The Lectrosonics SRDB25AES Superslot/Unislot Digital Output Adapter mounts onto any Digital Hybrid Wireless SR Series 2-channel slot receiver and converts the analog audio outputs from the receiver to AES3 digital at 48 kHz. This adapter is especially useful when pairing an older unit like an SRc in a slot dock with a new receiver like a DSR4, thus allowing all channels from both receivers to enter through the slot in digital format.

The SRDB25AES is taller than most other SR-Series bottom plates. It adds a little over a 1/4" to the receiver case length. When installed on a unit, the resulting height is identical to a DSR4 mounted with a DSR4DB25 bottom plate. In other words, when a DSR4 is slotted next to an SRC with one of these adapters on it, both receivers will be the same height while in the dock. The adapter is retained by two screws through the side panel of the housing, making it easy to install.

AES Audio into Superslot/Unislot    For SR Series Slot Receivers    Converts Analog to AES3 at 48 kHz    DB25 Connector for Power and Audio    Easy to Install

• SRb and older SR receivers can be used with this adapter for audio and power, while no data connection is present so all receiver settings need to be made via the receiver front panels.
• The SRc has a data connection and all previous functions are retained in terms of receiver control through the slot interface. SRb receivers with the FM01 update (an updated audio board) also have this data connection.

• Add an SR Series receiver to your SL-2 setup: the SRDB25AES enables you to deliver AES digital audio into a Sound Devices SL-2 dock that is integrated with a mixer/recorder.
• The unit will convert at 48 kHz and allow for re-sampling in the mixer/recorder if needed.
• Note: Sound Devices 8-Series firmware must be v9.50 or higher for this adapter to work properly in an SL-2. The Sound Devices SL-6 will not recognize this adapter.

• The DB25 connector, with SuperSlot-compliant pin configuration converts from analog to AES3 at 48 kHz from receivers with only analog outputs (SRb, SRc).
• The control lines for UART connections on pins 22 and 23 for modified SRb and all SRc receivers allows for data connection for docks and cameras with this feature.

The SRDB25AES adapter is compatible with:

• Octopack, Quadpack, Duopack
• Cameras with Unislot connection
• SuperSlot

Related Questions and Answers

Q: 1. Whats included in the box?

A: In the box is the receiver, a wall mounted power supply, and 2 antennas. The bottom plate, which is selected according to the way it will be used, must be ordered separately. For example, for a Panasonic camera you need to order an SRSUPER plate. Please see the Lectrosonics website for a list of available bottom plates.

Q: 2. What cable do I need to connect this in conjunction with the Sound Devices MM-1?

A: The Lectrosonics SPDR is not compatible with a Sound Devices MM-1.

Q: 3. Can this be used with Hollyland Lark Max transmitter?

A: Yes, the Saramonic SR-MH1 Handheld Transmitter Adapter can be used with a Hollyland Lark Max transmitter.

Q: 4. Can you tell me.... is the FotodioX for Canon EF and ES-S Lens to Leica M-Series camera compatible with a Canon TS-E 24mm f/3.5L II Tilt-Shift Lens?Tks.jp

A: Yes, the FotodioX for Canon EF and EF-S Lens to Leica M-Series Camera will work with a Canon TS-E 24mm f/3.5L lens.

Q: 5. Does the output work as it is recording?

A: Yes, the Lectrosonics SPDR Stereo Portable Digital Recorder has an analog 3.5mm TRS line level output which does work while recording.

Q: 6. Does the the FotodioX for Canon EF and ES-S Lens to Leica M-Series camera also work with M mount film cameras and does it affect focusing on a rangefinder? Many thanks

A: The FotodioX Canon EF and EF-S Lens to Leica M-Series adapter will work with any M-mount camera; film M-mount cameras included. Keep in mind that EF-S lenses will vignette on 35mm film cameras. The adapter will allow you to retain focus at infinity, so shouldnt affect focus.

Q: 7. Can this be used with Techart's LM-EA7?

A: Unfortunately no, adapters cannot be combined.

Q: 8. Does it provide phantom power?

A: No, the Lectrosonics SPDR does not provide phantom power, although it provides 2-4V plugin power for lavalier microphones.

Q: 9. will this work with sirui w2204? thanks

A: No, Sirui SR-66C Center Column for SR Series Tripods BH #SISUSR66C is compatible with only the SR-3004, SR-3204, and SR-3203 tripods and it will not work with the Sirui W2204.

Q: 10. Is this compatible with older Lectro transmitters (e.g. UM400a)?

A: Yes, the Lectrosonics SRc Dual-Channel Slot-Mount ENG Receiver can be used with older Lectrosonics transmitters that operate on the same frequency band. The receiver has different compatibility mode settings for use with transmitters other than those from the Lectrosonics Digital Hybrid Wireless series.