This 24" long 15mm Rod from MID49 supports optional rod-mounted lens accessories such as follow focus units, motors, lens lights, and matte boxes. The stainless steel construction makes this rod corrosion resistant. The chamfered end makes it easier to slide your accessories onto the rod.

Stainless Steel    Chamfered End

Related Questions and Answers

Q: 1. Will this work with sony a7s ii?

A: The dummy battery will not fit. This is the correct one for the A7S2: https://www.bhphotovideo.com/c/product/1203225-REG/indipro_tools_v_mount_battery_and_plate.html

Q: 2. this is a universtal v mount batterY? (bmpcc,red,sony and etc...)

A: Yes, as long as you have the proper power cable or dummy battery for the camera.

Q: 3. Does the cable comes attached to the plate or can be disconnected from it? If so, what is the type of connector of this cable

A: no the cable does not come attached to the plate. Here are the cable attachments it comes with Canon LP-E6 Dummy Battery 2 x 12 VDC M/M Power Cable (5.5/2.5mm) 8 VDC M/M Power Cable (5.5/2.1mm)

Q: 4. If you already have the Canon brand DR-E6 dummy battery, would you be able to plug that into this, or must you use the Tilta supplied dummy battery?

A: If you have a Dummy Battery with a D-Tap connection you will be able to use it with this system. It does not need to be a Tilta product.

Q: 5. Does IDX Endura V mount battery fit on this plate?

A: Yes, the IDX Endura will fit on this plate.

Q: 6. What dummy battery should I buy with this to use with a Sony a7sii?

A: You will need an NP-FW50 style dummy battery like BH #GYGVDTA7S60. https://bhpho.to/2OtGFXc

Q: 7. I see there isn't a step down ring for 95mm- is there one sold separately?

A: Hello Ben, Thank you for your question! Unfortunately, as it stands we do not offer a 95mm step down ring for this unit. We do have a 110mm ring included though. So ideally, if you can find a 100-95mm step down ring out there on the market, you would be covered. We hope this helps and we thank you for your interest in our products. The SHAPE team

Q: 8. Does this work with the C200?

A: Hello Shawn, Thank you for your question! Indeed, our Cheeseplate V-mount works perfectly with the Canon C200. We hope this helps and we thank you for your interest in our products. The SHAPE team.

Q: 9. My Pocket Cam tends to get fairly hot when using this plate and 3rd party v-mount battery. Does the IndyPRO BMPCC V-mount plate regulate voltage from the battery?

A: I let my BMPCC run for an hour on the IndiPro battery and plate to test it. Sure it was really hot to the touch but it didn't shutdown. I don't think its a problem.BUT if you're worried about the battery and plate being unregulated and could potentially damage the camera, unfortunately, I wouldn't know about that.

Q: 10. Can we use any voltage v-mount battery on this? As in the standard 14.8 volt v-mount, or a 16.8 volt high load v-mount battery or even the 26 volt output v-mount heavy load battery? I can’t find answer for this anywhere. I am sure we can use the 14.8v standard v-mount battery, but I really want to know if we can use higher voltage output v-mount batteries with this plate and if it will still regulate output voltage.

A: The plate is designed for use with standard 14.8V batteries. Normally you would only use a High-load battery when connecting to a camera or product that requires the high load like RED and Arri Cinema cameras.