The robust T3650CM Master Series Carbon Fiber Tripod from Sunwayfoto is a versatile, feature-rich carbon fiber tripod with a load capacity of 55.1 lb and a maximum height of 63". It folds to a compact 20.5" for storage or travel, and weighs only 4.6 lb.

The carbon fiber legs have water-, dust-, and sand-resistant sealed twist-lock joints for reliable use in harsh environments with a minimum of maintenance. The legs have independent spread and open to three locking angles, making it possible to level the leg set on uneven terrain. They achieve a minimum height of 3" for low-perspective angles and macro imaging. The tripod head platform has a ballast hook, and the included interchangeable 75mm bowl can be changed out within seconds without the need for any tools.

Load Capacity: 55 lb    Working Height Range: 8.8 to 67.3"    Folded Length: 24.8"    Arca-Type Ball Head    5-Section Carbon Fiber Legs, Twist Locks    1/4"-20 Accessory Mounts    Weighs 5.8 lb

• Independent leg spread
• Leg angles: 23, 55, 85°
• Interchangeable 75mm bowl
• Head platform with ballast hook
• 1/4"-20 accessory mount sockets
• Interchangeable spiked feet

Related Questions and Answers

Q: 1. Can anyone what temperature ranges this tripod can be sued in? The printed warranty states that is covered only to 70 degrees fahrenheit. Surely that can't be correct. My living room is warmer than that.

A: I've had it exposed to temperatures ranging from 2 degrees to 45 degrees Celsius. That's about 35 to 118 Fahrenheit. Though I know it's been stored in places where it gets up to 48-60 Celsius. No problems so far.

Q: 2. What is the difference between the G-lock Ultra twist locks and the Traveler G-lock system?

A: The G-Lock Ultra is better sealed and more resistant to dust and debris getting inside.

Q: 3. Can I buy the an extra Gitzo base plate for this?

A: Yes, if you want the Gitzo brand plate, you can purchase it. Click the link below to view; https://bhpho.to/3hwXAWL

Q: 4. Is there a screw or something else which prevents the tripod head from becoming loose without a tool?

A: No screw included - but it has friction control

Q: 5. Does the weight of 2.95lb includes the weight of the head? Thanks!

A: The legs weigh 2.95lbs and the head weighs 1.1lbs.

Q: 6. Can you buy this without the ball head?

A: Here are the legs by themselves:https://a href= http://www.bhphotovideo.com/c/product/1175116-REG/gitzo_gt2545t_series_2_traveler.html target= _blank www.bhphotovideo.com/c/product/1175116-REG/gitzo_gt2545t_series_2_traveler.html/a

Q: 7. What is the folded tripod width/thickness?

A: 4.5 x 17 inches.

Q: 8. Is the combined weight of the legs and head 1.98 lbs or do you add on the additional 0.9 lbs for the head?

A: The weight of the Gitzo GIGT0545T Traveler Series 0 Carbon Fiber Tripod, B&H # GIGT0545TUS, would be 1.97 lbs (0.895 kg). The weight of the Gitzo GH1382TQD Series 1 Traveler Center Ball Head, B&H # GIGH1382TQD, would be 0.86 lbs (0.39 kg). As such, the combined weight of the Gitzo GT0545T Series 0 Traveler Carbon Fiber Tripod with Center Ball Head, B&H # GIGK0545TKT, would be 2.83 lbs (1.285 kg).

Q: 9. Will the ballhead fit properly with the smallrig A7C II Baseplate's built-in camera plate (BH #SM4439)?

A: Gitzo GH1382TQD Series 1 Traveler Center Ball Head with Arca-Type Screw Knob QR Receiver included with Gitzo GT0545T Series 0 Traveler Carbon Fiber Tripod has a standard arca clamp. SmallRig Bottom Mount Plate for Sony a7C II & a7CR has a standard arca dovetail therefore it will slide through the clamps on the Gitzo head.

Q: 10. will this tripod work with my Canon 1 dx MK III and a 70-200mm 2.8 lens?

A: Yes the Gitzo GT0545T Series 0 Traveler Carbon Fiber Tripod with Center Ball Head can support up to 22 pounds.