The Hypercore NEO 9 Mini, in a V-mount, from Core SWX is a compact 14.8V, 98Wh lithium-ion battery that supports a constant 12A draw and peak draw of 16A. With this high output, the battery is designed for cine and broadcast applications, but, of course, it can be used for virtually all other applications as well. At only 4.7" in height and weighing just 1.4 lb, it's also highly suited for gimbal, drone, and other mobile applications. The Hypercore NEO 9 Mini has the ergonomic design, large backlit LCD, and protective over-molded rubberized housing that Hypercore batteries have come to be known for over their past releases, but this NEO 9 Mini version is a lot more advanced.

It's microprocessor-driven like previous Hypercores, ensuring safety and runtime delivery to camera viewfinders or LCDs, but, leveraging the microprocessor, the NEO 9 Mini features an RFID transmitter on the front that lets you monitor the stored battery data via Core SWX's VoltBridgeID iOS app or an RFID reader. Furthermore, the NEO 9 Mini has a more modular design consisting of less cabling, allowing for increased quality. With the different parts installed separately and securely inside the housing, the chance of failure is reduced in case of drops, and servicing the battery becomes a simpler, more efficient process as the different parts install plug-and-play.

In addition to the large LCD, the Hypercore NEO 9 Mini has an LED gauge on the side where the user can easily glance over at it. Other features include 2000 charge/discharge cycles, hibernation mode, and the ability to communicate to cameras as well as chargers with both one-wire and two-wire protocols (see the Features section below). Such an advanced battery wouldn't be complete without peripheral support. The NEO 9 Mini provides a SmartTap D-Tap port and a USB port for powering/charging devices. The SmartTap port lets you power any 12 VDC accessory and transmit battery data if the accessory is able to communicate that information.

The Hypercore NEO 9 Mini is also widely compatible with many different chargers. This V-mount version is compatible with RED, IDX, and Sony V-mount chargers, among others.

4 x Hypercore NEO 9 Mini 98Wh Batteries    Mach4 4A Rapid Quad Charger    V-Mount Batteries, 12A Draw, 16A Peak    Fast Charge at 4A Each Battery    Full Charge in Approximately 1.5 Hours

The Hypercore NEO 9 Mini is a 14.8V, 98Wh lithium-ion battery supporting a 12A continuous draw and 16A peak draw. It's only 4.7" in height and weighs just 1.4 lb.

The battery features an eight-cell design utilizing Panasonic cells.

A multipurpose backlit LCD provides nominal runtime based on a 25W load, remaining runtime once connected to a device and remaining charge time when on a charger.

The Hypercore NEO 9 Mini can communicate with cameras as well as chargers with both one-wire and two-wire protocols.

The packs go to sleep/hibernate when there is no battery usage or movement after a 48-hour period. Once the battery is picked back up, it awakens.

Integrated "smart" D-Tap connector allows users to power any 12 VDC device while also receiving all battery data from the port.

5V USB port allows powering any USB accessory on the set as well as charging mobile devices.

Over-molded, non-slip rubberized housing helps provide cell protection against accidental impacts.

The NEO 9 Mini is firmware-upgradeable via its USB port.

The Hypercore NEO 9 Mini UN38.3 is certified for safer travel (depending on the airline carrier).

The Hypercore NEO 9 Mini incorporates Storage Mode to protect self-discharge and help comply with travel regulations.

Related Questions and Answers

Q: 1. Does anyone know if these batteries can power an Amaran 300 C battery when used with the Aputure two bay inverter?

A: No, the batteries in the Core SWX HyperCore NEO 150 V-Mount 2-Battery Kit with GPM-X2S Dual Charger kit do not have high enough amperage to power the amaran 300c RGB LED Monolight (BH #AM300C). I suggest using the Core SWX Helix Max 275 Lithium-Ion Dual-Voltage Battery (275Wh, V-Mount), BH #COHLX275MXV, instead.

Q: 2. Will this power the Godox Vl150 at full power continuously?

A: Yes, there should be no issue.

Q: 3. would this battery (BH #CONEO150S) work with the charger from this kit (BH #CONEO9S2FC) ? ...and would this battery be a good choice to power a Luxli Taiko or Godox UL 150?

A: Yes, the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (V-Mount) is compatible with the charger from the Core SWX Hypercore NEO 9 Mini 98Wh 2-Battery Kit with Dual Charger (V-Mount). Sure, the Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (V-Mount) is a good reliable battery.

Q: 4. Why does it say: "Add four high-capacity compact batteries to your kit with this Core SWX Hypercore NEO 9 Mini 98Wh 2-Battery Kit with Dual Charger" when therw are only 2 batteries listed?

A: There may have been an error which has now been corrected.

Q: 5. How long does it take to fully recharge a 98Wh Battery? Can it charge both batteries at the same time?

A: The Core SWX GPM-X2S can charge a single battery at a 3A rate or two batteries simultaneously at 1.5A. One 98wh pack can charge in under 2.5hrs.

Q: 6. is there a dual quick charger that will quickly charge? not quite ready to shell out for the 4 battery thousand dollar charger for 2x 147wh batteries. Is there another vmount charger you'd recommend for charging 2 of these Core SWX147wh batteries?

A: Yes, CoreSWX makes a Core SWX Fleet Micro 3A Digital Dual Charger. Core SWX Fleet Micro 3A Digital Dual Charger for Gold Mount Batteries https://www.bhphotovideo.com/c/product/1333720-REG/core_swx_fleet_dm2a_two_position_3_stud_fast.html Core SWX Fleet Micro 3A Digital Dual Charger for V-Mount Batteries https://www.bhphotovideo.com/c/product/1333719-REG/core_swx_fleet_dm2s_two_position_v_mt_fast.html

Q: 7. What's the proper storage level for these? 30% charge? 50% charge? 100%?

A: the recommended storage level for most lithium V mount batteries is 20%-30%

Q: 8. Are the D Tap and USB outlets isolated from each other? I would like to power a BMCC4K Camera and an HDMI monitor from one battery, but have heard of damage to cameras from grounding issues if using a D Tap splitter.

A: We would definitely advise against using any type of D-tap splitter.

Q: 9. Does it communicate battery info to a Red camera?

A: Manufacturer states that it will communicate battery info when using advanced d-tap output.

Q: 10. Can I use the Core SWX PB70C15 D-Tap Wall Charger on the Core SWX Neo 150 Mini 147Wh battery?

A: The Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (Gold Mount) does not list compatibility with the Core SWX PB70C15 D-Tap Wall Charger.