This digital camo Neoprene Cover from LensCoat is a protective covering designed to fit the Sirui PH-20 gimbal head. Its closed cell neoprene construction helps to shield the PH-20 from routine wear and tear and also acts as a thermal barrier, protecting the users hands from hot or cold components.

For those photographing in the outdoors, the cover's color and pattern help to break up the shape of the PH-20, reducing its visibility to wildlife and helping you to hide in plain sight.

Protects PH-20 from Wear and Tear    Reduces Visibility to Wildlife    Closed Cell Neoprene Construction    Acts as Thermal Barrier

Related Questions and Answers

Q: 1. Does the PH10 have the same horrible drag adjustment in pan as the PH20, or did they fix it and get rid of the ratcheting at very slight drag?

A: As far as I am aware, both the PH10 and PH20 have the same pan lock mechanism. Neither are known to have adjustable pan drag; it is simply a pan locking knob with no adjustment to tension.

Q: 2. Does the PH-10 also fit the new Nikon Z 180-600mm? Not in terms of weight, but in terms of the lens axis being in the vertical p

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head will fit the Nikon Z 180-600mm without a problem.

Q: 3. What is the height between the base of the tripod mount & the base plate for the camera mount?

A: Sirui PH-10 Carbon Fiber Gimbal Head has a adjustable vertical plate. Therefore you can adjust the height of the camera plate. The minimun distance between the the gimbal base mount on camera plate is 76mm. The maximun distance would be 133mm if you raise the plate.

Q: 4. will this work with om system om1m2 with battery grip and a 150-400 f4.5 tc 1.25 pro lens?

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head will work with the OM-1 II with a battery grip and the 150-400mm lens attached.

Q: 5. Will this work with an R5 and Tamron 150-600 lens on a SLIK Tripod Pro 724 CBH?

A: Yes, the Sirui PH-10 Carbon Fiber GImbal Head can fit on a Slik Pro 724 CBH with a Canon EOS R5 and an adapted Tamron 150-600mm lens.

Q: 6. Did they fix the PH20's awful drag adjustment in pan axis, or does the PH10 have the same ratcheting effect at very slight drag?

A: As far as I am aware, both the PH10 and PH20 have the same pan lock mechanism. Neither are known to have adjustable pan drag; it is simply a pan locking knob with no adjustment to tension.

Q: 7. Will this gimbal work with my Canon R6, 100-500 lens & 1.4 converter on a Manfrotto tripod (MKBFRLA4BK-BH) with the 494 BH? Do I need to buy anything else?

A: Yes, the Sirui PH-10 Carbon Fiber Gimbal Head can be used on a Manfrotto Befree Advanced Travel Aluminum Tripod to hold your Canon EOS R5 equipped with the RF 100-500mm and a 1.4X teleconverter.

Q: 8. Are true bearings (such as needle, cone or roller bearings) used in the bottom (pan) and the top (tilt) mechanisms, or do these mechanisms instead use lubricated bushings (such as bronze or teflon)? I ask because bushings are inferior over time as they fail much more quickly.

A: The Sirui PH-10 Carbon Fiber Gimbal Head has true bearings throughout.

Q: 9. Can this be used with a full size DSLR with Nikon 300mm f4 AF-S (non VR version) lens collar attached to gimbal? Would it still tilt upwards fully when balanced or would camera be too low and hit lower edge of gimbal?

A: Yes, it can handle a DSLR and large lens, and will angle up to about 45 degrees.

Q: 10. Will the Wimberley wh200 head that all ready has a lenscoat wrap on it fit in this pouch?

A: Yes the Gimbal with the lens coat wrap will fit inside the pouch easily.