Extend USB-C signals and power up to 328' using Catx cables with the MS-6U1CP USB-C & 12V Power Extender Set from MSolutions. With data rates of up to 320 Mb/s, this set may be used with USB-C PTZ cameras, hard drives, laptops, and other compatible peripherals. Also featured is RS-232 serial passthrough, 12V PoC (Power over Cable) from the host side to supply 12V/2A of DC power for connected equipment on the device side, and micro-USB ports for firmware updates and control.

Extend USB-C Connections up to 328'    USB-C, RJ45, and Micro-USB Connectivity    Signal Extension via Catx Cable    Bi-Directional RS-232 Serial Passthrough    Data Transfers up to 320 Mb/s    Bi-Directional 12V PoC

• Solves the challenge of extending USB camera data and power over a single category cable up to 328'
• 12V output on Device side for remote powering of connected VC equipment (or PoC to the TX if power to the VC device is not required)
• One USB-C channel for up to 320 Mb/s data connectivity of USB-C devices across the link
• Flexible USB extension for USB-C PTZ cameras, hard drives, laptops, and other USB-C peripherals
• Bi-directional RS-232 serial pass through
• Bi-directional 12V PoC (Power over Cable)

Related Questions and Answers

Q: 1. Is this compatible with the Blackmagic Production Camera 4k?

A: No, the Blackmagic Design Power Supply 12V12W Locking Converters is not compatible with the Blackmagic Production Camera 4k.

Q: 2. Is this adapter good for my SmallHD focus 5" camera monitor?

A: Yes. That is correct! The Watson Pro 12V 2A Power Supply (2.1mm) will work with The SmallHD focus 5" camera monitor. The For example the 5" OLED unit below has the 2.1 mm size. https://store.smallhd.com/store/FOCUS-OLED-Micro-HDMI-Monitor

Q: 3. Would this power a Sony DVR-11 Mini DV Tape Deck?

A: Yes, the Watson Pro 12V 2A Power Supply (2.1mm) should work with the Sony DSR-11 Recorder player.

Q: 4. Is this compatible with the Yongnuo YN6000 Bi-Color LED Panel?

A: Yes, this power supply is compatible.

Q: 5. Can this be used to power the Accsoon CineEye II Pro transmitter or receiver?

A: No it can not.

Q: 6. Will this work with the BMCC 2.5K?

A: No, please review the following item. Blackmagic Design 12V Power Supply for Select Hardware BH #BLPSUSP • MFR #PSUPPLY-12V30W https://bhpho.to/3tfuBgO

Q: 7. Hi,My Yongnuo 600 RGB specifies a 8v, 5A MAX power supply required on the back.Would it be safe to use this or a similar 12v, 5A power adapter?Thanks

A: Yes, this is compatible with the Yongnuo YN600, YN600II and YN300AIR lights.

Q: 8. will this power adapter work for my dvr? https://amcrest.com/catalog/product/gallery/image/29576/id/389/ also, see other pics.

A: Yes, the Watson Pro 12V 2A Power Supply (2.1mm) is compatible to power your DVR.

Q: 9. Will this work on typical Western Digital MyBook hard drives?

A: We are not aware of specific compatibility between this power supply and any hard drive. It is a best practice to use only the power supply provided by the manufacturer.

Q: 10. The Does this power supply work with Black Magic design converters?

A: The Blackmagic Design Power Supply 12V12W Locking Converters BH #BLPSLY12V12W is ideal for UpDownCross HD, MultiView 4 HD, and converters with locking connector. For non locking connector like those on many mini converters, the Blackmagic Design PSUPPLY-INT12V10W Power Supply for Mini Converters BH #BLPSMC is a fine option. https://bhpho.to/3xOjxY6