The TOA Electronic's F-2322CU2 5" Coaxial Ceiling Speaker with tile bridge has a frequency response of 70 Hz to 20 kHz and can handle 30W. It is a powerful ported bass-reflex designed speaker with wide-dispersion for music and paging applications. The acoustic construction of this speaker allows for a wide area of coverage with uniform sound output levels.

The speaker has a coaxial 5" cone driver with a dome tweeter, a practical low-profile design, and a paintable grille that will fit in with most any decor. It features a built-in multi-tap transformer with an additional 8/16 ohms direct mode, front baffle power tap selection and a double locking, paintable grille. The speaker comes packaged with a tile bridge and is designed to be fast and easy to install.

The speaker is UL1480/2043-Listed for Fire Protective, General Purpose Signaling and Air-Handling Spaces, and features Toa's limited 5-year warranty.

Passive 5" Ceiling Speaker    70 Hz to 20 kHz Frequency Response    Handles up to 30 W    Built-In Multi-Tap Transformer    Paintable Grille    Front Baffle Power Tap    Includes Tile Bridge

Suitable for places where improved sound quality is needed over a wide area, this speaker can be used at airports, offices, restaurants, museums, schools, theaters, retail stores, and more

This speaker is UL compliant and is listed for Fire Protective, General Purpose Signaling and Air-Handling Spaces

This speaker has both low- and high-impedance operating capabilities making it suitable for many different applications. Even after installation, the front-panel input selector switch makes it easy to change impedance settings

Also includes built-in multi-tap transformers with front baffle power tap selection

Related Questions and Answers

Q: 1. what type of cable is needed to connect speakers to a system?

A: I would recommend a roll of Pro Co Sound - Excellines Type 16-2 Bulk Speaker CablePro Co Sound. 16 AWG is a very popular gauge for install systems.

Q: 2. I can only hear the hi and. Not the mid im probably connecting them wrong anyone can help me?

A: The HX-5W is a full range speaker array that features 5 woofers. It is best to use this array with a subwoofer for a fuller sound and to minimize the impact low end frequencies can have on the relatively small 5 woofers. Another possibility is that the woofers are blown out, causing you to hear only mid and high frequencies. It would be advisable to contact TOA Product support at 800-733-4748 (option 2) for warranty claims.

Q: 3. Are they powered or passive?

A: Passive

Q: 4. Can these be used in stereo or bridged to mono or would I need two sets?

A: The Toa Electronics HX-5B Variable Dispersion Line Array Speaker use a single SpeakON or M4 terminal input connection and will not produce a stereo signal with a single unit. A pair of HX-5B, one receiving the left channel and the other receiving the right channel, would be required for a true stereo image.

Q: 5. do these come as a pair or is the price per individual speaker?

A: The price is per individual speaker.

Q: 6. Toa amplifier used with this speaker?

A: The Toa BG-2120 Mixer Amplifier is designed to operate as the front end to any commercial audio system in background music (BGM), foreground music, paging applications and more. The BG-2120 features 5-channels and a power rating of 120 watts, with 2-zone operation allowing for separate programming in 2 discrete zones. The front panel features an intuitive set of controls with level dials for each channel. The rear is fitted with removable euroblock connectors and DIP switches for easy programming. The rugged chassis is easily rack mounted with the optional MB-1000 rack mount brackets.

Q: 7. is the $529 the price for the entire 4 array or each speaker? what is the SPL of each speaker and the entire rig?

A: The HX-5B is sold as shown. The array features 4 angle adjustable units. SPL rating is not provided by the Manufacturer. All available specs provided in the documentation: https://a href= http://static.bhphotovideo.com/lit_files/257736.pdf target= _blank static.bhphotovideo.com/lit_files/257736.pdf/a

Q: 8. Can one Crown XLi 3500 amplifier carry a pair of toa hx-5w? i.e 8 enclosures

A: Good combination. The amp will have plenty of headroom to safely drive the TOA arrays.

Q: 9. 328c need backbox?

A: No you do not. But you might want to get the front grill. JBL MTC-RG6/8.

Q: 10. What would be a good amp to pair with a pair of these speakers?

A: It depend how it is used, if you are using these speakers for speeches, and normal music you can use the DA-250D this gives you 250 watts per speaker. If you are using it in a loud music environment you can use the DA-250F in a bridge mode, that will give you 500 Watts per speakers.Another configuration with Subs, two of them, you can use the FB-120, and add another DA-250D for the subs.