Find your target in the dark, aim with your own customized reticles, and record the moments before, during, and after your shot with the ThOR 5 XD 4-40x Thermal Riflescope from ATN. Along with a ballistic calculator , the ThOR 5 features a customizable mil dot reticle and a reticle editor you can use to design your own crosshairs. Recoil-activated video captures the action 10 seconds before and 5 seconds after the shot. Dual-stream video capability allows you to stream over Wi-Fi while simultaneously recording on a microSD card. Imagery on the OLED display is shown in your choice of black hot, white hot, and color.

The weather-resistant scope looks and feels much like an optical riflescope, and mounts on your rifle's Picatinny rail with your choice of a pair of mounting rings or a one-piece, two-ring, quick detach mount, both included. Control buttons on the top are easy and intuitive, and eye relief is a comfortable 90mm.

1280 x 1024 Thermal Sensor    1024 x 768 OLED Display    Ballistic Calculator    Mil Dot Reticle, or Make Your Own    Recoil Activated 60 fps Video    Stream & Record Video at Same Time    Aluminum Housing/30mm Maintube

• 1280 x 1024 ATN generation XD thermal core
• 60 Hz refresh rate

• 4-40x magnification
• 90mm eye relief

• Wi-Fi and Bluetooth connectivity
• microSD memory slot with a 4-64GB capacity
• USB Type-C port for charging and PC connection
• E-compass, 3D gyroscope, e-barometer, 3D accelerometer, microphone

• 1280 x 720 display
• 1280 x 720 at 60 fps recording resolution
• Recoil activated recording captures 10 seconds before shot and 5 seconds after
• Black hot, white hot, and color modes
• Dual Stream allows simultaneous streaming and recording

• Intuitive user interface, compact control pad on the top
• In-view sensor readouts and status indicators
• Ballistic Calculator makes corrections for your firearm, caliber, ammunition, range, wind, and aiming angle
• One Shot Zero allows an easy way to zero the scope
• Aluminum alloy construction
• 30mm maintube diameter
• Impact-resistant electronics

Related Questions and Answers

Q: 1. Does this camera have any visible lights? Need to use this as a security camera and any glow will defeat its purpose.

A: Good morning, The Strike Force Pro XD (Model# BTC-5PXD) has an standard infrared flash that does have a visible low red glow at the bulbs when the flash is triggered. If you are looking for an invisible flash for security purposes I would advise the Dark Ops Pro XD (Model# BTC-6PXD). BTC Customer Service

Q: 2. What is the average file size for one minutes of video?

A: The best estimate is about 3.6 minutes of video per GB.

Q: 3. how do I attach my camera to this tripod?

A: You must first remove the head on your current tripod. Replace by screwing on your SIRUI head. Screw the ACRA SWISS plate to the bottom of your camera and place the combination on the head.

Q: 4. Can the photos and videos be downloaded via wifi or bluetooth?

A: Sorry, no wireless remote control. The IR sensors in the camera automatically detects motion and activates the camera day or night.

Q: 5. hi, would this work well for macro work on manfrotto legs? - thanks

A: Yes, I use this ball head on a Manfrotto tripod with the center column that can be used as an arm. With the center column at 90 degrees to the tripod, I would not extend the camera to far from the center of the tripod as it can cause the tripod to tip over.

Q: 6. Is it made in China?

A: Yes

Q: 7. will this head hold my canon 600mm mk2 with 1.4x convertor and 1DXMK2 rig without creep?

A: It probably will, as long as it is not too cold, the wind is not too high, and your subject is not too vertical. I have a D500 with a 200-500 (no TC), and the head is usually very solid. It crept a bit during the lunar eclipse last month, but it was 2 degrees, with a 25 mile an hour wind and the moon was almost straight up. I still got several great images.

Q: 8. Can this hold memory SD cards?

A: No

Q: 9. Is the KX-40x compatible with Kirk Arca style mounting plates?

A: Yes, it does. The standard is Arca, so it doesn't matter if the manufacturer is Kirk, RRS, etc. If the mounting plates are Arca compatible, it will work with the KX-40x ball head.

Q: 10. According to the info of In the Box , the quick release plate is included. But when I tried to check out, it prompted me to order the essential accessory of the quick release plate. Is the plate included or do I have to place the extra order? Also, does it fit the Oben tripod? Thank you.

A: The K-40x does come with a quick release plate, you do not need to purchase one separately unless you want a second plate. You can use the K-40x on a set of Oben legs, yes.