The 25' Accu-Cable XLR Male to XLR Female Balanced Audio Cable from American DJ features a 22 AWG conductor and a spiral copper shield that thwarts interference. A highly flexible PVC outer jacket allows for easy handling while gold-plated connector pins enhance conductivity.

22 AWG Conductor    Spiral Copper Shield    Highly Flexible PVC Outer Jacket    Gold-Plated Connector Pins

Related Questions and Answers

Q: 1. I have a Colbor CL 100 but I don't have a proper cable to connect my V-mount battery to this light. Is this the right cable?

A: The COLBOR CL100X Bi-Color LED Video Monolight BH #COLBORCL100X would use the BH #COVC50 cable.

Q: 2. I'm sorry, I should have clarified my last question - I was asking if the stud/spigot that mounts to the base clamp is 5/8" in width? I'm planning on using a different clamp with a 5/8" receiver. (BH#SACSGC) Thank you.

A: The base stud/spigot is not specified.

Q: 3. If I want to connect my Røde videomicro to a recorder or mixer with an XLR input should I use this and switch on phantom power or will a dummy 3.5mm to XLR suffice without phantom power?

A: The VideoMicro does require plugin power. So yes, you will use the VXLR Plus to convert Phantom to Plugin.

Q: 4. Will the Lav mic came with the "Sennheiser G3" work with the "Rode VXLR PRO" when connecting to a mixer-recorder such as the MixPre ? Does it accept the screw lock from the "G3's lav" TRS connector? Thank you for the answers.

A: Yes, the Rode VXLR PRO adapter can be used with a Sennheiser lavalier microphone to enable connection to an XLR mic input on a mixer/recorder such as a Sound Devices MixPre model. The VXLR PRO has a threaded female 3.5mm TRS connector on one side to attach the mic and a male XLR connector on the other end allows the mic to be plugged into an XLR input. Additionally, the adapter converts 48V phantom power into plug-in power so you can safely provide power to the mic.

Q: 5. Am I correct, when assuming that one could use a y-splitter and 2 of these to “symmetrize” the Sound Devices Mixpre 3/6 unbalanced trs outputs?

A: No, the VXLR Pro is not intended for use with a line level audio signal. It is intended for use with a microphone that has a 3.5mm TRS connector that requires plug-in power and enables connection to an XLR mic input that supplies phantom power and it will convert phantom power to plug-in power. It would certainly help to have more information about what type of device or input you will be connecting the line output from the MixPre-3 or 6 to. Since you are sending line level audio from a single 3.5mm TRS output and want to split it to two balanced XLR male connections, it sounds like what you need is a direct box like the Kopul SDI-PPC Stereo Multimedia Passive Direct Box (B&H # KOSDIPPC). This direct box has a stereo 3.5mm input and will allow you to split the output from the MixPre-3 or 6 to left and right balanced XLR outputs. Please contact us by phone or through live chat on the website if you would like further assistance.

Q: 6. I need to connect a Rode Go ll to a mixer board. What do I need cables or adapters

A: You can use a standard cable with 3.5mm TRS male and XLR male connectors such as the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 1.5' (B&H # KORSMXM015) to connect the Rode Wireless GO II Receiver to the input on a mixer. Another option is to use an XLR adapter with the 3.5mm TRS cable that is included with the Wireless GO II System. For the XLR adapter, you can use the Rode VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR).

Q: 7. What battery does it take?

A: The Battery The unit uses an A23 battery which is located in the Sender. The positive end of the battery should be pointed inwards, away from the cap Twist the cap to turn the unit on or off.

Q: 8. My guess is that you can’t, but is it possible to only buy the phantom power converter?

A: The RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter adapts an XLR input with phantom power to a 3.5mm input with plugin power. There is no consumer device that does this without any connectors, although some type of OEM circuit may be available from electronics suppliers if you are working on a custom build.

Q: 9. Is the Pro Tools First software the same one I can download for free on their website or is this an upgraded version?

A: Hello, Pro Tools First should be the exact same anywhere you can find it.

Q: 10. Does this include the permanent desk mount shown in photo? (Or just clamp)

A: Yes. There are two mounts included with the BA-XE4. One is the C-clamp mount and the other is the permanent flange mount.