The MVIO XC-2AES 2 Digital Audio Embedded HD-SD Cross Converter from Gra-Vue upconverts or down converts one SD/HD-SDI signal to output two HD/SD-SDI signals and a loop-through SD/HD-SDI signal. The module features an HD/SD self-adaptive input and can embed 2 digital audio channels into the outputs. This module can amplify and de-noise output signals and supports AFD (Active Format Description).

The video connectors are BNC while the audio input connectors are 3-pin balanced. Its filter de-interlacing and graphic enhancing allow for high-quality video graphics. The module supports manual parameter adjustment with a dial switch on the board side.

One SD/HD-SDI video signal self-adaptive input

Through up or down conversion, outputs 4 HD/SD-SDI signals

Outputs two loop-through SD/HD-SDI signals

Supports two embedded digital audio outputs

Graphic enhancing eliminates noise from video graphics

Both input and output are available on PAL/NTSC

Supports HD/SD-SDI signal of embedded audio

Supports AFD (Active Format Description)

By de-interlacing filter on video, the module can output video graphics of high-quality

Supports hot swag

Related Questions and Answers

Q: 1. Has anyone used this to input HDMI from PC to an SDI input , on the BMD 1 M/E Switcher? We tried using a Decimator MD-HX and have not had any luck.Thanks!

A: 1st, your Payload: BMD ATEM by default is 1080i / 59.94; Delivery: SMPTE Level B. Your Decimator MD-HX, those are configured by default as Output Converters. Install the Decimator control Panel to configure (Decimator)as an Input Converter. It will do what you want.The DAC-70s are SMPTE Level A. At 1080i / 59.94, they will work as long as the Payload remains 1080i / 59.94. Delivery: SMPTE Level A or B, does not matter at that rate. We use both DAC-70's & Decimators, among other Converters, with our BMD ATEM 2 M/E Production Studio 4K Video Switch. Hope that helps!

Q: 2. does it embeds RCA Audio Input onto HDMI Output (just like what DAC-8P does, if we want to chose audio from RCA instead of HD-SDI)? please refer here a href= http://www.bhphotovideo.com/c/product/867307-REG/Datavideo_dac8p_HD_SD_SDI_T_HDMI_Converter_Up.html target= _blank http://www.bhphotovideo.com/c/product/867307-REG/Datavideo_dac8p_HD_SD_SDI_T_HDMI_Converter_Up.html/a

A: Using the analog audio input it will embed audio onto the HDMI output.

Q: 3. Anyone know the processing delay? Want to bring a consumer HDMI camera into a 720p system, for IMAG. Thanks in advance for your input.

A: No delay. I have used it for IMAG. SOLID PERFORMANCE.

Q: 4. Eternally grateful for your input... If input VGA at 1024x768 and it is set to output at 1080, will I see pillar boxes and a slight letterbox at the top since it is outputting 1:1 or will it fit to the vertical height? How about for 720? Thanks!!! Steve

A: We are using it similar to what you are describing. If you put VGA in and set output to 1080 it will be full screen. As far as 720, we have not used it yet.Lenny

Q: 5. Can I set up dac-70 SDI output to atem television Hd and HDMI out put to projector ? Anyone try before please help me .

A: Yes that is possible.

Q: 6. I noticed that the power supply comes separately - does that mean that it can alternatively be powered by a computer through the USB port? I am also unclear about the audio inputs. I have never seen that type of jack before...

A: No, it cannot be powered via USB. That is used to provide more comprehensive control, diagnostics, and upgrades to the unit from a PC or Mac. The audio input uses a 6 pin Phoenix connector, Wiring is done by inserting the connector provided with the unit. The wires will need to be stripped and inserted into the connector as described in the manual.

Q: 7. Does this allow for a usb out? It shows a usb port but doesn't mention it in the specs

A: The mini-USB port is used only for device control (using Windows-only software) and firmware updates.Google dac-70 manual for more info.

Q: 8. will this unit convert 1080p 24 to 1080p or i 50 ?

A: You bet it will.

Q: 9. what is the weight of this product?

A: less than a pound. Great box to have..

Q: 10. Is it possible to force the output HD-SDI signal type to be 1080p @ 29.97 regardless of the HDMI or VGA input frequency? and does HDCP pass through this device, such as putting this in line with a computer to a TV and tapping off to use for recording from the HD-SDI output?

A: I use this device for connecting various computers to my professional video switching systems. Yes, whatever the input is, the output is a stable signal at a number of different standards, including 1080p @29.97.I haven't run across any problems with HDCP blocking my use of the signal.That said, I don't recommend using ANY product to bypass HDCP protocols.YMMV....Good luck!Kevin Lawson