The Background Sextuple Hooks from Impact make it possible to mount six rolls of seamless background paper up to 9 x 6 ft. to a studio wall or ceiling. This hook system makes it easy to access and switch between the different paper rolls. The Impact Varidrive chain drive system can be installed into each roll, and the hooks separate each background roll with enough room to change backgrounds quickly and conveniently. Thanks to the progressive length of each hook, each roll can be accessed individually without the hassle of moving the others.

The slots in each hook are cut at a 45° angle so they will support paper rolls with Varidrive cores suspended from a ceiling. Concrete anchors are included for permanent wall or ceiling mounting. This simple addition to your studio reduces the time spent on tasks like changing backgrounds, and spending more time creating the perfect image.

NOTE: May be mounted to sheetrock walls using sheetrock anchors, molly bolts or toggle bolts, available separately.

Supports Six Seamless Paper Rolls    Eliminates Need for a Background System    Use with Optional Impact Varidrive Units    45° Mounting Slot Angle    Can Be Mounted on Wall or Ceiling    Included Concrete Wall Anchors    Steel Construction, Stealth Black Finish

• Two wall-mountable brackets
• Holds six rolls of 9 x 36' seamless background paper
• 45° slot angle for wall or ceiling mounting
• Strong and durable steel construction
• Stealth black powder coat finish prevents unwanted glare, resists corrosion
• Compatible with Impact Varidrive sets
• Concrete anchors included

Related Questions and Answers

Q: 1. Hi, Could someone please tell me how far apart these brackets need to be mounted for the Varidrive system with the varidrive metal core background poles? Many thanks!

A: Depends on the size of the role you are using. You need the length of the role plus about 2-4 inches on each end. This gives you room to adjust on both sides.

Q: 2. What size are the 4 hex screws that attach bracket to the super clamp? I need some replacements and they are not standard 1/4 ..

A: #10-32 either 1/2" long or 5/8" depending on depth in the super clamp. Home Depot has them. Get #10 washers with them.

Q: 3. Does anyone know what is the diameter of the slots? In other words if I want to put a crossbar instead, what should be it diameter to fit on the slots

A: 11/16" or 17.5mm

Q: 4. Distance between the bottom of top hook plate and the top of bottom hook plate?

A: The distance between the bottom of the top hook plate and the top of the bottom hook plate on the Impact Background Dual Hooks (Set of 2) measures approximately 3 3/4 inches.

Q: 5. Would this be able to hold an extra wide 140" seamless (40 lbs)?

A: According to the manufacturer it would not be recommended.

Q: 6. Do these come with the required screws to attach to a pair of Impact Superclamps?

A: I purchased the heavy duty drywall anchors and washers from big box home improvement store.

Q: 7. Will this, combined with the Impact Pro Backdrop Support, be able to hold 3 muslin/polyester backdrops that are 10x24' ?

A: No, A C-Stand is the right stand for your setup.

Q: 8. What do you use to prevent the paper roll from sagging in the middle? I plan to use on savage 107

A: I use a piece of 3/4 inch EMT. Readily available at Lowes or HomeDepot.

Q: 9. What crossbar is needed to hold a seamless paper roll up?

A: These hooks are meant to be used with the varidrive pulley system. At the moment there is no crossbar that would be used. You can find the varidrive pulley system here: https://www.bhphotovideo.com/c/product/822879-REG/Impact_vpd_dsg_Background_Paper_Drive_Set.html

Q: 10. Do I need to get 4 pcs. Impact Superclamp to attach these to the Impact Varipole? Or will 2 superclamps be sufficient?

A: You might be able to do 2 clamps. But for the cost and security Id do two. I did.