The Tiffen 3 x 4" 5 Pink Soft-Edge Graduated Filter helps to specifically add a bright pink coloration to skies and other bright areas of an image while allowing a portion of the image to remain neutrally colored. The filter's coloring is densest at the edge and tapers to clear by the middle, with a soft-edged transition between the density and clear areas. The 5 color density provides more pink coloration than the 4 density filter.

This filter is made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass and grinding flat to a tolerance of 1/10,000th of an inch. It measures 3 x 4" / 76.2 x 101.6mm.

Note: A vertical orientation filter's line of transition runs parallel to the short side of the filter.

Provides a bright pink coloring to select areas of the image.

Graduated filter design keeps a portion of the image neutral, resulting in a more realistic look while allowing for the sky or other bright areas to take on the color of the density.

Related Questions and Answers

Q: 1. Can there filters be used in a Lee 100 filter holder?

A: Yes they can.

Q: 2. Since the filter is 100 x 150mm This can still slide into a 100mm holder am I correct?

A: Yes you are correct

Q: 3. I have the 100 -400 canon lens. what exactly do I need to use this setup? Please be specific. Thank you

A: Hi Patricia,As far as I could research, there are two Canon lenses that fit your description. One has image stabilization (IS) while the other does not. The Canon EF 100mm f/2.8 Macro USM has a filter diameter of 58mm and would require this: https://a href= http://www.bhphotovideo.com/c/product/14092-REG/Cokin_CP458_P_Series_58mm_Adapter.html target= _blank www.bhphotovideo.com/c/product/14092-REG/Cokin_CP458_P_Series_58mm_Adapter.html/aThe Canon EF 100mm f/2.8L Macro IS USM has a filter diameter of 67mm and would require this: https://a href= http://www.bhphotovideo.com/c/product/14094-REG/Cokin_CP467_P_Series_67mm_Adapter.html target= _blank www.bhphotovideo.com/c/product/14094-REG/Cokin_CP467_P_Series_67mm_Adapter.html/aIf neither of these match the lens you own, then the item you are looking for is a Cokin P Series Filter Holder Adapter Ring in the appropriate size. The kit already includes the filter holder, which simply slides onto the adapter ring. These are nice filters, I've enjoyed them very much so far. Best of luck!

Q: 4. Where is the origin? What is thick?

A: According to the information we have, our current inventory's Country of Origin is UK. Please be aware this can change over the product's production life without notice. LEE Filters are typically 2mm thick.

Q: 5. Will this fit into the lee100 holder?

A: This filter is 2mm thick and the Lee system is also 2mm, so any filter that is 100mm wide and 2mm thick will work.

Q: 6. does this kit include a medium graduated neutral density filter?

A: Yes

Q: 7. Does it work with a Nikon 14-24? What adaptor will I need for the 24-70?

A: Unfortunately, there is no adapter for the Nikon AF-S 14-24mm lens to allow Cokin P Series filters to work with it. For the Nikon AF-S 24-70mm f/2.8E ED VR Lens, the Cokin P Series Filter Holder Adapter Ring (82mm), BH # COCH3HO25 https://bhpho.to/2BzGELC

Q: 8. Hello. I use a tamron 24-70mm and sigma 50mm. What will i need to make this work on those lenses? Anything special that isnt included in the kit or maybe a differemt kit altogether?

A: You will need the ring that the holder sits on. The Beauty is that the holder fits any lens with the proper ring. Depending on the mm o your lens you will need a ring. You can purchase step up rings fairly inexpensive on the web.

Q: 9. is this filter a good size for a 77mm lens or I would be better off with a 100mm size filter ?

A: It depends if youre shooting wide or not. Im thinking you probably are so I wouldnt recommend it. Anything roughly under about 25mm brings the holder into the frame. So basically it was a waste of money for my 17-35 nikkor lens with 77mm thread. Id go for a bigger filter kit if shooting anything wide, 24mm or wider. Hope that helps.

Q: 10. i have a canon len 11-24 f4. Can this LEE Filters 150 x 170mm 0.9 Soft-Edge Graduated Neutral Density Filter fit to SW150mm mkII System? And what your recommendation on little and big brother ND filter?

A: Yes that filter fits the SW150, and the SW150 system fits that lens - but you need the right adaptor - Lee make specific adaptors for different lenses. The Big Stopper is fantastic for doing really long time exposures.