponding mono/stereo switch for stereo input signal.

Q: 8. Is it possible to pause the tracking from the watch if you want it to stop tracking you momentarily?

A: You will have access to stop the video recording when wearing the watch, but the Pixio will continue to physically track the subject.

Q: 9. Can the watch be carried in a pocket? Does it have to be visible to the camera/beacons?

A: It is designed as a watch, so wearing it would be optimal. However line of sight is not required, so it should be possible to use the watch in a pocket rather than being worn.

Q: 10. Can the pm351 pass through phantom power for a mic like SM7B + Cloudlifter?

A: This unit does not provide phantom power.