The IK Multimedia T-Racks Single - Bus Compressor (Download) is a software emulation of a modern large format analog console channel strip. It is designed to model the high bandwidth and low signal to noise ratio circuit of contemporary analog equipment with the facilities of a classic British style console.

The EQ section of the channel strip features dual-mode operation with switchable Black and Brown circuit designs. The low shelf filter knob will change color depending upon which circuit design is selected. The low shelf filter features a selectable frequency knob between 40 and 600 Hz, a gain level between -15 to +15 dB, and a peak button. The LOW MID and HI MID EQ sections feature gain control knobs from -15 to +15 dB, knobs for adjusting the Q, and frequency control knobs for 0.2 to 2.0 kHz for the LOW MID and between 0.6 and 7 kHz for the HI MID. The HI EQ section features a peak button, a gain control knob from -15 to +15 dB, and a frequency control knob from 1.5 to 22 kHz.

The side chain high pass filter section features a filter in button, a filter side chain button and selectable knob from out to 400 Hz, and a filter in button with a selectable knob from 3 kHz to out.

The Gate/Expander section features adjustable threshold from -30 to +10 dB, a hold knob from 0 to 4, a release time from 0.1 to 4 seconds, and a range knob from 0 to 40, as well as buttons for engaging EQ S/C, EQ PRE, EXP, and Fast Attack. The compressor section features a button for fast attack and hard compression, as well as knobs for adjusting the release from 0.1 to 4 seconds, the threshold from +10 to -20 dB and a ratio from 1 to ∞. The final section features an adjustable input gain from -15 to +15 dB, an adjustable output gain from -15 to +15 dB, a six section stereo LED meter, and a button for turning the channel strip on and off. The EQ and Gate/Expander-Compressor sections can be operated in either order by using the "IN" and "B" buttons to achieve a wide range of dynamic processing, such as EQing the signal before compression, or compressing the signal and then EQing the result. The gate section is useful for keeping the dynamics of a track within range, for taming excessive peaks, or removing background noises below the defined threshold.

A virtual VU meter provides visual feedback over the processing and a compression IN button allows you to observe the effect of the process on the signal. The left and right sides can be linked for stereo compression. A mid side button enables mid-side compression wherein the mid channel is the mono sum of the sound stage and the side channel is the difference between the left and right channels. A reset switch can be used to restore the original settings.

The plug-in is fully compatible with native 32- and 64-bit applications on both Mac OS X (Universal Binary) and Windows (XP/Vista/7/8) computers. It supports VST, RTAS, AAX, and Audio Units plug-in formats. It can also be used with the T-RackS CS standalone application (sold separately).

Based on Modern Console Strip    Side Chain High Pass Filter    Change Order of EQ and Dynamics    Adjustable Ratio, Attack, and Release    Mid Side Compression    Supports 192 kHz Sample Rates    Full-Latency Compensation Support    32- and 64-bit Native Compatibility    Reset Switch    Mac and Windows Compatibility

Related Questions and Answers

Q: 1. Hi my self from indian how can I buy this product

A: We can ship this item over seas to India. You can place an order either online through our site, or call our sales team at 800-606-6969 to place an order over the phone.

Q: 2. These samples can be played in real time and triggered by a electronic drum set?

A: Yes, using SampleTank you can trigger your sounds via an electric drum set.

Q: 3. Will this microphone work with an iPhone 7 using the lightning to headphone adapter? If yes then can you monitor the audio using the native splitter headphone port on the iRig?

A: Yes, the iRig Mic will work with the iPhone 7 using the included Apple 3.5mm (TRRS) to Lightning adapter. Once connected to iOS, the iRig Mic's headphone port will be used for monitoring purposes.

Q: 4. How long is the second speaker cable?

A: The 4-pin DIN speaker connection cable included with the IK Multimedia iLoud Micro Monitors is 4.9' I1.5m) long.

Q: 5. Will this work with an iMac?

A: It will work with many Macs, but not all. If you have a pair of earbuds with a built-in microphone, you can use these to test if your Mac will work, as these use the same wiring scheme as iRig Mic.

Q: 6. How long it the cord?

A: The IK Multimedia iRig Mic has a permanently attached 2m/6.5 ft. cable.

Q: 7. When not being used as studio monitors, is it OK to use these speakers as computer speakers hooked up to the headphone out of an iMac with a 3.5mm stereo to a Y XLR to the speakers?

A: Yes, this will work perfectly fine.

Q: 8. Would these be large enough to use in a gymnasium along with other speakers?

A: These are not PA speakers and not intended to be used in a live situation. They are studio monitors and are designed to be used in a production studio.

Q: 9. Is this compatible with Protools 10?

A: The IK Multimedia T-RackS 5 Dyna-Mu Compressor Software will run in digital audio workstations that support 64-bit AAX, AU, VST2, VST3 plugins. Natively, Pro Tools 10 supports only 32-bit plugins so T-TrackS 5 is not compatible with Pro Tools 10 but is compatible with Pro Tools 11.

Q: 10. How long is the inter-monitor cable ? … and how far apart should both monitors be ideally ?

A: The inter-monitor cable is 4.9' (1.5m) long. The speakers should be placed no less than 8" away from each other and at least 8" away from any walls, each angled at approximately 60 degrees pointed toward the listener in a triangular position. Here is a link to the user manual -- see page 16 for the setup diagram: http://www.bhphotovideo.com/lit_files/650699.pdf