Enjoy matte-white versatility and a flat, uniform surface with the EPV PMT106HT3-E12 PowerMax Tension 56.2 x 89.9" Motorized Projection Screen. The PMT106HT3-E12 is a 16:9, 106" diagonal, tab-tensioned, motorized, wall or ceiling screen featuring EPV's CineWhite 2 screen material.

The CineWhite 2 surface is designed to work with all lens throws to provide light-diffusion uniformity and excellent color rendition for projected images. This screen material has a 1.1 gain, wide viewing angle, and works best in dark or dimly lit environments. The PMT106HT3-E12 ships fully assembled with a 3-prong AC power cord and floating mount brackets to simplify installation. Additionally IR and RF remotes, as well as an on-wall control are included.

106" Diagonal | 16:9 Aspect Ratio    CineWhite 2 Screen Surface    1.1 Screen Gain | 180° Viewing Angle    4K Ultra HD, Active 3D & HDR Ready    Tab Tensioned with Black Backing    Plug & Play 3-Prong AC Power Connection    Works with All Lens Throw Ratios    IR, RF Remote & Wall Controls Included    Wall or Ceiling Installation

CineWhite 2 (Tension Matte White) has broad light dispersion through diffusion uniformity, black and white contrast, and true color rendition, making it the one of the most versatile surfaces in EPV’s tensioned screen product lines. This tension PVC surface is a top choice for today’s high-contrast ratio projectors in commercial or residential presentations. The CineWhite 2 material equals the performance to EPV's MaxWhite FG product but improves the experience with the superior surface flatness. The uniform diffusion surface has black backing to eliminate light penetration and is easily washable with mild soap and water.

• Four-side black masking borders enhance contrast ratio and avoid overscan from projector.
• Black backing on material offers sharper picture and clarity.
• Screen is 4K Ultra HD, Active 3D, and HDR ready.
• Tab-tension system provides a flat uniform projection surface.
• Internal radio frequency and infrared receivers with IR, RF remotes included.
• Included IR extension sensor and a 5-12 volt trigger synchronizes screen operation with the projector’s power cycle.
• Detachable keypad wall switch included for manual UP/STOP/DOWN operation.
• Wireless 5-12V trigger feature works through RF remote for a cable-free installation.
• Streamlined aluminum casing with black enamel coating is moisture resistant.
• Floating mount brackets allow easy alignment for a wall or ceiling installation.
• Screen has suspended ceiling installation capability.

Related Questions and Answers

Q: 1. Can the 3-axis head talk to the CineMoco? I want the cinemoco to tell the head the distance and want to set key frames on the 3

A: At this time Cinetics does not state compatibility between the Cinetics Lynx 3-Axis Motorized Slider and the Cinemoco.

Q: 2. does this work with a Canon EOS M50?

A: Hi Misa! Yes this battery is compatible with the Canon M50.

Q: 3. Can I use my canon charger to charge a Watson battery?

A: Yes, they are compatible with each other.

Q: 4. I plugged this into a fully charged FXLION Nano Three D-Tap and it started beeping with a red light. Both units I bought does this. What's wrong?

A: If the GyroVu 300W High-Power D-Tap to 110V AC Power Inverter with 2 x USB Outputs exceeds the safe operating temperature due to poor ventilation or high temperature of the surroundings the inverter might shut down automatically. A red light will turn on and sound alarm will go off.

Q: 5. does this work on the canon m50? im just making sure

A: Yes, it is compatible with the M50.

Q: 6. Will this power bank be powerful enough for a Godox SK400ii ?

A: The GyroVu High Capacity 42,000 mAh Power Bank with 100W 110V Inverter is not suitable for use with flash.

Q: 7. How long would a 22000 mAh, 2.4 amp output power bank last when connected to a Canon EOS M50 used as a webcam or for streaming?

A: The time of power Canon M5o really depends on the mode it used for. We can't give you exact figure bu we can compare to standard Dea Michael, As we understood your power bank is 22,000 mAh, but usually this just a specification of the battery inside and electronics is eating at least 10-15% of the power bank capacity. So lets assume that it will put out 19,000 mAh. Our up-converting cable is using around 25% of the power to up-convert form 5V of power bank to 8V of LP-E12 dummy battery. So it will be around 18,250 mAh of useful power. The LP-E12 is around 900 mAh, so 18,250 divided by 900 - will be 15-16 times longer than regular LP-E12. This of coarse just rough estimation and will depend on quality and condition of the power bank. Just for your information we also are providing 30,000 mAh and 40,000 mAh power banks. Sincerely, Gyrovu Team.

Q: 8. What size barrel connector is used?

A: The Case Relay Camera Power System B&H # TECRUPS, (the product the Camera Coupler for Canon Cameras with LP-E12 Battery B&H # TECRCE15 connects to) has a barrel connector which is 5.5 mm outside diameter and 2.1 mm internal diameter.

Q: 9. If I don't have a D-Tap Source, Can I solder in a good 12v or 5v adapter on the D-Tap End and use this to power my camera directly for the wall?

A: We are not aware of that being possible with this product.

Q: 10. works with v-mount 26v battery?

A: It will work with any V-Mount battery with D-Tap connector