Get better reception from your UHF wireless microphone system with the black RF Venue Diversity Architectural Antenna. This high-performance diversity flood antenna features a slim enclosure designed to be discreetly mounted on a wall or ceiling in your classroom, meeting space, training center, or house of worship. Based on the highly acclaimed Diversity Fin Antenna, the Architectural Antenna's unique shape helps eliminate the most common signal dropouts caused by changes in the angle and orientation of the RF signal.

The back plate comes with pre-drilled holes that provide multiple mounting options; you then simply attach the front plate using the included mounting screws. Rear-mounted BNC female connectors allow you to connect the antenna to your in-wall or in-ceiling cable run feeding your wireless receiver. The system uses a dual-feed antenna design with both A and B diversity connections provided, eliminating the need for two separate antennas and giving you improved wireless performance with less dropouts in a sleek, low-profile enclosure that complements any decor.

Improves Wireless Mic System Performance    Black Diversity Architectural Antenna    DISTRO5 HDR 5-Way Antenna Splitter    Distributes Power to 8 Receivers    Includes Two 25' Coaxial Antenna Cables    Includes Ten 1.5' Coaxial Cables    Includes DC Octopus Cable    Reduces IMD and Crosstalk    Compatible with All Manufacturers

• Improves wireless UHF reception and reduces dropouts for clearer audio
• Wide UHF bandwidth (470 to 616 MHz)
• Two antennas in one space-saving package
• Blends into any background
• Easy, cost-effective installation
• Ceiling and wall mounting kits included

Related Questions and Answers

Q: 1. Is the rate given for 1 antenna or a pair?

A: The antenna is a single unit, not a pair.

Q: 2. How do you change to high power mode? The option should be between pt and sq and it's not there

A: The Midland MXT115 “Menu” Mode Quick Reference Chart can be found on page 18 in the manual linked here: https://files.bbystatic.com/qdiFGyGKsdiXkkryejvQGg%3D%3D/01bdaec9-d938-4a04-9c49-1d6383686f40.pdf

Q: 3. Does this work for the XSW-2 receiver? I am confused by EM-XSW-2, is it the same receiver?

A: XSW-2 is the wireless system model. EM-XSW 2 is the model of the receiver in the system. If you have a XSW-2 system, then this antenna should work with that receiver.

Q: 4. Is this compatible with EW300 receiver?

A: Yes, that's what I use it on.

Q: 5. Is this 1/4 wave?

A: The Sennheiser 576131 is a 1/4 wave antenna.

Q: 6. Do you know if this is compatible with the EW100 G2 receiver as well?

A: As long as you have the desk top receiver it should work. You are well within the frequency spectrum for this antenna. Just make sure you have BNC connectors on the back of the receiver.

Q: 7. Does this work with lectrosonics, sennheisers and zaxcom receivers and transmitters?And how exactly is it used?

A: The PSC UHF Log Periodic Antenna will provide the users of UHF wireless microphones a simple and elegant passive antenna solution for field use. This passive antenna from PSC provides coverage from 450MHz to 900MHz. This antenna offers a typical gain of 4.5dB over that of a dipole antenna, thus providing added range to your radio microphones in the field. The antenna features a robust design using a heavy duty 0.125 (3.175mm) fiberglass substrate. The PSC UHF Log Periodic Antenna is produced as a skeletal design. This design allows for lower wind loading in the field. The entire antenna is coated in a water resistant textured coating for years of trouble free operation in the field. In addition, we have equipped this antenna with the most robust Molex brand BNC connecter we could source. Mounting is accomplished via an industry standard 3/8 -16. ------------------------------------------------------------------------------Antenna Placement:Your PSC UHF Log Periodic Antenna should be mounted up and away from all of your other sound equipment. The antenna should be pointed toward the actor worn transmitters. Typically we advise that you place the antenna up at least 6 to 10 feet (2-3 meters) above your sound cart for best performance. The antenna can be mounted using an industry standard 3/8-16TPI threaded base.

Q: 8. Hi, is this compatible with EW 100 G4 series?

A: Yes, the Sennheiser 576131 Antenna for EW G3/G4 and EM-XSW 2 Receivers (470 to 862 MHz) is compatible for use with the Sennheiser EW 100 G4 Wireless Microphone System.

Q: 9. Do i need 2 of these for true diversity?

A: Yes

Q: 10. Sennheiser g3 g4 setleri icin uygun mudur?

A: Yes, the AKG APS4 UHF Antenna and Power Splitter can be used with Sennheiser G3 and G4 series wireless microphone receivers. It can feed up to four wireless receivers with the RF signal coming from one pair of antennas and also supplies power to all connected receivers via BNC cables.