Add a versatile NDI|HX PTZ camera to your meeting room, house of worship, or studio with this black OTTICA NDI|HX PTZ Camera with 30x Optical Zoom from ikan. Boasting a 1/2.8" CMOS sensor, the OTTICA is fully licensed for NewTek's NDI|HX communication, which enables the utilization of NDI protocols with less bandwidth than NDI.

A 4.3 to 129mm lens provides a 30x optical zoom with a viewing angle ranging from 2.34 to 65.1°. With a color temperature range from 2400 to 7100K, the OTTICA captures vibrant, razor-sharp images that are supported by its 2D/3D noise-reduction capability. Video output occurs via HDMI, SDI, and RJ45 NDI connectivity, employing resolutions up to 1080p60. A 3.5mm audio input makes it possible for you to embed analog audio with the video outputs, and you can power the camera using the included power adapter or via PoE (Power over Ethernet) over the RJ45 port.

Employing a virtually silent motor during pan, tilt, and zoom operation, the OTTICA supports RS-232 and RS-485 serial connectivity, which when used with a separately available controller, allows you to store up to 255 presets or up to 10 presets when using the included IR remote control. Also in the box, are a cascade cable for daisy-chaining RS-232 serial control, an RS-232 cable, an RS-485 connector, a power adapter, and a wall-mount bracket.

2 x OTTICA NDI|HX 1080p PTZ Cameras    OTTICA V2 IP PTZ Camera Controller    30x Optical Zoom, HDMI/SDI Output    Fully Licensed NDI|HX    IP, VISCA, and Pelco-D/P Control

1/2.8" CMOS sensor captures up to 1080p60 video

HDMI, SDI, RJ45 Ethernet (NDI) video outputs

Fully licensed NDI|HX support

PoE (Power-over-Ethernet) support

Silent PTZ motor mechanism

4.3 to 129mm varifocal lens with 30x zoom and a 2.34 to 65.1° field of view

2D/3D noise reduction

Control PTZ using included IR remote control and PELCO-D, PELCO-P, and VISCA serial protocols

Powers with power adapter or via PoE

One 1/4"-20 mounting thread, wall mount bracket included

Cascade connector included to support serial control of multiple cameras from one controller

Related Questions and Answers

Q: 1. Does this camera have presets?

A: Presets are something that will be available on the remote controller you are using with this camera. The IR Remote Commander offers a few preset spots, while Sony RM-IP500/1 will offer a lot more preset options. https://bhpho.to/3kYQpI3

Q: 2. Will this work correctly to control the AViPAS cameras over IP? Model AViPAS AV-3104IP

A: The short answer: Yes it can but we only recommend using this controller with PTZ Optics Cameras. While it is possible to use this controller with other NDI and IP cameras we cant guarantee full functionality (such as adjusting white balance color shading etc). Most of our customers that try to cross brands on IP based solutions (even in an instance like this where they both support VISCA over IP protocols) have experienced problems. For experienced IP professionals there are ways around the limitations to make this work with most IP based PTZ cameras. For people who are just starting out (or want a set up with low maintenance) we recommend matching PTZ cameras with controllers designed by the same manufacturer.

Q: 3. Can this control the Canon CR-N300?

A: Both products are listed as having VISCA compatibility, however, the Canon camera is listed explicitly as having compatibility with the Canon branded RC-IP100.

Q: 4. Does this unit have a smoother Joystick with pan and tilt? The older units from PtzOptics are very "clunky"

A: Yes. The following unit offers a clean and smooth Full pan/tilt/zoom PTZ camera control with speed adjustments on the fly.

Q: 5. How many preset memory positions can be saved?

A: The following unit offers 9x Quick, 4 Super, 255 Total Presets.

Q: 6. Can you daisy chain two of these controllers through a network hub?

A: You could connect a pair of these to a network hub. We are not aware of it being daisy-chained though.

Q: 7. Is is possible to record directly to storage on this camera or through a web browser interface to a computer?

A: You could record the cameras RTSP output with applications like OBS. Also Sony SRG-X120 could be upgraded with an NDI license and that would be an easy way to record using NDI Studio Monitor Software.

Q: 8. This camera have a built in microphone audio?

A: works well who is this?

Q: 9. Can this unit control Lumens Cameras vc-a61p ? which features are lost and which kept ?

A: We always recommend that people use Controllers designed by the same manufacturer as the camera they intend to use to simplify set up and reduce troubleshooting issues. That being said This controller uses all the same protocols as the Lumens Cameras VC-A61p therefore it should have control over all the features of the camera.

Q: 10. Is this compatible with Sony SRG-X120 1080p PTZ Camera with HDMI, IP & 3G-SDI Output?

A: Yes it would be.