Clean up your AC power and improve the sound of your amplifier with the DC Blocker+ from iFi audio. The DC Blocker+ is designed to do just that, block DC power from getting into your high-power amplifier's transformer where it can cause a mechanical hum. This is especially true in amplifiers with toroidal transformers, and the bigger the amp, the bigger the hum. Simply connect the DC Blocker+ to the IEC input on the back of your audio amplifier, and plug the amplifier's power cord into the DC Blocker+. It's as easy as that—AC power is cleaned up, mechanical hum eliminated, and EMI shielding is retained. The DC Blocker+ is compatible with equipment using standard three-prong IEC power connections and drawing 10A or less of continuous power. The DC Blocker+ can also be used in conjunction with the iFi audio GND Defender ground loop eliminator.

IEC Female to IEC Male    Blocks up to 1200mV DC    10A Continuous Current Rating    Safely Retains EMI Shielding

• Blocks incoming DC—up to 1200mV
• Small size, universal application, won’t block any other connectors, sockets, or cables
• Universal IEC
• Hospital-grade IEC connectors

• High-performance glass passivated semiconductor
• High case dielectric strength of 1500VRMS
• UL listed
• Flame-resistant IEC socket/connector/chassis
• Fireproof polymers UL94-V0

Remember that the best practice is to always keep at least one direct power cable connection.

Related Questions and Answers

Q: 1. Will this work with the canon m6 mkii?

A: The appropriate dc coupler is the DRE17 to be used with the CAPS700 adapter. Click the links below to view; https://bhpho.to/2H4Yg7M https://bhpho.to/3cb0RZg

Q: 2. Is this the correct coupler for the GH6?

A: Yes, the Panasonic DMW-DCC17 DC Coupler would be the correct DC coupler designed for use with the Panasonic Lumix GH6 Mirrorless Camera.

Q: 3. will this work with cannon rebel t6i?

A: Yes, you will also need the ac adapter, the ACE6N.

Q: 4. Which usb c power adapter can I use? Just a 5v,2a phone charger with usb c?

A: According to the manual, this will require a 5V power supply via the USB-C port to function. Their iPower (5V) is recommended but any low noise 5V power supply will work.

Q: 5. Will this work with the S5II & S5IIx? Also, are there any connections that will allow me to adapt to a Sony NP-F970 adapter?

A: Yes, the Panasonic DMW-DCC17 DC Coupler is compatible with the Panasonic S5ii and the S5IIX. There is no adapter we are aware of that works with that to make it NP-F970.

Q: 6. What's the difference between version 2 and the one that's been discontinued? I have 4 of the discontinued ones and am wondering if there was an issue with them. Only problem I can notice is that the ring that goes around the microphone is just slightly too small so when you try to clamp it down you have to hold the metal tab to keep it from spreading apart and bending.

A: The new On-Stage Pop Blocker for Rode PodMic Microphone (Version 2) offers an improved clamp mechanism and provides a better fit on the microphone when compared to the original version of the Pop Blocker for the PodMic.

Q: 7. Can you use these if you wear eyeglasses?

A: Yes. The Spudz Bino Bandit Glare Blocker (Vanish Shadow, XL) can be used with eyewear.

Q: 8. What else do you need to make this work for a power source on a Canon 60d?

A: You will need the Canon AC-E6N adapter. Click the link below to view; https://bhpho.to/3imalUo

Q: 9. Is this Dual-Layered? Will it work well with a Blue iCE Snowball desk microphone or similar Blue products on their stock stands?

A: The ASVS4-B is a 4 diameter single layer nylon pop filter. The clothespin style clip makes it widely compatible with stands and mics and can be used with mics such as the Blue Snowball or similar.

Q: 10. would this work with the blue yeti mic and stand? if not any suggestions on a small pop screen that will work with it?

A: The On-Stage Pop Blocker is not compatible with the Blue Yeti. You would want to use something more like the Auray PFMU-12 to be able to do that.