Attach this DJI Focus Pro Grip to either side of your DJI R3 Pro or RS 4 Pro gimbal and control your Focus Pro Motor configuration for precise FIZ. The grip has an integrated 1.8" touchscreen display, front dial, mode button, and record buttons for intuitive control over your camera and lens operations. Toggle AMF mode to engage autofocus, causing the front dial to rotate simultaneously and allowing cinematographers to visually observe the focus status on the monitor and via tactile feedback. Manual mode can then be engaged and disengaged intuitively.

Three USB-C ports facilitate communication between the Focus Pro LiDAR unit, Focus Pro Motor, and your camera. 2.4 GHz and Bluetooth communication allow for wireless transmission. Use the built-in NATO clamp and included adapters to attach the grip to either side of your gimbal configuration. A built-in battery keeps the grip running for 2.5 hours at a time, and it can recharge via PD fast charging technology using the USB-C port.

For RS 3/4 Pro Gimbal Stabilizers    Facilitates Focus Pro Motor FIZ Control    Front Dial, Mode Button, Record Button    1.8" Touchscreen Display    Mounts via NATO Clamp    USB-C Communication Ports    2.4 GHz and Bluetooth Communication    Built-In Rechargeable Battery

Related Questions and Answers

Q: 1. Can this communicate with a Ronin 4D?

A: The DJI Focus Pro Grip does not communicate with the DJI Ronin 4D 4-Axis Cinema Camera 6K Combo Kit at this time.

Q: 2. Is there a way to mount the grip onto a horizontal nato rail? How? All seems to require vertical nato rail

A: Yes, the rosette on the DJI Focus Pro Grip can be loosened and rotated in order to mount on a horizontal NATO rail.

Q: 3. The DJI Focus Pro LiDAR is compatible with Cinema Lens only?

A: The DJI Focus Pro LiDAR was designed to be used with cinema lenses, but it could also be used with electronic focus photo lenses when using the DJI Follow Focus Pro Motor (https://bhpho.to/4hg1BNY) and the included DJI Focus gear strips.

Q: 4. Is there any cable longer than 300mm to power it via focus pro grip? The supplied cable is 300mm and is too short

A: USB-C cables top out at 16.4' in regard to powering devices. To go further than this you will need to use a USB-C cable with fiber optics.

Q: 5. Can you use the focus grip with only the motor and no lidar?

A: Yes, that is correct. You will not need the DJI Focus Pro LiDAR (BH #DJFPL) to use the DJI Focus Pro Grip, it can be used to control the DJI RS 3 Pro/RS 4 Pro gimbal's focus motors, or the DJI Focus Pro Motor (BH #DJFPM) as is.

Q: 6. DJI Focus Pro Grip can i connect it wireless to the system so i am able to select subject tracking and focus + start recording ?

A: Yes, with supported cameras the grip would control focus and start/stop from the handle. The Handle would also power a servo motor. Lidar Pro as well. It is designed to only work with products in the DJI ecosystem. We would suggest working with the DJI Focus Pro Hand unit and Hi Bright monitor B&H # DJHBRM or DJI Transmission with High-Bright Monitor Combo BH #DJTRC for wireless control. Camera compatibility: https://bhpho.to/49Y7ET4

Q: 7. Is there way to track an object with the lidar and the grip? Or is this really just working for faces and some cars?

A: Tracking must be done with the DJI Raveneye combined with whichever DJI RS series you are using with the DJI Focus Pro Grip.

Q: 8. Will this work with the DJI LiDAR Range Finder for RS 3 Pro?

A: No, the DJI Focus Pro Grip is designed to integrate the newer DJI Focus Pro LiDAR for use with the DJI RS3 Pro Gimbal Stabilizer system.

Q: 9. What are the latest accessories need to get this work with the transmission system?

A: The DJI Focus Pro All-In-One Combo and DJI Transmission with High-Bright Monitor Combo currently do not integrate.

Q: 10. Does this kit come with the battery for the hand unit? Or is this something we need to buy extra?

A: The DJI Focus Pro Hand Unit included in the DJI Focus Pro All-In-One Combo does not come with a battery included. An NP-F550 battery such as the Watson NP-F550 Lithium-Ion Battery Pack (7.4V, 2200mAh), BH #WANPF550, would be necessary to operate the hand unit.