Monitor your 4K HDR video on the M5 5.5" 3D LUT 4K HDMI Touchscreen Monitor by Shimbol with its 1200 nit brightness, 1000:1 contrast ratio IPS screen with viewing angles up to 160 degrees, and built-in HLG mode and PQ support. The M5 monitor is calibrated to cover 100% of the Rec. 709 color space with a low Delta E of 0.6 for color accurate monitoring, supports resolutions up to DCI 4K25 or UHD 4K30, and features extensive monitoring tools such as 17- and 33-cube 3D LUT monitoring. The aluminum housing encloses a passively cooled design, which is possible due to its low power consumption of 3.5 to 6.5W, for a lightweight, quiet, and capable on-camera monitor.

1920 x 1080 Touchscreen Display    Up to DCI 4K25 and UHD 4K30 HDMI Input    1200 cd/m² Brightness    HDR Monitoring, 3D LUT Support    Scope, Marker, Focus, Exposure Tools    Backlight, RGB, Temperature Adjustment    Three Custom Function Buttons    Embedded Audio, 3.5mm Headphone Port    Power via L-Series/F970 or DC Input

• In the scope menu, find your waveform, RGB parade, histogram, and vectorscope to facilitate color and exposure monitoring of your scene.
• In the focus menu, find adjustable peaking and zoom functions to assist with focus.
• Load 17- or 33-cube 3D LUTs in the color menu through the SD card, adjust your gamma from 2.2 to 2.6, toggle HLG mode or PQ for HDR monitoring, and adjust the color temperature.
• False color allows for quick and accurate exposure adjustments.
• The mask feature provides aspect ratio guides.

• The top of the monitor features a power button and three programmable function buttons for your most used monitoring tools.
• On the left are two HDMI 1.4 ports, one input, and one output, as well as a DC input for extended power.
• On the right is an SD card slot used to load up to 99 custom LUTs in addition to the eight log-monitoring LUTs included. A 1/4"-20 mounting thread below gives vertical or side-mounting options, and a 3.5mm input allows for audio monitoring. Levels are displayed on the monitor as well.
• Another 1/4"-20 thread on the bottom is for conventional on-camera mounting. The adjacent USB-C port facilitates firmware updates.
• At the rear is an L-Series/F970 battery plate for mobile power.

Related Questions and Answers

Q: 1. Would this DC power cable fit the power input on the monitor? https://www.bhphotovideo.com/c/product/1539258-REG/camvate_c2399_

A: Yes, the DC input of the Shimbol M5 display is Inside diameter: 2.1MM; outside diameter: 5.5MM allowing the CAMVATE D-Tap to DC Barrel Cable to be used as a DTAP power cable with the display.

Q: 2. Can it be used in vertical mode? To record shorts and reels

A: Yes, the Shimbol M5 5.5" 3D LUT 4K HDMI HDR Touchscreen Monitor can be used in vertical mode but the footage will need to be imported to your choice editor in 9:16.

Q: 3. What power cable works with this recorder?

A: The Shimbol Memory I 5.5" 3D LUT 4K HDMI Touchscreen Recorder/Monitor can operate off of wall power with the Watson Pro 12V 2A Power Supply (2.1mm). You can also use a dummy NPF battery to D-tap.

Q: 4. What is the max SD card capacity this will support? How long can you record at high quality?

A: The max SD card capacity the Shimbol Memory I 5.5" 3D LUT 4K HDMI Touchscreen Recorder/Monitor will support is 512GB. A single recording file can reach a max size of 3.6GB.

Q: 5. Would this monitor fit the Sony a7rv camera? What accessories do I need to buy for use when I purchase this monitor? Thank you.

A: Yes, the Shimbol M5 5.5" 3D LUT 4K HDMI HDR Touchscreen Monitor is compatible with the Sony A7RV Mirrorless Camera. You will need NPF batteries to power it, an HDMI cable to get a signal, and a way to mount it to the camera.

Q: 6. What are the bitrates? It doesn't appear anywhere I've looked.

A: The Shimbol Memory I 5.5" 3D LUT 4K HDMI Touchscreen Recorder/Monitor has LT, HQ and XQ MP4 8 bit up to 1080 60p HD recording modes. It can work with 32GB to 512GB SD cards for recording. Shimbol says the bitrates of LT 8Mbps, HQ 16Mbps and XQ 24Mbps.

Q: 7. Does it come with a power cord?

A: No, the power cord is not included. The power options are either using Sony L series batteries such as, Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit BH #GENPF770CS • MFR #BCK-2NPF2CH4400, or the DC barrel port.

Q: 8. Does this record 4K video or just accept a 4K signal and down sample to 1080?

A: The Shimbol Memory I 5.5" 3D LUT 4K HDMI Touchscreen Recorder/Monitor records to files that are up to 1080p60 recording to an SD card and down converts from a 4K input to HD.

Q: 9. Is this Daylight Viewable?

A: Yes, the Shimbol Memory I 5.5" 3D LUT 4K HDMI Touchscreen Recorder/Monitor is daylight viewable.

Q: 10. This is hdmi to sdi and sdi to hdmi cross conversion?

A: No, the Shimbol M7 7" Touchscreen 4K HDMI/3G-SDI Video Monitor with 3D LUT Output supports SDI to HDMI signal cross conversion.