Designed for quick and secure mounting, the gray Twin Windbubbles from Bubblebee Industries lowers wind noise and protects the sensitive capsule of lav mics. With a 1.10" elastic opening, this Windbubble fits lav microphones with a diameter of 3 to 4mm.

The imitation fur and mesh construction not only provides a quieter wind protection than non-fur designs, it also blends well with skin, clothing, and most other surrounding materials. The elastic wire legs make mounting easy, simplifying the process of locating the Windbubble hole opening. This Windbubble is compatible with the Sanken COS-11, Countryman B3, B2D, and E6, Sennheiser MKE 1, Sony ECM-90/ECM-88, DPA 6060/6061, Shure Duraplex DL4, and Deity W.Lav Pro and W.Lav Micro.

Designed to Fit 1.10" Lav Mics    Fits Quickly and Easily    Fur and Mesh Provide Quiet Wind Guard    Fur Blends with Surrounding Material    Elastic Wire Legs Make Mounting Easy    Sanken COS-11, Countryman B3, B2D, E6    Sennheiser MKE 1, Sony ECM-90, DPA 6060

The Windbubble provides top-notch wind protection thanks to the bubble-effect in the design. The Bubblebee Windbubble consists of an outer shell of the finest imitation fur and an inner core of nothing. And this nothing is exactly what makes the bubble so special.

The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible middle-of-a-hurricane sounds, the capsule is kept in a calm space and allowed to perform at its best.

The Windbbubles are built to stay safe and secure on your lavalier microphone, with a tight fitting opening aperture. This is why several sizes are provided to find the right fit for your lav.

Bubblebee's fur and mesh construction makes the Windbubble acoustically transparent to keep the sound very close to the microphones natural frequency response. The short, dense hair of the fur gives the Windbubble a rounded and organic shape while the longer fur slows wind down gradually for quieter wind protection.

The Bubblebee fur is less shiny to blend better with skin, clothes, and other surrounding materials.

Designed in Denmark by sound lovers for sound lovers.

Related Questions and Answers

Q: 1. do i need to get a receiver separately for this or it comes with one?

A: The RODE Interview PRO Wireless Handheld Condenser Microphone is compatible for use with the RODE Series IV 2.4 GHz Receiver, which is included with the RODE Wireless GO II, RODE Wireless ME, and RODE Wireless PRO Wireless Microphone Systems. The Interview PRO Microphone is sold as an optional add-on accessory for use with any of these systems.

Q: 2. Can it be connected to rodecaster duo via wireless connection?

A: The RODE TX-M2 Handheld Wireless Microphone can only be wirelessly connected to RodeLink wireless mic receivers (Rode RX-CAM). That is how you would establish a wireless connection, and then the receiver can be physically connected to an audio interface such as the RodeCaster Duo.

Q: 3. Will this fit other lav mics, such as the Polsen OLM-10?

A: It does not fit my Sony Lav mics. The holes are too small.

Q: 4. How far from subject can mic be placed from subject before too much noise?

A: Hello Kevin, the TX-M2 transmitter operates up to 100 meters/328 feet. Note that this is under perfect conditions and best practices include good line of sight, limiting WIFI interference, and keeping a well charged battery.

Q: 5. Will this fit the Rode lavalier go ?

A: Yes, the RODE synthetic mini fur is designed and made for the following unit. RODE LAV RODE LAVALIER-II RODE Link lav RODE RODELink Filmmaker RODE SC6-L RODE Wireless GO II RODE Wireless Go II RODE smartLav RODE smartLav+ Zoom H1 Zoom H1n

Q: 6. Will this mic link with the Rode Wireless Go receiver?

A: Hello Larry. No, the RodeLink systems only work inside the RodeLink product line. The Wireless Go system only works as its own set currently. The TX-M2 will work perfectly with the Rode RX-Cam however.

Q: 7. Can this be plugged into/powered by iPhone?

A: Yes with this Apple Lightning to usb camera adapter it should work. https://www.bhphotovideo.com/c/product/1241761-REG/apple_mk0w2am_a_lightning_to_usb_3_0.html?sts=pi&pim=Y

Q: 8. Will these fit my Sony ECM 55?

A: No

Q: 9. Will these fit the Tascam DR 10L?

A: Yes, the Tentacle Sync Windjammers for Tentacle Lavalier Microphone (3-Pack) will fit on the TASCAM TR-10L Lavalier Microphone for the DR-10L Portable Audio Recorder.

Q: 10. Does this fit with the Tascam DR-10L lav mic?

A: Yes it does! I just got mine in the mail and it fits just fine =)