Designed for both the RS 3 Pro and RS 4 Pro gimbal stabilizers, the DJI Focus Pro LiDAR unit makes achieving intelligent autofocus intuitive and easy for solo cinematographers. The rangefinder unit makes focusing on objects in motion a breeze thanks to its expanded 76,800 ranging points, 30 Hz refresh rate, and 65.6' maximum detection area. This allows it to support both wide-angle and telephoto lens configurations.

The unit features a built-in camera with an equivalent 30mm focal length and 70° field of view to ensure accurate focus. Toggle between wide-angle, telephoto, and focus spot modes depending on the needs of your shoot. ActiveTrack Pro is activated when paired with the RS 4 Pro gimbal for improved recognition and tracking performance with multiple subjects or subjects at a distance. It is compatible with the Focus Pro Motor to provide accurate cinema-style autofocus. The LiDAR unit mounts on your RS 3 or 4 Pro series gimbal or camera via cold shoe or 1/4"-20 thread, and it is powered via a USB-C power cable.

Designed for DJI RS 3/4 Pro Gimbals    76,800 Ranging Points    Built-In Camera with 70° Field of View    65.6' Detection Range, 30mm Focal Length    Wide-Angle and Telephoto Modes    Flex Spot, ActiveTrack, Object Detect    Works with Focus Pro Motor for Autofocus    USB-C Input Ports    Cold Shoe Mount, 1/4"-20 Thread

When paired with the Focus Pro Motor, the LiDAR unit can facilitate autofocus with compatible lenses. The unit's 76,800 ranging points can project within a 1.6 to 65.6' area. It also features a built-in camera with an equivalent focal length of 30mm and a wide FOV of 70°, catering to the focusing needs of most scenarios.

The next-generation ActiveTrack Pro can directly read images from the camera built into the Focus Pro LiDAR Autofocus without needing the Ronin Image Transmitter. When using ActiveTrack Pro, you can directly monitor or frame the subject on the RS 4 Pro's OLED touchscreen. Even if the target is briefly obscured, the LiDAR unit can quickly relocate and retain focus.

• Tracking: Recognize up to five subjects at the same time and select one to follow
• Smart Object Identification: Human and vehicle
• Flex Spot: Activate focus lock by framing the subject and pressing the gimbal trigger; supports autofocus only
• Wide: Automatically detects subject and follows focus; supports autofocus and ActiveTrack

Use the USB-C data port to connect the LiDAR unit with the Focus Pro Motor for cinematic autofocus capability after calibration. Press the M button on the gimbal to switch between manual and autofocus with ease.

Related Questions and Answers

Q: 1. Can the DJI Focus Pro Lidar be used with the DJI Focus Pro Grip only? I have a DJI RSC2 but want to use it without a gimbal.

A: The DJI Does not support the RSC2 gimbal. But you could consider the Focus Pro handle kit which will will work as a stand alone solution, no gimbal required. DJI Focus Pro Creator Combo BH #DJFPCC • MFR #CP.RN.00000404.01

Q: 2. Is it possible to run a Tilta Nano Nucleus focus wheel with this system?

A: The DJI Focus Pro LiDAR would not support other brands of follow focus solutions. It would only work within the DJI ecosystem.

Q: 3. Is this compatible with dji rs2?

A: At present time, the DJI LiDAR Range Finder for RS (B&H# DJRSRF) is only compatible with the DJI RS 3 Pro Gimbal Stabilizer (B&H #DJRS3P) and there has not been any announced intention to make it work with any other gimbal(s) as of this time.

Q: 4. Is this the same as the new DJI Lidar Pro?

A: The DJI LiDAR Range Finder for RS 3 Pro increases the ranging points from 43.200 to 76.800 ranging points. The additional ranging points would mean the new Lidar focus Pro will be more accurate. Also, the maximum range has been increased from 46 feet to 65 feet. The Lidar Pro also has support for human and vehicle recognition.

Q: 5. The DJI Focus Pro LiDAR can be use without a gimbal just attach to the camera?

A: The DJI Focus Pro LiDAR cannot be used as a standalone unit. To use the DJI Focus Pro LiDAR, you will need a compatible DJI gimbal or the DJI Focus Pro Creator combo, which can be found here: https://bhpho.to/4f3KnSG.

Q: 6. Will this also take care of active track without Raveneye?

A: Yes, The DJI LiDAR Range Finder for RS gimbals would also provide motion tracking data to the gimbal. The LiDAR Range Finder (RS), RS 3 Pro supports ActiveTrack Pro, delivering better subject identification and tracking performance.

Q: 7. Will this item work with the new Panasonic Lumix S5D in AF mode?

A: Yes, the Panasonic Lumix S5D adds compatibility for the DJI Focus Pro LiDAR autofocus to the camera.

Q: 8. Does this track objects on an RS3 Pro unlike my current lidar that only tracks faces?

A: The DJI Focus Pro LiDAR does not offer any tracking features. It tracks distances only.

Q: 9. Wich lenses can the rangefinder interface directly connect to via 4-pin lemo to not need to calibrate the lenses? Would Cooke /I and Zeiss/XD work via 4-pin lemo port?

A: So far, these are the lenses that have been announced as working with the DJI LiDAR Range Finder for RS (B&H# DJRSRF) without calibration, and none other: DZOFilm VESPID Cyber Full Frame 35mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC03521) DZOFilm VESPID Cyber Full Frame 50mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC05021) DZOFilm VESPID Cyber Full Frame 75mm T2.1 Prime Lens (PL & EF Mounts) (B&H# DZOVC07521)

Q: 10. What other equipment do I need to have the camera on a tripod and use the DJI LiDAR Range Finder?

A: The DJI LiDAR Range Finder for RS 3 Pro & RS 4 Pro would require the DJI RS 3 Pro Gimbal Stabilizer Combo, B&H # DJRS3PC, or the DJI RS 4 Pro Gimbal Stabilizer Combo, B&H # DJRS4PC, which comes with a focus motor. The gimbal has a tripod mount that you could use to attach it to a tripod.