Watch Doesn T Fit Under Cuff

Lens Cuff Small Diameter Lens Cuff Set 1 With Case And Accessories (65, 75, 85, 95mm)

Product Code: ga152079
Availability: In Stock

$6,525.00 $8,221.50

Qty

3 reviews Write a review

Description
Reviews (3)

Simplify your follow focus motor mount for a more stable connection to your lens with the 65mm Lens Cuff with Inserts for 62.5, 60, and 57.5mm Lens Diameters from Lens Cuff. The Lens Cuff is a durable aluminum cuff that fits around most lenses with a 65mm barrel diameter and provides a solid mount for your follow focus motor directly onto the lens, instead of relying on complex rigging. The Cuff also includes three inserts to fit 62.5, 60, and 57.5mm lens barrel diameters.

The aluminum cuff slips onto any part of the lens and it secures with captive M4 screws. There are two symmetrical 15mm rod clamps on the Cuff to fit the included short 15mm rod for mounting your follow focus motor on either side of the lens. There is a loop on the end of the rod for cable management. On the bottom of the Cuff is a 1/4"-20 thread with anti-twist divots to add an optional lens support for longer and heavier lenses. The Lens Cuff and included inserts and rod all fit in the included Alcantara pouch.

Kit of 65, 75, 85, 95mm Lens Cuff Sets Each Lens Cuff Includes Three Inserts 4 x 15mm Rods, 4 x Carry Pouches Nanuk 908 Hard Case with Custom Foam

Key Specs
Mounting	Accessory Mount: 1x Built-In Anti-Twist 1/4"-20 Female Thread, 3x M4 Male Screw
Clamping Range	2.6" / 65 mm Diameter Pipe/Pole
Rod Standard	15 mm Single Rod
Rod Ports	2x 15 mm Rod Port
Parameters
Color	Black
Pan	No
Tilt	No
Roll	No
Mounting
Mounting	Accessory Mount: 1x Built-In Anti-Twist 1/4"-20 Female Thread, 3x M4 Male Screw
Clamping Range	2.6" / 65 mm Diameter Pipe/Pole
Rod Standard	15 mm Single Rod
Rod Ports	2x 15 mm Rod Port
Included Rods	Yes
General
Materials	Aluminum
Packaging Info
Package Weight	1.78 lb
Box Dimensions (LxWxH)	8.5 x 7.8 x 3"

Machined from a single block of aluminum and hard anodized
Custom spring-loaded wingnut fasteners with standard M4 threads
Low-profile lens support foot with 1/4"-20 thread and ARRI-style anti-twist divots
Two symmetrical 15mm rod clamps
Includes inserts to fit 62.5, 60, and 57.5mm lens diameters

Related Questions and Answers

Q: 1. Will the Cuff fit on a Leica Q2?

A: Yes, as long as you have split rings for the eyelets. If you need rings, click the link below to view; https://bhpho.to/3jnYJ3Q

Q: 2. I have a Nikon z6-2, can you use this with the neck strap installed also?

A: If you have two anchor links attached on one side, then yes you can use both at the same time.

Q: 3. how much is the maximum weight capacity?

A: The anchors are rated at 200lb.

Q: 4. Is there a 80mm insert for the Lens Cuff 95mm (not 85mm)?

A: No, there is no 80mm cuff with the Lens Cuff 95mm Lens Cuff with Inserts for 92.5, 90, and 87.5mm Lens Diameters.

Q: 5. What about the I-Cuff on the Sony FX9 viewfinder, do the product FIT on the Sony Fx9?

A: The i-cuff Pro is too small for the Sony FX9.

Q: 6. Would it fit on a Ricoh GR3 camera?

A: Yes. The Peak Design Cuff Camera Wrist Strap will fit the Ricoh GR series cameras.

Q: 7. I’m finding it a bit awkward to un-snug the strap when I’m done using it. Am I missing some trick?

A: The aluminum-alloy sliding buckle on the Peak Design Cuff Camera Wrist Strap allows you to adjust by sliding the piece back and forth for the most comfortable fit to your wrist.

Q: 8. I know it's been asked but it was a couple years ago but does it still come with the V3 anchors?

A: The current version of this Cuff Camera Wrist Strap comes with the V3 anchors.

Q: 9. Is it Cow leather on the charcoal or is it just on the ash?

A: The leather is only on the leash of the Peak Design Cuff Camera Wrist Strap. It does not extend to the aluminum adjustment clip.

Q: 10. what is the weight capacity of the quick release strings. will it handle my nikon d750, loaded battery grip & 24-120 lens ??

A: For sure it will. I have it on a D610 with the battery grip and a bevy sigma 24-105. I have tested it too and no problem. I really like the strap. It is very well designed especially the magnet to make it like a bracelet when not in use. The build quality is great. Go for it.

Frank	03/07/2024
I have the older version of this strap, and I really like it, especially for my smaller cameras. My only complaint about the old one was it was very difficult to get on and off because I have very large hands, but I made it work and I use it regularly. When this strap became available I saw the video from PD, and figured it might be a little bigger, and it was. It is really well built and now comes with a magnet inside the strap that lets you leave the strap on your wrist and it is snugged out of the way as the magnet holds it in place on your wrist. I use it all the time and find it especially helpful with my GFX 100s, which is a big camera. Here is the caveat - the strap is very comfortable, but when you are changing lenses or doing anything that requires you to disconnect the strap, be mindful that it is disconnected. I caught myself a couple of times leaning out in a precarious position thinking the camera was tethered to the strap when in fact it was curled up on my wrist. I am now especially careful to be certain the strap is connected anytime I am holding the camera. Overall I think it is a fine product, it is very well made, and gives peace of mind when using your camera in precarious situations. 5

Jules	02/05/2024
necessary camera accessory for film camera 5

Elvis E	21/04/2024
I prefer using this vs the neck strap, very handy for city shooting, i feel safer having this on while i take pictures on the go. 5