Designed for advanced 3D navigation and well-suited for engineering workspaces, the SpaceMouse Pro Wireless (Bluetooth Edition) from 3Dconnexion is well-suited for reviewing 3D drawings with colleagues or presenting ideas during a meeting. The SpaceMouse Wireless Pro combines a patented 6-Degrees-of-Freedom (6DoF) sensor with 2.4 GHz wireless technology, a rechargeable battery that lasts for up to a month, and a USB-C to USB-A cable that allows the SpaceMouse Wireless Pro to recharge and be used as a wired mouse. Also included is a USB-A universal receiver for Bluetooth connectivity and a carry case.

2.4 GHz Wireless Connectivity    Professional 3D Navigation    6-Degrees-of-Freedom (6DoF) Sensor    Manipulate Content & Camera Positions    Push/Pull/Twist/Tilt the Controller Cap    Pan/Zoom/Rotate 3D Drawings    15 Programmable Keys    3Dconnexion Keys & Keyboard Modifiers    Windows & Mac Compatible

The Controller Cap is the heart of your SpaceMouse Pro Wireless. Its Six-Degrees-of-Freedom (6DoF) sensor allows you to push, pull, rotate, or tilt to pan, zoom and rotate your drawings and 3D models. The SpaceMouse has different motion profiles depending on the application you are using. In Object Mode applications the 3D navigation behaves as if you were reaching into the screen and holding the object in your own hand. In Fly Mode applications, the navigation behaves like a flying camera you are viewing through. For many applications, you can adjust this behavior in the Advanced Settings of your SpaceMouse Pro Wireless.

The Menu Button allows for fast and easy customization of your 3Dconnexion devices. Pressing it will take you directly to the 3Dconnexion Settings. Select the device you want to configure in the flyout window and customize it.

With the Fit Button, you will never lose sight of your drawing or 3D model. Press it to bring your drawing back to the center of your screen.

The SpaceMouse Pro Wireless features four additional programmable function buttons, located above the controller cap. It instantly recognizes the applications you are using, as well as their environments, and automatically assigns the most used commands to the buttons. You can personalize commands assigned to the function buttons using the 3Dconnexion Settings.

The SpaceMouse Pro Wireless offers an On-Screen Display (OSD) that shows you the current assignment of the 3Dconnexion buttons. To display the OSD of your SpaceMouse Pro Wireless, press and hold any of the 3Dconnexion Buttons. It will be displayed as long as you keep the button pressed. This function can be disabled in the 3Dconnexion Settings.

The SpaceMouse Pro Wireless comes with four Keyboard Modifiers that work like the corresponding keys on your keyboard. You can personalize the commands assigned to the Keyboard Modifiers using the 3Dconnexion Settings.

The SpaceMouse Pro Wireless features four QuickView Buttons helping you to quickly bring your drawing or 3D model into the desired view. You have the option to change the assignment of the buttons in the 3Dconnexion Settings.

In the center between the QuickView Buttons is the Rotation Toggle Button. Pressing it once locks the rotation around all axes.

Pan / Zoom

Enables/disables panning of your part, assembly or drawing. Enabled by default.

Rotation

Enables/disables rotation of your part, assembly or drawing. Enabled by default.

Dominant

Turns on and off dominant filter axis, which when enabled restricts the pan, zoom, or rotations to a single axis.

Forward / Backward

Zoom by pushing the cap toward or away from you parallel to the desk.

Up / Down

Zoom by pulling the cap upwards or pushing the cap downwards parallel to the screen.

Use the slider to set the speed for each of the 6-Dimensions-of-Freedom individually. To reverse the direction of a movement, check the Reverse box for that movement.

Object Mode

Object Mode enables Object Mode navigation. This mode is like reaching into the screen and holding the model in your hand. Push the SpaceMouse cap left, and the model moves left. Push right and the model moves right.

Fly Mode

Fly Mode enables using the Controller Cap as if it is a flying camera. Push into the scene and the camera flies forward into the scene. Push left and the camera flies to the left (the scene moves to the right). Lift up and the camera flies up (the scene moves down). You are entering the scene as if flying around in it.

Target Camera Mode

Target Camera Mode enables Target Camera Mode navigation. Manipulate the SpaceMouse cap as if it is a target camera. Push into the scene and the camera moves forward into the scene. Push left and the camera moves to the left (the scene moves to the right). Lift up and the camera moves up (the scene moves down). When rotating the cap in any direction you willorbit around the target point (see Rotation Center below).

Drone Mode

Drone Mode enables a Fly Mode navigation but pushing the cap forward while looking down will not change the altitude of the camera.

Lock Horizon

Lock Horizon forces the horizon to be kept leveled as it currently is.

Auto

Auto sets the center of rotation dynamically. When the complete model is in view, the center of volume of the whole model is used as the rotation point. When you move closer, the center of rotation will be set on an object close to your center of the view.

Use Selected Item

Use selected Item forces the rotation center to only take the currently selected objects into account.

Always Show

Always Show always visualizes the Rotation Center.

Show On Motion

Show on Motion will visualize the Rotation Center only during movement.

Hide

Hide will disable the Rotation Center visualization.

Related Questions and Answers

Q: 1. Does it work with the blackweb bluetrace mouse model no: BWA15HO123?

A: No. The 3Dconnexion Universal Receiver is a replacement USB wireless receiver for your 3Dconnexion peripherals.

Q: 2. Is it compatible with Apple Silicon now (late 2023) - 3D Connexion Wireless?

A: Yes, the 3Dconnexion SpaceMouse Wireless is compatible with Apple Silicon Macs.

Q: 3. I have a Microsoft Ergonomic mouse and keyboard L5V 00001 combo and my receiver is broken. Will this work with that?

A: This receiver is specifically for the 3D Connexions hardware.

Q: 4. How is the support for Premiere, Photoshop, and Lightroom on this product?

A: While this device is almost infinitely customizable, I really wouldnt recommend it for photo editing apps. Its intent is CAD programs where you will inuitively maniuplate a CAD model like you would if you were holding it in your hand. Most of the hard buttons are labeled for CAD apps, so even though you can reprgram them, they wont be intuitive. Im a photographer also, and I do not use this device for photo apps, only at work with CAD modeling programs.

Q: 5. From the specs, Not all features are available on all operating systems. I'm interested in using this on a Mac with Sierra for 3D work with Cinema4D, Modo, Zbrush. What features are not supported?

A: The manufacturer does not provide that specific information.

Q: 6. Will this work with the Adesso iMouse E10? I can't find the RCV-130R receiver that came with the mouse and need to replace it.

A: No, it will not work with the Adesso mouse.The 3Dconnexion Universal Receiver is a replacement USB wireless receiver for 3Dconnexion peripherals.

Q: 7. Is there any difference, besides the travel case, between this and the previous spacemouse pro wireless?

A: Only the wireless interface has changed between the models.

Q: 8. Is the cord on this the old-style USB connector, or is it USB-C that will plug directly into a Mac?

A: The 3Dconnexion SpaceMouse Compact BH #3DX700059 uses a USB Type A cable. To use it with a Type C system, you will need an adapter like the Pearstone USB 3.0 Type-C to USB Type-A Adapter (6") BH #PEUSB33CA06.

Q: 9. Will it work with later wireless mouse 3dconnexion models?

A: This is a Universal connector with 3Dcoonexion product line of items. It does work with their newer items as well.

Q: 10. Would it work with Google Earth in Chrome browser?

A: The 3Dconnexion SpaceMouse Wireless works with the Google Earth Pro desktop application; however, the Chrome version of Google Earth may not have the driver support for this mouse.