Shure Dual Channel Wireless Ear Microphone Set

Shure P10t Dual-channel Wireless Transmitter Kit With Four Bodypack Receivers And In-ear Headphones (j8a: 554 To 608 + 614 To 616 Mhz)

Product Code: ga149667
Availability: In Stock

$23,673.00 $29,827.98

Qty

0 reviews Write a review

Description
Reviews (0)

The P10T Full-Rack Dual-Channel Wireless Transmitter from Shure is a wireless transmitter for the PSM 1000 system. It can be used to deliver pristine RF signal and audio quality for professional touring applications when paired with Shure P10R or P10R+ wireless diversity bodypack receivers (sold separately) for live stage and theater events or permanent installations.

Built with an all-metal chassis, the dual-channel P10T allows for up to 2 programs to be transmitted simultaneously on different frequency channels. The P10T features balanced 1/4" and XLR connections as well as a 3.5mm headphone jack on the front for monitoring. Its 56 MHz bandwidth offers a wide tuning range to provide stable transmission. Other features include: LCD display, RF mute switch, IR scan with P10R bodypack for RF sync, networked remote control via Wireless Workbench software, and PSM900 backwards compatibility.

For Four Musicians or Performers Dual-Channel Rackmount Transmitter Includes Four P10R Bodypack Receivers Includes Four SE425 In-Ear Headphones 56 MHz Tuning Bandwidth Networkable via Ethernet Wireless Workbench Software Control Switchable RF Output Power All-Metal Chassis Includes Antennas

Specifications
RF Carrier Frequency Range	J8A: 554 to 608 + 614 to 616 MHz
Compatible Frequencies	Per Band: 39
Tuning Bandwidth	56 MHz
Operating Range	300' / 90 m (Environment Dependent)
Frequency Response	35 Hz to 15 kHz (±1 dB)
Signal to Noise Ratio	90 dB (Typical) A-Weighted
Total Harmonic Distortion (THD)	Ref. ±34 kHz Deviation at 1 kHz <0.5% (Typical)
Companding	Patented Shure Audio Reference Companding
Spurious Rejection	Ref. 12 dB SINAD: >80 dB (Typical)
Frequency Stability	±2.5 ppm
MPX Pilot Tone	19 kHz (±0.3 kHz)
Modulation	FM (±34 kHz Deviation at 1 kHz) MPX Stereo Ref.
Operating Temperature	0 to 135°F / -18 to 57°C
Transmitter
RF Output Power	Selectable: 10, 50, 100 mW (+20 dBm)
RF Output Impedance	50 Ohms (typical)
Power Requirement	Input: 100 to 240 VAC, 50/60 Hz, 0.5 A Max (5.5, with Outlet Loaded) Output: 100 to 240 VAC, 50/60 Hz, 5 A Max, Unswitched
Audio Input	Combination XLR-1/4" /6.3 mm TRS
Polarity	XLR: Non-Inverting (Pin 2 Positive with Respect to Pin 3) 1/4" / 6.3 mm: Tip Positive with Respect to Ring
Configuration	Electronically Balanced
Impedance	70.2 Kilohms (Actual)
Nominal Input Level	Switchable: +4 dBu, -10 dBV
Maximum Input Level	+4 dBu: +29.2 dBu -10 dBV: +12.2 dBu
Pin Assignments	XLR: 1=Ground, 2=Hot, 3=Cold 1/4" / 6.3 mm TRS: Tip=Hot, Ring=Cold, Sleeve=Ground
Phantom Power Protection	Up to 60 VDC
Audio Output
Connector Type	1/4" / 6.3 mm TRS
Configuration	Electronically Balanced
Impedance	Connected Directly to Inputs
Physical Characteristics
Dimensions	1.7 x 19.0 x 13.5" / 4.3 x 48.3 x 34.3 cm
Weight	10.4 lb / 4.7 kg
Packaging Info
Package Weight	15.695 lb
Box Dimensions (LxWxH)	27.5 x 17.2 x 6.1"

