Resurrecting the famed MoogerFooger MF-102, the RingerBringer from Warm Audio is an all-analog ring-modulation pedal ideal for generating layered frequencies and harmonics on guitar, bass, synths, and more. With LFO, Mod, Freq, and Rate controls, the RingerBringer delivers wild sonic possibilities limited only by your creativity.

Just like the original model favored by famous '90s musicians like Jonny Greenwood and Trent Reznor, the RingerBringer offers extremely versatile 1/4" I/O including dedicated LFO Out and Carrier In/Out jacks, as well as CV inputs for Rate, Amount, Mix, and Freq. You also get switches for sine or square LFO waveforms and Hi or Lo frequency range. The universal Drive control lets you dial in the perfect amount of ultrawarm drive for your instrument tone. The RingerBringer can operate with either a 9 to 12V power adapter or via a 9V battery.

Recreation of MF-102 MoogerFooger    Sculpt Complex Guitar Tones    Add Harmonic Overtones and Warp Synths    LFO, Mod, Freq, and Rate Controls    100% Analog Circuitry    Hand-Selected Op-Amps and Transistors    Dedicated LFO Out & Carrier In/Out Jacks    Rate, Amount, Mix, and Freq CV Inputs    Custom Metal Enclosure with Wood Sides    Hand-Tested in Austin, TX

From light lo-fi modulation all the way to the piercing sound of infinity ring modulation, the Warm Audio RingerBringer accurately recreates a famous boutique effects processor from the '90s, used by music's most trailblazing artists to create unconventional and otherworldly tones. With its black-panel metal chassis and wooden end pieces, the RingerBringer evokes the beloved timeless look of its inspiration.

Just like the original, RingerBringer connects to any instrument or line-level signal for tonal experimentation and sonic manipulation. On everything from guitar to synth to bass, design your own sounds from the ground up by exploring and manipulating an expansive range of frequencies and harmonics.

Through its numerous inputs/outputs and distinctive controls, RingerBringer delivers all of the sonic sculpting power of the original otherworldly effects processor. Key controls for LFO amount, LFO rate, LFO Waveform Switch, Modulator frequency, and Modulator Mix provide access to endless tone-shaping possibilities.

Unlike digital emulations, RingerBringer uses a 100% analog signal path featuring premium TL072ADR op-amps and hand-selected MMBT3904 transistors to deliver the full analog experience of true tone experimentation. The RingerBringer delivers true-to-spec performance of the original.

Like all Warm Audio gear, every single RingerBringer is meticulously hand-tested and inspected by trained and passionate technicians in Austin, TX USA.

Related Questions and Answers

Q: 1. Will this mic work in digital mode, using only a usb-c cable, to connect to a DJI Osmo Action 3 or 4 cameras? Thanks

A: Yes, the Comica Audio VM10 PRO Shotgun Microphone will work with a USB-C cable to connect to a DJI Osmo Action 3 and 4 cameras.

Q: 2. I just bought this Analog to SDI,for Sony nxcam hxr-nx3/1 to BM ATEM. Can anyone help how to setup up?

A: Not much to set up. As I recall there are some switches on it to set as. I connected it and flipped the switches until I stumbled onto the right combination.

Q: 3. How many analog signals in the input and SDI outputs?

A: There is one input, and two SDI outputs.

Q: 4. Can the Decimator 2 simultaneously downconvert the input to composite while passing through the original format to HDMI?I want to input 720p59 over HD-SDI and output both 720p59 over HDMI and downconverted NTSC composite (anamorphic).

A: From what I have read, yes it can, however I will double check and get back to you. However, I am using 1080p/60 so there may be a difference for you. But this thing is fantastic

Q: 5. I have a video switcher with Program out via SDI, I am told there is embedded audio running out with the SDI video signal. Will this unit work for my application? I want my SDI PRGM output from my switcher to feed into a standard LCD TV monitor via HDMI with video and sound. I want to set up client monitors in the Greenroom down the hall .. All my SDI feed does for my consumer HDMI TV is video only...Thanks

A: Hi James, This is Jules from Symbiosis, Decimator's Master Distributor for your territory. The Decimator 2 will all you to pass both video and embedded audio from the SDI input to the HDMI output for monitoring on your LCD TV. Just in case you need it, there is also a pair of analog line level outputs for driving an amplifier or set of active speakers as well. I hope this helps. Jules

Q: 6. What type of cable do I need to communicate with this unit and Cable from this to my iphone?

A: The Blackmagic Design Mini Converter Analog to SDI accepts analog signals. Current iPhones and their lighting to AV out is are digital, HDMI signal. It would be optimal if you use a lightning to HDMI adapter and then an HDMI to SDI converter, but if you wish to complete this connection to the Blackmagic Design Mini Converter Analog to SDI, please see the items below: Apple Lightning Digital AV Adapter - https://bhpho.to/3M1e1tx Pearstone High-Speed HDMI Cable with Ethernet (Black, 6') - https://bhpho.to/3sjzJRF Atomos Connect Convert Scale | SDI/HDMI to Analog - https://bhpho.to/3M1SSPR 3 x Pearstone 6' SDI Video Cable - BNC to BNC - https://bhpho.to/33RpvOZ

Q: 7. Which converter is adequated to edit analog video from an old Sony PVW- 2800 & Panasonic AJ-D440P to a MacBook pro Retina?

A: You would actually need a capture device, not a simple converter, to ingest the footage from analog sources. If your MacBook Pro Retina has a Thunderbolt Connection the Blackmagic Design UltraStudio Express would be a great choice, B&H #BLUSEXPRESS. It has breakout cables that offer Composite, Component and S-Video inputs for older analog sources.

Q: 8. Does this warm bounce fits on top of Godox Ving V860III flash?

A: Yes, the Vello Warm Bounce Dome will work with the Godox V860Viii.

Q: 9. Is there a way to go from VGA to BNC male for this? Would RGBHV work if I just didn't use the H & V cables?

A: Most likely not. RGB does not carry sync, so you would need H and V inputs. You will need a VGA to SDI scaler. Hope this aswers the question

Q: 10. If I connect component video and analog audio to this converter and run SDI cable (RG6), can I plug the SDI cable directly into my HD TV at the destination (without further conversions)?

A: As long as the source is producing a signal with resolution and frame rates compatible with Blackmagic Mini Converter Analog to SDI.