Get enhanced protection against dropouts and poor sound quality on IEM wireless bodypack receivers with the black RF Venue CP Architectural Antenna. Designed to be discreetly mounted on a wall or ceiling in your music venue, event space, or house of worship, the antenna features a slim enclosure that can be painted to match any interior—for a highly polished and professional look.

Building on the highly acclaimed CP Beam Antenna, the CP Architectural is a high-performance flood antenna that uses a unique circularly polarized design to provide excellent transmit-signal coverage for IEMs. The antenna installs in minutes using the included wall- and ceiling-mount rear plates that are pre-drilled with multiple mounting-hole options. The rear plate then simply connects to the front plate, secured with the included mounting screws. Just connect the BNC male connector of your in-wall or in-ceiling, coaxial-cable run to the antenna's rear-mounted BNC female connector, and the CP Architectural is ready for use.

Better Wireless In-Ear Monitor Reception    Music Halls/Venues, Houses of Worship    Polished and Professional Look    Circularly Polarized Design    Easy to Mount on Wall or Ceiling    Paint to Match Any Interior    Rear-Mounted BNC Connector    Ceiling & Wall Mounting Kits Included

Related Questions and Answers

Q: 1. Are these zero-latency? There is nothing more distracting than hearing yourself with a tiny delay.

A: These types of UHF frequency based systems will have the lowest latency possible when transmitting audio.

Q: 2. I'm looking for the G2-C (518 to 554 MHz). I haven't had any luck. Does any here know where I can find it?

A: Yes, 518-554 is A band, not C as Gerald said. The antennas are the same between G2 and G3, requiring partial disassembly to reach a solder point internally. You can mix and match G2 and G3 equipment, but turn off the 'pilot' function on the G3. G3 stuff is still available, even though Sennheiser is on to G4 now.

Q: 3. can you add more receivers than two?

A: Yes you can. When adding additional receivers, make sure they are all on the same band and then just tune all receivers to the same frequency and it will work perfectly.

Q: 4. Does it works with Sk 100 G3 bodypack? (Ew 114 G3). The frequency range of my bodypack is 626-662 (B).

A: Yes, it seems to work on several of the frequencies.

Q: 5. will this antenna work with the EK 100 G2 A receiver with the same frequency 518-554mhz?

A: Replaced the antenna on my G2 and it works great!

Q: 6. Will this antenna work for range G 566-608? And both receiver and transmitter?

A: Yes. The Sennheiser 578854 Antenna can be used with SK 100/300/500 and SK 2000 Bodypack Transmitters from the G2, G3, and G4 series that operate on any frequency band between 558 to 626 MHz.

Q: 7. Can the transmitter be battery powered? Perhaps via an Audioroot BDS?

A: While I haven't experimented with it, technically you should be able to. It's a 12vdc input. So as long as you have the right cable and an adequate battery, I don't see why not.

Q: 8. My EW G3 SK100 Transmitter says it goes from 626-662 mhz, does this work? It only says 558 to 626 MHz frequency band.

A: This antenna will not work for your transmitter because it covers a different frequency range. You should be able to get the part you need from Sennheiser. They do sell replacement parts directly to customers. You can reach Sennheiser's US office by phone at 860-434-9190. Business hours are Monday through Friday from 9 AM to 5 PM EST.

Q: 9. can each receiver receive a separate channel? one XLR feeds one receiver, the other XLR feeds the other?

A: This is not possible. The microphone inputs are configured as a stereo output to each receiver.

Q: 10. Hello, does it work for the range 626-668mhz ?

A: No the Sennheiser 578854 Antenna only works for (558 to 626 MHz).