ARRI continues to expand its LED spotlights with the introduction of the black L7-C Plus RGB LED Fresnel Light. Featuring a manual yoke, the L6-C Plus has a flood to spot capability with a beam angle adjustment of 12-45°. With a larger Fresnel lens compared to the L5-C Plus version, the L7-C Plus is ideal for an extra punch, providing greater throwing distances. The Plus version adopts the uniform, homogeneous light field of its predecessor, while providing up to a 90% increase in output. Similar in size and weight to its previous version, the upgraded L-Series Plus has a new 180W RGBW light engine and firmware technology, operating on the same software as the brand's SkyPanel. Other improvements include direct network connectivity for LAN input and control via Art-Net and sACN protocols. Users will also appreciate simplified onboard control thanks to a familiar and intuitive interface.

Light and 23' Cable with Switch    Output: 113,000 Lux at 3.3' (12°)    2800-10,000K CCT; RGB    Beam Angle: 12-45°    AC Power    CRI 94 | TLCI 89    Onboard, DMX, Art-Net & sACN Control    IP20 Rated    Works with Optional L-Series Accessories    Includes 1 1/8" Junior Pin

Designed as the brightest ARRI full-color Fresnel fixture, the L7-C Plus has a 7" light aperture that offers an increased output up to 90% depending on your settings, such as beam angle and CCT. This fixture has a peak intensity of 113,000 lux at 3.3' (spot beam at 5600K).

The 100-0% dimmable L6-C Plus is a "fully tunable" white light source, allowing you to match existing fixtures with color temperatures from 2800 to 10,000K. The onboard controller allows full minus-green to plus-green adjustment as well as RGB+W color gamut color mixing with hue and saturation control, enabling matching of specific shades and skin tones. A wide selection of gels are available as well. CRI of 94 and TLCI of 89 ensure color accuracy.

All functions can be controlled via DMX, an ideal feature for broadcast studios, while RDM permits monitoring of the light's status. Control and configuration are extended via Art-Net, sACN, and web page control of light and settings via HTTP.

Power options include the L7-C Plus's 100-240 VAC onboard power supply. A required power cable does not come with this light and needs to be purchased separately.

A key element of the versatility of traditional Fresnels is the ability to spot and flood the beam as needed. Whether it's a flood field for a pullback shot or a tight spot for a bright highlight, the continuous focus-ability of the L-Series Plus performs lives up to your expectations. And, unlike traditional Fresnels, which have significant light waste in spot focus, the efficient L-Series Plus optical system maintains the same field lumens in all focus positions.

Clear, defined shadows have traditionally been solely a trait of single source tungsten and daylight fixtures. ARRI L-Series Plus Fresnels provide the same single shadow properties lighting designers expect, delivering natural results.

The ARRI sliding stirrup design enables precise adjustment of the fixture's center of gravity to compensate for front-end accessories. It also gives the option of pulling the fixture back and reducing its hanging height.

Two focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reaching around the fixture.

The strong tilt-lock provides extremely secure locking, eliminating movement and slippage and ensuring that the fixtures will stay where you put them.

The L7-C Plus allows for firmware updates through the USB port, making sure the light will always perform at its best.

The light is compatible with optional accessories, including the ones that were made for previous L-Series lights. Additionally, the separately available SkyPanel remote can also control the L-Series Plus through a USB connection.

• Long-term performance for 50,000+ hours
• Daisy-chain power and data
• IP20 rated
• CE, UKCA, CB, ENEC, cNRTLus, FCC, PSE certifications

Related Questions and Answers

Q: 1. Since this is the Hanging version is it still possible to use on stands if need be?

A: It is possible to use this version on a light stand, however this version comes with bare ends - meaning there is no power connector on the end of the power cord. You would have to install one yourself. In addition the power cord is shorter than the stand mount version.

Q: 2. What is the noise level in dB for each one?

A: Noise emission Ambient temperature = 35° C (95° F). . . . . . . . . . . . . . . 20dB(A) Ambient temperature = 45° C (113° F). . . . . . . . . . . . . . 30dB(A)

Q: 3. What's the warranty?

A: The Visionsmith ReLamp 650 LED for ARRI 650 Plus Fresnel (Tungsten) has a limited 2-year manufacturer warranty.

Q: 4. Will this fit in a 0350 Pelican case?

A: Yes, the Arri L7-C LE2 LED Fresnel can fit into a Pelican 0350 case.

Q: 5. How rugged is the ReLamp? What do I need to do when I travel?

A: We find this lamp to be quite rugged. You can leave it installed in your fixture as long as you have a suitable travel case for the fixture.

Q: 6. Can this be mounted on a Matthews Hollywood Beefy Baby Stand - Triple Riser, 12' 4 using Junior to Baby adapter? If I buy 3 of these lights will it come with a case that will fit all of them? If not what case could fit all 3 of these?

A: Yes, a Matthews Junior Baby Adapter will work. I recommend getting a stand that has a junior female so you do not need an adapter. And the stand you picked is just on the edge of the supported weight. The stand I would recommend is a Matthews Hollywood Combo Steel stand. Arri does not have the lights in kits that include a case.Most cases not custom made are will not hold three in one case. Best is to pack the lights in their own case.There are than options. This one can cold one light with accessories, Explorer Cases Large Hard case 5833.

Q: 7. What is the smallest Pelican Case that can fit the Arri L7 with its included accessories?

A: The smallest Pelican case I can recommend to hold an Arri L7 with accessories is the Pelican 0500 Transport Case (Black) B&H # PE0500B.

Q: 8. Are these bulbs tough? Would they last if I set up the lights and tear down every day for different jobs?

A: Yes, these bulbs are tough, so they can last for quite a white between set-ups and tear downs.

Q: 9. Would This work with a Strand Or Colortran Theater Lighting Fresnel? Or only with the Arri?

A: This lamp was purpose built for the Arri.

Q: 10. could this fit in a tweenie 2 mole richardson fixture?

A: The Visionsmith ReLamp 300 LED for ARRI 300 Plus Fresnel (Daylight) BH #VIVSFKWD is specifically for the Arri 300 Plus housing.