The WAVE 64x64 12G-SDI Crosspoint Router from Matrix Switch is a midsize routing switcher housed in a compact 4 RU frame. It provides 64 BNC inputs and 64 BNC outputs that support video signals up to 12G-SDI. Control options include an integrated web browser for IP control, RS-232 and RS-422 serial control, and compatibility with separately available controllers.

64 x BNC Inputs and 64 x BNC Outputs    Flexible Crosspoint Routing    Supports up to 12G-SDI Video    Integrated Web Browser for IP Control    RS-232 and RS-422 Serial Port Control    Works with Separate Control Panels    1 x 10/100/1000 Ethernet Port    Thin, 4 RU Fanless Design    Redundant Power Supply Option    Separately Available 2nd Fan Option

• The high-density WAVE RTR 64x64 router uses full-size 75-ohm BNC connectors to support up to 12G-SDI video signals.
• Supported signals include 3G/6G/12G-SDI, HD, SD-SDI, ASI, and MADI.

Related Questions and Answers

Q: 1. Will it work as a second monitor on a mac?

A: You can connect the extended or mirrored desktop into this converter via HDMI and connect an SDI monitor to the output if you wish.

Q: 2. Will this down convert from 4k HDMI to HD SDI?

A: From the BMD website: HD up and down conversion But the manual is useless and doesn't elaborate further.

Q: 3. Does this work with the Blackmagic Design Studio Fiber Converter?

A: No. The Studio Fiber Converter can only connect to the Camera Fiber Converter using a SMPTE fiber cable. The signal is not compatible with the Mini Converter Optical Fiber.

Q: 4. does this convert from video over fiber to 12G SDI?

A: Yes, the Blackmagic Design Mini Converter Optical Fiber 12G-SDI converts video signals from SDI to Fiber and also works in the other direction, Fiber to SDI. The Blackmagic Design Mini Converter Optical Fiber 12G-SDI is made in the 12G format, meaning it supports 12G or lower SDI signals.

Q: 5. Can these be ordered with ST connectors?

A: You will need to purchase ST connectors separately.

Q: 6. Does this support HD-SDI runs of 250ft?

A: Yes it does. You will be able to run a 250 foot HD-SDI cable with this system.

Q: 7. Does the AJA Kumo 1616 support 1080i50 input & output?

A: No, this does not support 1080i50. It gets close but no cigar.

Q: 8. Can someone recommend a piece of hardware to duplicate xlr audio ? I have two inputs and would like to have 8 outputs to run into these audio injectors since they don't have xlr loop through.

A: You could look at the Behringer DS2800 2-Input/8-Output Distribution Splitter for Commercial Applications, BH #BEDS2800. https://bhpho.to/31kTDhj

Q: 9. Does the optical SDI output loop the BNC SDI input?

A: Yes, Blackmagic Design Teranex Mini Optical to HDMI 12G Converter fiber connection is IN or OUT -- Optical Fiber Video Loop Through: 1 x 12G-SDI loop output.

Q: 10. Hi,We have Sony FS 7 , 4K cameras & 4 k upgraded FOR A HVS 110 switcher,We want to use this for 4 K Live production, we want your guidance on converting the 4K Hdmi output from Sony FS 7 camera to 4 K quad input of our FOR A switcher....with minimum of 70 mtr cable length,We are thinking of going for Teranex Mini - HDMI to SDI 12G - From camera end & re-converting to 4 k quad output with Teranex Mini - 12G-SDI to Quad SDI - at the switcher end , is it feasible to this with 70 - 80 mtrs of cable length with this converters, will it take this load for minimum 5 - 6 hours of production,will it gets heated up beyond the permissible limit, If it can take this load which cable you will recommend,Pl give us your technical opinion & options as we are not able to test it with our equipment, RegardsShashikant

A: We suggest using this extender to run the HDMI signal: KanexPro HDBaseT HDMI Extender B&H # KAEXTHD100HT. Then at the switcher convert the signal with this: AJA HA5-4K 4K HDMI to 4K SDI Mini-Converter B&H # AJHA54K. So that we may best assist you if you have further questions, please email us at provideo@bhphoto.com.