The red Olight Warrior Nano Rechargeable Flashlight packs big functionality into a compact everyday-carry design. The Nano provides six brightness levels up to 1200 lumens, controlled by a side switch for output level and a tail switch for momentary-on. The tailcap is magnetized so you can affix the Nano to any metal surface for hands-free use—or to the included steel L bracket, a neat way to store the light. Its 1100mAh battery will power the light on the lowest setting for 40 days and recharges by means of a snap-on magnetic charging cable.

1200 Lumens Peak Output    6 Brightness Levels Plus Strobe    Side Switch for Output Levels    Tail Switch for Momentary-On    1100mAh Battery, up to 40 Days Runtime    Magnetized Tail for Hands-Free Use    Steel L Stand    2-Way Stainless Steel Pocket Clip    Waterproof & Impact Resistant

• Cool white LED
• TIR optic lens
• 984' beam distance
• Turbo: 1200/450 lumens, 3/77-minute runtime
• Half Turbo: 600-400 lumens, 10/75 minutes runtime
• High: 400/60 lumens, 85/35 minute runtime
• Medium: 60 lumens, 10 hours runtime
• Low: 15 lumens, 36 hours runtime
• Moon: 0.5 lumens, 40 days runtime
• Lockout mode prevents accidental activation in pocket or bag

• Side switch controls six modes for daily use
• Tail switch for momentary-on tactical use

• Aluminum alloy housing
• Magnetic tailcap for hands-free use
• L-shaped steel bracket to hang light while not in use
• IPX8 waterproof
• 1100mAh, 18650 battery
• MCC-1A USB magnetic charging cable
• 2-way pocket clip

Related Questions and Answers

Q: 1. ID there a way to extend this cable?

A: We do not know of a compatible extension cable for the Tilta Nucleus-Nano Run/Stop Cable for RED DSMC2 Cameras.

Q: 2. Will Manfrotto R501,47 Rubber Pads work as replacements for the thin plastic strips inside this Nano Clamp (to be used to protect what it's clamped to)? https://www.bhphotovideo.com/c/product/777682-REG/manfrotto_r501_47_rubber_pad_set_of.html

A: Yes, the Manfrotto R501 rubber pads can work as replacement pads for the nano clamp.

Q: 3. Does this cable work with Tilta Right Side Advanced Focus Handle(with Run/Stop function)?

A: The Tilta Advanced Side Handle Run/Stop Cable for RED KOMODO Camera will work. https://www.bhphotovideo.com/c/product/1607246-REG/tilta_rs_ta3_rd4_advanced_side_handle_run_stop.html

Q: 4. Will this cable work with bbox from wooden camera for komodo? Seems like there is 4 pin lemo here abs 4pin lemo in bbox

A: Yes it should.

Q: 5. Would like ask if you have a kit, that has a receiver, transmitter and a battery power?

A: You can find a bundle that includes the Amimon CONNEX Nano HDR Camera, a transmitter, and a receiver here: https://bhpho.to/3rIoYIi.

Q: 6. Would like ask if you have a kit, that has a receiver, transmitter and a battery power?

A: The only kit we carry from Amimon is the Amimon CONNEX Outdoor Digital Wireless Video System Kit. https://www.bhphotovideo.com/c/product/1689835-REG/amimon_amn7000odr01_connex_outdoor_kit_in.html

Q: 7. Can this cable support electronic focusing of EF lenses VS just start / stop?

A: This is just a start/stop cable.

Q: 8. Can I still sync Nikon SB900/800 remote flashes thru the camera when using the Nano to fire them?

A: A RadioPopper Nano Transmitter B&H # RANANOT would need to be on the camera's hot shoe to fire any Nikon flash attached to a Nano Receiver off camera. You would not be able to use an on camera flash in conjunction with the Nano Transmitter.

Q: 9. Can I put an M.2 SSD of a different brand into this shell (for example a Samsung 970 Evo plus) or will that cause problems?

A: The KineMAG Nano 1TB has a built-in NVMe M.2 1TB SSD that is specially optimized, which gives the KineMAG Nano 1TB two superior safety features: Read-only and RAID 5. We suggest working with the Kinefinity Nano body if you want to install your own NVMe M.2 SSD (2280) media. Please note that the Kinefinity KineMAG Nano 1TB SSD could be removed and replaced with your own NVMe M.2 SSD (2280) as well. Kinefinity KineMAG Nano Body (Empty): BH #KIMAGNANOBDY

Q: 10. Hi Guys, I intend to use that clamp on my Benro GH2 gimbal arm which is exactly 35.6mm thick but the clamp opens up to 35mm wide. Can someone tell me if that should be fine? Thanks a lot

A: If your leg is bigger than the clamp it will not fit.