Full-rack dual-channel transmitter in a professional touring-grade chassis

72 MHz wide tuning range provides flexibility and performance in crowded, unpredictable RF environments

Networkable-over-Ethernet connection to provide comprehensive frequency coordination and transmitter remote control via Wireless Workbench software:
- RF mute enable/disable
- RF output power adjustments
- Aux/line level
- Audio input level
- Channel/device name edit
- Firmware updates

Backwards compatible with PSM900 receivers

RF Mute Switch allows system setup without causing RF interference

Sync RF scan information from a P10R bodypack quickly and easily over IR link

Switchable 10/50/100 mW output power provides a robust RF link in a variety of performance environments

Spectrum display provides a detailed frequency plot on the menu screen with selectable zoom

Front-panel audio input gain adjustment and LED level meter with clipping indicator

Exceptional transmitter linearity vastly reduces frequency intermodulation, allowing more compatible channels per frequency range

High-contrast LCD with grouped menu items provides an intuitive user interface

Front or back mountable antennas

Compatible with PA421A and PA821A antenna combiners

Loop out connectors for multiple mix setups and easy installation

Switchable +4 dBu and -10 dBV input level

Balanced, 1/4" and XLR connectors

3.5mm headphone out on the front panel for easy monitoring

Related Questions and Answers

Q: 1. If rechargeable batteries are in this unit, can it be recharged via USB?

A: No. This will not work as a charger.

Q: 2. Can it have interference with wireless microphones?

A: Yes, it should work just fine.

Q: 3. Is the Sony URX-PO-3D compatible with the sonyUTX-M40?

A: Yes, the UTX-P40 plug-on transmitter is compatible for use with the URX-P03D dual-channel receiver. Just be sure that both items operate on the same frequency band.

Q: 4. is this compatable with URX-P40?

A: Yes, the Sony UTX-P40 Wireless Plug-On Transmitter is compatible for use with a Sony URX-P40 Camera-Mount Wireless Receiver, as long as both components operate on the same frequency band.

Q: 5. Can you use it for live band applications?

A: I don't think it will work out

Q: 6. does the transmitter have a microphone?

A: The transmitter does NOT have a microphone. You will need to plug in a microphone.

Q: 7. Does it work with an iPhone/Oticon Companion app and Oticon hearing aids, similar to the Oticon TV transmitter?

A: The HamiltonBuhl ALS700 Assistive Listening System with Transmitter and 6 Bodypack Receivers with Earbuds (75.5 and 75.9 MHz), BH # HAALS700, will not pair or broadcast to third-party devices.

Q: 8. What is the best frequency band for the US West coast?

A: There is no one specific frequency band that is best for the US West Coast. The Sony UTX-P40 Wireless Plug-On Transmitters for the UC14 and UC25 bands each have 2,772 auto-scan frequencies within the band. This means that there are 2,772 individual frequencies that the wireless microphone system scans to automatically select the clearest one to use for transmitting audio. The UC90 band has 654 auto-scan frequencies within the band. The UTX-P40 Transmitter will need to be used with a compatible Sony wireless microphone receiver that operates on the same frequency band.

Q: 9. Can a specific frequency be dialed in on this system or does it always auto scan for a clean frequency?

A: Yes, it is possible to select a specific transmitting frequency manually for the Sony UTX-P40 Wireless Plug-On Transmitter and wireless receiver instead of using the auto-scan feature for pairing the transmitter and receiver.

Q: 10. Can I buy 4 systems with 4 separate channels for 4 language class.

A: This system would not work for 4 channels of transmission. I would recommend the VocoPro SilentPA-Tour10 - Portable 16-Channel Wireless Listening System (Bodypack Transmitter, 10 Users), BH #VOSILNTPTR10. which allows up to 16 user selectable channels. This would give you the ability to have 4 transmitters sending out individual programs simultaneously to as many receivers as you wish.

There are no reviews for this product.