The T4040CM+IB-60 Master Series Carbon Fiber Tripod and IB-60 Ball Head Ball Head from Sunwayfoto is built for the field, providing stability at all ranges, from close-range shots to long-range targets. Manufactured using advanced CNC technology for maximum precision and quality, this carbon fiber tripod reduces your load and helps hold a rifle steady for long periods of time. It provides a working height of 7.6 to 66.9" and has a load capacity of 55.1 lb.

Load Capacity: 55.1 lb    Folded Length: 26.8"    4-Section Carbon Fiber Legs, Twist Lock    Water & Dustproof Construction    Weighs 6.2 lb    Working Height Range: 7.6-66.9"    Rubber Feet & Stainless Steel Spikes    Counterweight Hook    Lightweight Hallowed-Out Design

The tripod ships with stainless steel spikes for outdoor shooting whether it is on soft ground or sand.

Easy to switch between the platform and the replaceable 3" bowl without any tool.

Silicone lock grips do not slip even with sweating hands and provide a comfortable handgrip.

There are vent holes inside the leg tubes that ensure efficient air inflow and exhaust when pulling or pushing back the leg tubes in order to extend and fold the tripod swiftly and smoothly.

Sealed twist locks effectively prevent water, sand, or dust from entering the locks and the tubes.

The hollowed out tripod apex provides high-quality carbon fiber tubes, ensuring the tripod is easily carried on the road.

The counterweight hook under the apex allows you to hang a bag or backpack to further stabilize the tripod in windy conditions.

Carbon leg tube diameters of 1.5/1.4/1.3/1.1" ensuring stable support.

3-leg angle stops at 23, 55, and 85°.

Rubber feet provides stability on smooth surfaces and protects the floor it is on from scratches.

Related Questions and Answers

Q: 1. Is this tripod large and study enough for a Fuji GFX 50R with an 250mm lens?

A: The Gitzo GT1545T Series 1 Traveler Carbon Fiber Tripod with Center Ball Head is suitable for the Fujifilm GFX50R with a Fujifilm GF 250mm Lens.

Q: 2. Is the combined weight of the legs and head 1.98 lbs or do you add on the additional 0.9 lbs for the head?

A: The weight of the Gitzo GIGT0545T Traveler Series 0 Carbon Fiber Tripod, B&H # GIGT0545TUS, would be 1.97 lbs (0.895 kg). The weight of the Gitzo GH1382TQD Series 1 Traveler Center Ball Head, B&H # GIGH1382TQD, would be 0.86 lbs (0.39 kg). As such, the combined weight of the Gitzo GT0545T Series 0 Traveler Carbon Fiber Tripod with Center Ball Head, B&H # GIGK0545TKT, would be 2.83 lbs (1.285 kg).

Q: 3. Would this tripod be sturdy enough to hold Nikon d850 with a 200-500mm lens?

A: Yes.

Q: 4. Between the head and the tripod, is there a set screw, to prevent rotation of the head? Most other tripods have such a feature.

A: Yes, the Gitzo GT1545T Series 1 Traveler Carbon Fiber Tripod with Center Ball Head does have a set screw.

Q: 5. I have a canon 5D Mark III with canon 16-35 f4IS and canon 70-200 f2.8Is II. Could you tell me wich plate from Gitzo I need to get for the ring that comes with the 70-200 and what plate for the camera and smaller lens combo?

A: Hi there,This is a great travel tripod that I've even used a 400 2.8 lens on. The standard plate that comes with it if you used the right point for balance, I also purchased the GIGS5370D plate that is slightly bigger. There are many other plates, brakes that can be used. Just remember the tripod is light so if you are putting a lot on top the wind and other factors come into it. Basically after carrying other tripods around the world, my Gitzo traveller is a dream.

Q: 6. Does it come with a tripod bag ? Thanks

A: No, included In the Box would be the following Gitzo GIGT2545T Traveler Series 2 Carbon Fiber Tripod Gitzo Set of 3 Replacement Rubber Leg-Tips Short Column Shoulder Strap Limited 6-Month Warranty, Extendable to 10 Years with Online Product Registration Gitzo GH1382QD Series 1 Center Ball Head GS5370SD QR Plate Limited 6-Month Warranty, Extendable to 10 Years with online Product Registration

Q: 7. Is there a screw or something else which prevents the tripod head from becoming loose without a tool?

A: No screw included - but it has friction control

Q: 8. will this tripod work with my Canon 1 dx MK III and a 70-200mm 2.8 lens?

A: Yes the Gitzo GT0545T Series 0 Traveler Carbon Fiber Tripod with Center Ball Head can support up to 22 pounds.

Q: 9. Do the feet unscrew? Incase I need to change them as they get worn over time

A: Yes the feet unscrew for replacement. Note, however, the feet on the Series 1 Traveler kit use a different size screw attachment than Gitzo's interchangeable feet which are used on their beefier tripod models.

Q: 10. What kind of L Bracket can I use with this Tripod? I have a 5DMIV also

A: I'm using the Really Right Stuff L Brackets for my 5DMIV and my Panasonic GH5. They work very well. The only thing you have to do to make the RRS brackets work with the Gitzo ball head is remove the small silver safety screw on the top of the ball head. It's a Gitzon unique screw that is unique to the Gitzo mounting plate and is unnecessary for the RRS bracket and prevents it from attaching to the ball head.