The Da-Lite 24488 87 x 139" UTB Contour Fixed Frame Screen has an ultra-thin bezel and acid etched black aluminum frame for keeping the audience's focus on projected content. The HD Progressive 0.6 surface has a 0.6 gain and 170° viewing angle, with black backing to prevent bleed-through and retain brightness. Its low-profile flat-panel design allows it to sit 1.38" off the wall. The front lip of the bezel is .25" wide all around the viewing surface, which sits .13" off of the inner frame component.

The HD Progressive 0.6 surface is used with moderate to high output projectors or applications where projector brightness and screen size require low gain. The seamless light gray surface compensates for a brightly lit environment so that image contrast is preserved. In low ambient light, HD Progressive 0.6 provides deep contrast for a rich, enhanced image, and is typically used with video. The screen comes with reinforced black binding on all four sides. The surface wraps around the frame and attaches to it with metal grommets. The HD Progressive 0.6 surface can be cleaned with mild soap and water, and is flame-retardant and mildew-resistant. It is also GREENGUARD GOLD Certified.

164" Diagonal    16:10 Wide Format    Ultra-Thin Bezel Frame    Acid Etched Black Frame    HD Progressive 0.6 Surface    0.6 Gain & 170° Viewing Angle    Black Backing Retains Brightness

Related Questions and Answers

Q: 1. Can this be used as carry-on luggage for airline travel?

A: This case has exterior dimensions of 23 x 18.75 x 16 , carry-on size is usually 22 x 14 x 9 . It may be just a bit too large for Carry-On.

Q: 2. can this be hung?

A: Yes, the MCS Box Frame - 8x10" can be hung, it has 3 perforated holes in the back for hanging.

Q: 3. When folded up, are the rails 42 long or do they split in the middle and collapse to about 21 ?

A: It is 42 inches when broken down. It does not split in the middle.

Q: 4. How could I place this overhead on two c-stands when shooting out doors?

A: The tubing of the Chimera Frame for Frame/Panel Reflectors - 48x48" (B&H# CHFP4848) is designed to be inserted in the grip head that is used on a typical C stand. Here's an example of one: Impact Grip Head for Lights and Accessories - 2.5" Diameter (Chrome) (B&H# IMKCP200) https://bhpho.to/3E1M6oC Here's how it looks (albeit with a different but somewhat similar product) when attached: https://bit.ly/3jn2qIK In your use case you'd attach the side of the frame (on each side) to your C-stand using a grip head like the one mentioned earlier.

Q: 5. How long is it when it's folded?

A: Approximately 44".

Q: 6. Does this come with come kind of carrying case?

A: No, I had to purchase a carry bag separately.

Q: 7. Are all the dividers featured in the 4th picture included? It's a confusing listing because on the specs page it says it only comes with 2 dividers - could someone please clarify for me?

A: You put this in the ad for a different case. Having said that, the Ape case comes with all pictured dividers. I have removed at least two to make room for my MKIII with a lens attached, my flash, and my 70-200 and still have room for 3 other lenses, batteries, chargers, etc.

Q: 8. Is there an optimal way of breaking it down? When I do so, the elastic is extremely taut. Will it snap?

A: The elastic on the Chimera Frame for Frame/Panel Reflectors - 72x72" is tight but should not snap when breaking it down or setting up. The Chimera Frame is a great product. However, if you are looking for a product with a quick setup check out the Intellytech HC Fast Frame Scrim Diffuser with Grid (5 x 6.5').

Q: 9. I'd like to see the back. How do I mount a photo - do I have to take the frame apart? Like with 8 screws in the corners?

A: The MCS Multipurpose Picture Frame - 8.5 x 11" - Black comes a part via pressure to allow you to put a print into it.

Q: 10. Does the frame break down into 3 foot pieces or only 6 foot pieces?

A: The frame breaks down into 3' pieces.