Amazon Echo Switch Inputs Stereo Receiver

Pyle Pro Pda63bt 2-channel Receiver With Bluetooth

Product Code: ga150764
Availability: In Stock

$194.97 $288.56

Qty

0 reviews Write a review

Description
Reviews (0)

Enjoy stereo sound with the compact PDA63BT 2-Channel Receiver with Bluetooth. Connect a pair of speakers and play music from the built-in FM tuner or stream audio wirelessly with a compatible Bluetooth device. Stereo RCA and 3.5mm inputs are available to connect external devices, like CD and MP3 players. There is also a USB-A and SD card reader to play your stored music. The PDA63BT also has two 1/4" microphone inputs with adjustable echo effect for karaoke nights.

2-Channel Configuration Bluetooth Wireless Input USB-A & SD Card Inputs FM Radio Tuner 2 x 1/4" Microphone Inputs 1 x 3.5mm & 2 x Stereo RCA Inputs Echo, Bass, and Treble Control Remote Control Included

Key Specs
Channels	2.0
Power Output per Channel	2-Channel Driven: 20 W at 8 Ohms (RMS)
Rear A/V Inputs	2x Stereo RCA Line
Front I/O	2x 1/4" / 6.35 mm Microphone Input 1x 1/8" / 3.5 mm Aux Input 1x USB-A Input
Wi-Fi	No
Bluetooth	Yes
Amplifier
Channels	2.0
Power Output per Channel	2-Channel Driven: 20 W at 8 Ohms (RMS)
Frequency Response	20 Hz to 20 kHz
Tone Control	Bass (100 Hz): ±12.0 dB Treble (10 kHz): ±12.0 dB
Audio Processing
Supported File Formats	MP3 via USB/SD Card
Connectivity
Rear A/V Inputs	2x Stereo RCA Line
Rear A/V Outputs	1x Stereo RCA Line-Out
Front I/O	2x 1/4" / 6.35 mm Microphone Input 1x 1/8" / 3.5 mm Aux Input 1x USB-A Input
Other Rear I/O	1x FM Coaxial F-Type Input
Speaker I/O	2x Binding Post Pairs
Media Card Slot	Unspecified SD
A/B Speaker Selection	No
Bi-Amp Capability	No
Signal to Noise Ratio	> 71 dB
Total Harmonic Distortion (THD)	< 1%
Wireless Connectivity
Wi-Fi	No
Bluetooth	Yes
Wireless Range	40' / 12.2 m (Bluetooth)
Control
External Control Support	No
Mobile App Compatible	No
Tuner Section
Tuner Type	FM
Number of Tuner Presets	FM: 60 Stations
Radio Frequencies	FM: 87.5 to 108 MHz
Power
Input Power	115 to 230 VAC, 50 / 60 Hz
Physical
Dimensions (W x H x D)	9.8 x 3.9 x 9.8" / 248.9 x 99.1 x 248.9 mm
Packaging Info
Package Weight	6.23 lb
Box Dimensions (LxWxH)	12.7 x 11.5 x 4.8"

Related Questions and Answers

Q: 1. How much clearance will this need for proper ventilation/cooling? The project I'm working on probably won't afford much space.

A: Pyle Pro does not specify clearance for installation, other than *Use the amplifier only in well-ventilated installations. You would want to allow some airflow to keep the component from over heating. An inch on all sides should be sufficient, but use your own judgement according to your particular setup.

Q: 2. Is the 750 Watts = to 125 Watts per speaker channel?

A: This is a 6 zone/12 channel amplifier. Max power is 750 watts divided by 12, so 62.5 watts per channel. I would like to note this is maximum power and it is not recommended to run any amplifier at continuous full power. I would recommend this product for use with speakers that require 40 watts RMS per speaker or less.

Q: 3. Can the Bluetooth on this receiver connect to my Pyle soundbar, PSBV200BT ? and if it can how ?

A: No, the Pyle Pro PT272AUBT Stereo Receiver with Bluetooth (B&H # PYPT272AUBT) does not have a Bluetooth transmitter and cannot connect to the Pyle PSBV200BT Soundbar.

Q: 4. is the Remote for this device Infrared ?

A: The Pyle Pro PTA62BT 6-Zone Stereo Receiver with Bluetooth BH #PYPTA62BT does have an infrared remote.

Q: 5. What is the range of FM station channels like 88 Mhz to 108 Mhz?

A: Yes, FM station channels range from 88 Mhz to 108 Mhz

Q: 6. Is there a wayvto programbthe radio stations u want to the channel numbers...when u press the CH+ button the presets are all static???

A: This receiver has the ability to set 30 station presets.

Q: 7. what is the power out put per channel ?

A: Pyle Pro PT6000CH Specs Amplifier Channels 6.0 Power Output per Channel 350 W at 8 Ohms 700 W at 4 Ohms

Q: 8. For most Pro Amps, they publish both the watts/Channel AND the Total Harmonic Distortion. But there is no mention of THD % anywhere on this ad. Does anyone know the THD at 100w?

A: This has a T.H.D.: of 0.1% according to Pyle Pro.

Q: 9. Can I connect my speaker to this using Bluetooth?

A: The Pyle Pro PDA6BU Stereo Receiver with Bluetooth BH #PYPDA6BU features a bluetooth receiver only. It cannot transmit a signal via Bluetooth to your speakers.

Q: 10. would this stereo receiver work well paired with a set of CR5-XBT stereo monitors?

A: Yes you can use a stereo pair of RCA cables (BH #KOSRC4006) to connect the Pyle PDA6BU to the Mackie CR5-XBT monitors.

There are no reviews for this product.