Keep your hardware protected from spikes and outages with the PR2000RTXL2UCN Smart App Sinewave UPS from CyberPower, a rack/tower convertible UPS with line-interactive topology, surge protection, battery backup, and sine wave output to eliminate power gaps that can be detected by sensitive equipment and cause unexpected shutdowns. This uninterruptible power supply (UPS) sports eight NEMA 5-20R outlets, all of which provide surge protection and battery backup, while four also serve as critical load outlets. Providing an output of 2000VA/2000W at 50/60 Hz, the PR2000RTXL2UCN Smart App Sinewave UPS can be used with 120V inputs. Line-interactive topology, automatic voltage regulation, and power-factor correction all ensure your connected equipment is appropriately powered, while a 2430-Joule surge suppression rating and a 20A circuit breaker prevent damage during a spike.

This UPS offers runtimes measuring 4.3 minutes at full load, or 12.2 minutes at half load, while the backup battery has a 3-hour recharge time. The sine wave power output results in low total harmonic distortion and electrical noise for improved line clarity. In addition to an RJ45 port for cloud monitoring, the rear panel also incorporates a USB-B, serial, and EPO ports for communication purposes as well as a pre-installed RMCARD205 network card for remote management and control via a standard web browser or network management system. Also available are Extended Battery Module (EBM) connections for extended runtime during power outages.

The multifunction LCD screen rotates 90° and can be used to monitor battery and power conditions and alerts to potential problems. Use PowerPanel Personal software to control your UPS via a convenient dashboard interface. The PR3000RTXL2UC utilizes a 10' power cable with a NEMA L5-20P plug for flexible deployment.

Output: 2000VA / 2000W    Input: 100-120 VAC (Range: 70-155 VAC)    8 × NEMA 5-20R Total Outlets    8 x Battery/Surge & 4 x Critical Outlets    RJ45 | USB-B | Serial | EPO    Pre-Installed RMCARD205 Network Card    Sine Waveform, Line-Interactive Topology    Automatic Voltage Regulation (AVR)    2430 Joules of Surge Suppression    Multifunction LCD Panel

• Corporate Servers
• Department Servers
• Network Devices
• Storage Devices
• Telecom Installations
• VoIP Installations

Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.

Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.

The UPS generates energy that is identical to, or cleaner than the utility company's power grid. Benefits include low total harmonic distortion, minimal electrical noise, and optimal line clarity.

AVR increases or decreases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life.

Battery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.

Extend runtimes for critical devices by powering down non-critical equipment to free up battery capacity.

Allows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.

Tilts to provide a better viewing angle when the Smart App Sinewave is mounted low. Rotates 90° when placed in a tower format for horizontal viewing. Provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.

Makes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.

Allows for horizontal rack or vertical tower installation.

Provides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.

Exists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.

This model accepts the RMCARD205 network management card for remote management and control via a standard web browser or network management system. Built-in cloud monitoring is included.

This model is an ENERGY STAR certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

A patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.

CyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date.

CyberPower will repair or replace up to $400,000 of properly connected equipment if it is damaged by a power surge.

Related Questions and Answers

Q: 1. Is this a AVR Battery ?

A: Yes, the CyberPower OR700LCDRM1U Smart App LCD UPS does utilize Automatic Voltage Regulation technology.

Q: 2. Is this UPS Active PFC compatible?

A: This CyberPower UPS is active PFC Compatible.

Q: 3. Do I have to use the software? I just want a simple plug and protect scenario.

A: To take advantage of this unit's full feature set you will need to use the included management software. If you do not need the smart app functions, then you may be better off with a simpler UPS such as BH #CYCP1500PFCQ .

Q: 4. But, have you been able to communicate with this unit to set up auto-shutdown parameters? CyberPower is notorious for ancient non-standard USB implementations with which LINUX and Windows cannot communicate, so you need to be sitting at your system to execute a manual shutdown when the power fails. Not very useful. (And CyberPower support will always blame you / your system until they run out the warranty on you. I.e they WILL NOT support their hardware.)

A: Yes, the software suite that comes with the UPS includes auto shutdown features as well.

Q: 5. Will this handle a devise that has a large amp draw?

A: This CyberPower Smart App Sinewave UPS will support up to a 20a draw. Note that only the bottom two outlets support that current. The others are 15a.

Q: 6. What is the difference between the CyberPower PR1500LCDRT2U & CyberPower PR1500LCDRTXL2U ? Basically what does "XL" mean ?

A: Hello Robert, The PR1500LCDRTXL2U provides more runtime as compared to PR1500LCDRT2U. Thank you for your quesiton.

Q: 7. Can i add externas bateras ..?

A: Hi John - the unit does not have the ability to add external batteries. If you need extra batteries you would want to look at our PR2200LCDRTXL2U

Q: 8. Is this product compatible with Windows 10?

A: Hello Ray, Yes the accompanying software is compatible with Windows 10. Thank you for submitting your question!

Q: 9. Hi, for the CyberPower PR2200RTXL2U how many Extended Battery Modules (BH #CYBP48VP2U02 MFR #BP48VP2U02)can be added together?

A: The CyberPower PR2200RTXL2U Smart App Sinewave UPS BH #CYPR22RTXL2U supports up to 10 extended CyberPower Extended Battery Modules BH #CYBP48VP2U02.

Q: 10. does it include rack mounting hardware?

A: No, a rack mounting hardware would not be included with the CyberPower OR700LCDRM1U Smart App LCD UPS.