Ideally suited as a backup, everyday carry (EDC), or key chain light, the Dream Blue Olight i3T EOS LED Flashlight is a tiny but powerful illumination tool.

It has a single Philips LUXEON TX LED driven by a ubiquitous AAA alkaline battery that outputs a low 5 lumens useful for rooting through your bag or reading without disturbing others. It also has a high output of 180 lumens to light your tent, get you safely to the loo in the middle of the night, or help you change a tire. Its beam is sent through a factory-focused Total Internal Reflection (TIR) lens system that produces a smooth beam defined by a bright center cone and generous spill without holes or hotspots. A single push-button tailcap switch gives you access to both outputs with momentary and constant-on options. For your safety, and the safety of any companions you might be with, the light turns on at the low setting by default, so you won't be accidentally blinded.

The housing is made of lightweight and durable 6061-T6 aluminum alloy with a scratch-resistant Type III hard-anodized finish. Olight designed the handle to fit comfortably in your hand with a carved double helical groove for a sleek, distinctive style and slip-resistant grip. The housing is further sealed to an IPX8 rating and is resistant to drops from almost 5', so it will continue to work if even if you take a fall in a puddle or stream. A two-way removable clip lets you carry it on your belt, in your pant or shirt pocket, or even clipped to your cap as a headlight. Measuring just 3.5" long and weighing only 1.5 ounces with the battery, there is no reason one (or several) i3Ts shouldn't be squirreled away in your car, junk drawer, console, toolbox, and bug-out bag.

For Camping, EDC, General Use    5- and 180-Lumen Outputs    One Philips LUXEON TX LED    Total Internal Reflection (TIR) Lens    Intuitive Push-Button Tailcap Switch    Momentary and Constant-On Activation    6061-T6 Aluminum Housing    Anodized Finish    Impact Resistant and Waterproof    Runs on One AAA Battery

• Low: 5 lumens
• High: 180 lumens
• Philips LUXEON TX LED
• TIR reflector for large, well-defined hot spot

• Type: Tailcap push button
• Momentary and constant-on activation

• Aluminum housing with stylized spiraled knurling
• IPX8-rated water resistant
• Two-position removable clip for pocket, hat brim, strap, etc.
• Runs on one included AAA battery

Related Questions and Answers

Q: 1. With ISP and IDP turned all the way up, with is the maximum throughput?

A: The max speeds are the theoretical AC Wave 2 speeds of up to 1733Mb/s and Gigabit Ethernet speeds//

Q: 2. How do I get a replacement power cord? Dog chewed through it

A: You would need a C7 power cable like this one. https://www.bhphotovideo.com/c/product/1013000-REG/avenview_3a_pc_us_10a_c7_power_cord.html

Q: 3. Does this router have parental controls?

A: This is not a consumer product that has parental controls as a option. You can filter and control on many different levels in the software.

Q: 4. can this support the Unifi G4 so long as I have the cloud key?

A: Yes it will. Ubiquiti Networks UniFi Cloud Key Gen2 Plus B&H # UBUCKG2PLUS https://bhpho.to/35K5QhA 1TB 2.5" SATA HDD (Upgradeable) 802.3af PoE | QuickCharge 2.0 USB Type-C 1 x 10/100/1000 Mb/s Ethernet Port 2 x USB Type-C Ports 1 x MicroSD Card Slot Front Panel Display Built-In Battery Hybrid Cloud Technology

Q: 5. What is the HMI equivalent of this light? Trying to understand the maximum output.

A: Since this light is rated with an equivalent of 1700 watts of tungsten, HMI would be about 4 times the light output of tungsten, essentially giving you close to output of a 400-575w HMI.

Q: 6. Is the light ring at the top on all the time? If so, is there a way to turn it off or dim it?

A: You can turn off the light in the settings for the Ubiquiti Networks Dream Machine BH #UBUDMUS.

Q: 7. Does it support VLANs?

A: Yes, the Ubiquiti Networks Dream Machine 4x4 MU-MIMO AC1733 Wave-2 Dual-Band Gigabit Access Point has VLAN support.

Q: 8. Which color temp will give the most power? How much power do you lose when toggling between tungsten. daylight and party colors?

A: According to Arri, the output is slightly higher at 5600K. As for using the light in color mode, that would give a similar output to using the light at 5600K, being that there is very minimal color shift.

Q: 9. What is equivalent of brightness of this Lighting of daylight HMI and tungsten lighting?

A: They say it's equivalent as a 1.5k. I would say that in my experience it seems similar to a 1k tugnten fresnel and falls somewhere btw a 575 and 1200w hmi daylight (par lenses). It's pretty tough - the weak point is that the focusing barrel is made of plastic and can break if dropped or not protected. The best part about this light is that it can do any color. I'd purchase again.

Q: 10. What is the replacement cost of the LED when it breaks or burns out? Where do you get a replacement LED internal?

A: The LED array is not user replaceable. In extremely rare case of an LED failure, the unit would have to be sent back to the factory for repair.