The beige Galaxy Audio HSM4F Dual-Ear Headset Microphone with 4 Cables is a fully adjustable headset and four detachable 4' cables designed for compatibility with Electro-Voice wireless transmitters (available separately). The headset provides a practical, economic, and hands-free audio capture solution for applications such as speeches, lectures, board meetings, and more. The 5mm electret condenser element utilizes a forgiving omnidirectional polar pattern, yields a frequency response of 85 Hz to 15 kHz, and can handle SPLs up to 110 dB.

The soft microphone boom allows for easy adjustment of the microphone's position from 1.5 to 7.9" as you wear the headset, which hooks around both ears for added stability. The headband adjusts from 8.5 to 15" to accommodate almost any head shape and size and is lightweight and comfortable, even for long periods of time, without using excessive pressure to hold the microphone in place. The supplied windscreen minimizes wind noise and vocal pops and remains discreet when installed.

For Electro-Voice Transmitters    Headband Adjusts from 8.5 to 15"    Hooks Around Both Ears    5mm Electret Condenser, 110 dB SPL    85 Hz to 15 kHz Frequency Response    Omnidirectional Polar Pattern    Mic Boom Adjusts from 1.5 to 7.9"    Includes Windscreen    Includes Four Easy-Replace Cables

Fully adjustable headband with dual-ear hooks around both ears for a stable and comfortable fit

Omnidirectional back-electret condenser with 5mm element

Soft microphone stem allows easy positioning

Includes four detachable 4' cables, each terminated with a TA4F connector for Electro-Voice wireless transmitters

1.5mm-thick cables won't weigh you down

Includes windscreen to guard against wind noise

Strain-relief clip inhibits damage to connector

Folds flat for storage and transport

Related Questions and Answers

Q: 1. I need to communicate between instructor and student in tandem seated sailplanes. Will the dual-ear Eartec ultralite headset work? what do I need?

A: You could use two of the Eartec UltraLite headsets.

Q: 2. Are these the 3/4 wide webbing?

A: The webbing used on the Adjustable is indeed 3/4 wide. The actual connector to the camera is 3/8.

Q: 3. How wide is the rectangular mount? Top to bottom when looking at it horizontally! Looking to purchase for a different Z stand...

A: Thank you for your email. At this time the manufacturer has not made that specification available as it is meant to be mounted to either side of any QuikLok Z stand except for the Z-722 or Z-722L

Q: 4. I need replacement earmuffs/earpads for my Eartec UltraLITE sets. What earmuffs are compatible with the Eartect Ultralites?

A: You can purchase Eartec Replacement Leatherette Earpads for UltraLITE Headsets (2-Pack) which are listed as B&H item# EAULEPD. We do currently have the replacement earpads available in stock.

Q: 5. Can the master headset also be a regular one? I want to have one dual ear and single master unit to cover different environments. So if I use the dual ear as the 'master' - can my other 'master' single ear be used as a regular unit? Sorry - bit hard to explain.

A: Yes of course but the two will not be able to talk to each other. Basically, all the remote headsets attached to the dual ear master will not be able to talk to the remote and master of the single ear. Hope that makes sense. You may want to look into getting The HUB. It has two channels. Each channel can have up to 3 remote headsets and you can combine channels if you need to or have them separate. You can also plug a wired headset to the hub for a 7th headset. The HUB can be wireless or wired(takes a battery or wired power). Hope this helps

Q: 6. Can this mic boom be used with the Quikloc QL742 double their stand?

A: Bye..not compatible only square bracket

Q: 7. If I plug a phantom power mic into the input and the mic is receiving phantom power from a pre-amp on the other side of the unit through output 1, will the signal of output 2 be the same level as output one? In other words, both outputs would be outputting an identical line level as the mic is already getting its power from output one? Thank you.

A: It may be marginally quieter on each than it would be w/o the splitter, but a phantom powered pre-amp is still only outputting mic level, not line level. Works for me w/ 300' on the out #2 to a production truck.

Q: 8. Does the signal come out in stereo?

A: Signal doesn't come out in stereo. XLRs are commonly use as a mono signal of one source. This is only to split that one signal into two without dropping much on quality.

Q: 9. Do I need a splitter to convert one microphone input into a two microphone amplifier input?

A: Yes, you would need a splitter like this, just make sure you have enough mic cables (3) to make all the connections.

Q: 10. Can the back and seat freely rock back and forth?

A: The reclining feature should allow for tension adjustment on the Balt Butterfly Ergonomic Fully Adjustable Office Chair.