The 12mm Low-Mode Bracket from DigitalFoto is designed to extend your gimbal stabilizer support for low-mode operation. The bracket features a fixed base, a 12mm post for compatible stabilizer mounts, and its extension features a 7.9" long post, which allows rotation on top.

The Low Mode Bracket is compatible with Tiffen Steadicam, DigitalFoto THANOS-PROCINE, Laing, MOVVAM, GPi, ARRI TRINITY 2, ARTEMIS 2, and Tilta Float stabilizer supports.

Mount Stabilizer in Low Mode    Durable 12mm Post Mount    Post Extension Measures 7.9"    Top Part of Post Allows Rotation    Fixed Base    For THANOS, Tiffen, MOVCAM, GPi Rigs    ARRI TRINITY 2/ARTEMIS 2, Tilta Float

Related Questions and Answers

Q: 1. Do the jib and tripod come with carry bags as seen in the video?

A: Yes, carrying bags are included with the jib and tripod.

Q: 2. can it fit my ronin sc 2? thanks

A: Yes, the DigitalFoto Solution Limited Compact Tiltable Universal Single Handle Gimbal Supporting Vest System has a round base attachment with a 1/4"-20 screw and the DJI Ronin SC 2 has a 1/4"-20 thread. Since both of these components are 1/4"-20, the DJI Ronin SC 2 can fit on the DigitalFoto Solution Limited Compact Tiltable Universal Single Handle Gimbal Supporting Vest System through that round base attachment. Please refer to photo #4 and you will see the round base attachment. In the photos of the DJI RSC 2 Gimbal Stabilizer, the 1/4"-20 thread can be found in between the tripod base and the gimbal handle. https://www.bhphotovideo.com/c/product/1595378-REG/dji_cp_rn_00000121_02_rsc_2_gimbal_stabilizer.html?sts=pi&pim=Y Page 6 of the DJI RSC 2 Gimbal Stabilizer Manual also shows how the tripod base can attach to the DJI RSC 2 Gimbal Stabilizer. https://www.bhphotovideo.com/lit_files/641198.pdf

Q: 3. Will this fit the rs3 pro?

A: Yes, the SmallRig Adjustable Monitor Mount for Select Handheld Gimbal Stabilizers can be used on the DJI RS3 Pro Gimbal Stabilizer. It needs to be mounted to a secondary accessory or to the bottom 1/4-20" because it does not have a NATO mount to go directly on the side of the gimbal.

Q: 4. How much It's Maximum radius ?

A: 7.1 feet.Thank you

Q: 5. Can this handle the Sony FS700 and Manfrotto 504HD head or a benro S8 head ?

A: The Sony FS700 with lens and mic is about 5 lbs. The Manfrotto 504 is 6.39 lbs. The Benro is S8 is 5.7 lbs. Depending on configuration, the M1-III Mini Crane Jib can handle 22 lbs to 33 lbs. You are fine with either head and the camera.

Q: 6. What accessories will I need (if any) to attach a DSLR?

A: The iFootage M1-III comes with everything you need to attach a DSLR camera to its quick release plate. However, You could add the iFootage Komodo K5 Fluid Head which would allow you to tilt and position the camera using the 75mm bowl adapter. iFootage Komodo K5 Fluid Head BH #IFK5

Q: 7. Can it fit on a zhiyun crane plus?

A: Yes, it has a universal clamp that is compatible with the Zhiyun Crane Plus.

Q: 8. Is this arm brace compatible with Flycam Redking?

A: Yes this arm brace should work well with the Flycam Redking and is also sold together from the manufacturer as a kit: FLCMRKAB https://www.bhphotovideo.com/c/product/1554471-REG/flycam_flcm_rk_ab_redking_video_camera_stabilizer.html

Q: 9. Hi! Will this work with the new ronin s3 and s3 pro? Thanks!

A: The DigitalFoto Solution Limited THANOS-SE Compact Tiltable Universal Single-Handle Gimbal Support Vest System (B&H# DITHANOSSE) will support certain combinations including those utilizing the DJI RS 3 Gimbal Stabilizer (B&H# DJRS3) or DJI RS 3 Pro Gimbal Stabilizer (B&H# DJRS3P) as long as the effective load weight at the point where it grips the handle is 4.4-17.6 lb. (2-8 kg).

Q: 10. will this work on any v mount? not just red cameras?

A: The Wooden Camera Low-Mode Adapter for the RED DSMC2 V-Lock Expander should work with other cameras universally. However, Wooden says the following about the adapter: This assembly will attach without tools directly to the back of the RED®'s V-Lock Expander Module or the Element Technica V-Mount Module. Compatible with RED® DSMC2™ Brains (Monstro, Helium, Gemini), Weapon, Epic Weapon (Epic-W), Scarlet Weapon (Scarlet-W), Raven, and other DSMC2™ cameras. We would recommend this adapter for other camera models: Wooden Camera Pro V-Mount to Gold Mount Battery Adapter BH #WO259600