The Rail Mount with 3" Riser and Round Camera Base from RAM MOUNTS allows you to mount an action camera or other small camera to rails such as handle bars between 0.5 and 1.25" or 1.6 to 3.2" in diameter. The rail base can be secured either with a metal U-bolt, which includes a reducer for smaller diameter tubes, or an adjustable strap that can be tightened to an exact size. The base connects via ball joint to a 3" riser component providing camera articulation, helping you achieve the optimal shooting angle. Finally, a 2.5" diameter camera base, fitted to the riser via a ball joint of its own, enables the attachment of a camera that has a standard 1/4"-20 socket.

U-Bolt for 0.5 to 1.25" Diameters    ATV/UTV Strap for1.6 to 3.2" Diameters    For Handle Bars, Roll Cages and More    Fully Articulated Ball Joint Design    Tighten or Loosen with Single Knob    Camera Plate with Standard 1/4"-20 Stud    U-Bolt and Strap Fastener Included

Mount camera on ATV/motorcycle handle bars, bicycle handle bars, roll cages, or pretty much any other tube or rail

Metal U-bolt with reducer for 0.5 to 1.25" diameter rails

Adjustable ruber ATV/UTV strap for 1.6 to 3.2 rails

Interchangeable with other RAM MOUNT products that use a "B" size (1" diameter) ball joint

Single spring in extension arm opens sockets at both ends, allowing you to pivot the ball and socket connection

Compatible cameras include: Contour GPS, Contour HD,

Gobandit GPS-HD,

GoPro HD Helmet HERO,

GoPro HD Motorsports HERO,

GoPro HD Surf HERO,

GoPro Helmet HERO Wide,

GoPro Motorsports HERO,

GoPro Motorsports HERO Wide,

GoPro RC HERO,

GoPro Surf Hero, and

GoPro Wide HERO

Rubber caps included to cover the ends of U-joint

Constructed from powder coated marine grade aluminum with rubber ball joints

Related Questions and Answers

Q: 1. How tall is it over all?

A: When standing straight up the height is approx. 10 .

Q: 2. Hello, Can anyone tell me if this will fit on the thread of the Joby Action Grip & Pole?Thanks

A: Unfortunately no.

Q: 3. will this fit a garmen gps nav?

A: Possibly, depending upon the specific Garmin model and its dimensions.

Q: 4. Is this VESA compatible? (100 x 100mm and 75 x 75mm)

A: This is only the base adapter. It requires additional hardware. It is not VESA compliant. RAM offer this complete solution: RAM MOUNTS TRIPLE SUCTION CUP BASE WITH VESA B&H # RAP365101246 MFR # RAP-365-101-246U

Q: 5. The description doesn't include the part that connect to the pole, which shown in the picture. Is it included?

A: Yes. All you need is the pole and you are good to go.

Q: 6. Will this work with an iPhone 14 Pro?

A: The RAM Mounts Flex Adhesive Double Ball Mount for Apple MagSafe, B&H # RAPB378APMAG, is compatible with iPhone models that support MagSafe, which are the iPhone 12, 13, 14, 15, and 16 series.

Q: 7. Will this support an lg 27 inch monitor?

A: This is only the base adapter. It requires additional hardware. It is not VESA compliant. RAM offer this complete solution: RAM MOUNTS TRIPLE SUCTION CUP BASE WITH VESA B&H # RAP365101246 MFR # RAP-365-101-246U Please contact RAM Mounts directly for weight limits: By Phone Monday–Friday 7:30 AM – 5 PM, Pacific Time (closed holidays) 1-800-497-7479 (Toll-Free) 1-206-763-8361 (Seattle, WA) By Mail National Products Inc. 8410 Dallas Avenue South Seattle, WA 98108, USA

Q: 8. Will this work for a Garmin Drive 51?

A: Garmin Drive 51 Dimensions:5.5 x 3.3 x 0.8 / 14.0 x 8.4 x 2.0 cmRam Mount RAM Handlebar U-Bolt Mount with Universal RAM X-Grip Large Phone/Phablet Cradle:Cradle Dimensions:Minimum Width = 1.75 (Minimum Height = 5.5 )Maximum Width = 4.5 (Minimum Height = 3.25 )Depth = 0.875

Q: 9. What is the dimension of the six inch flex arm? Could you attach a side mount to it for an iPad?

A: It is about the size of the ring finger, but if you want for the iPad you are better off purchasing the RAM MOUNTS RAM-A-CAN II Universal Cup Holder Mount with Tab-Tite Universal Clamping Cradle for Large Tablets with Heavy Duty Cases instead.

Q: 10. Is this a cradle and a ball mount as one item, or does the cradle attach to the ball mount?

A: The RAM MOUNTS Garmin VIRB Camera Adapter with 1" Diameter Ball will have a release button to detach this cradle.