The 12mm Low-Mode Bracket from DigitalFoto is designed to extend your gimbal stabilizer support for low-mode operation. The bracket features a fixed base, a 12mm post for compatible stabilizer mounts, and its extension features a 11.8" long post, which allows rotation on top.

The Low Mode Bracket is compatible with Tiffen Steadicam, DigitalFoto THANOS-PROCINE, Laing, MOVVAM, GPi, ARRI TRINITY 2, ARTEMIS 2, and Tilta Float stabilizer supports.

Mount Stabilizer in Low Mode    Durable 12mm Post Mount    Post Extension Measures 11.8"    Top Part of Post Allows Rotation    Fixed Base    For THANOS, Tiffen, MOVCAM, GPi Rigs    ARRI TRINITY 2/ARTEMIS 2, Tilta Float

Related Questions and Answers

Q: 1. Can it fit on a zhiyun crane plus?

A: Yes, it has a universal clamp that is compatible with the Zhiyun Crane Plus.

Q: 2. Is this arm brace compatible with Flycam Redking?

A: Yes this arm brace should work well with the Flycam Redking and is also sold together from the manufacturer as a kit: FLCMRKAB https://www.bhphotovideo.com/c/product/1554471-REG/flycam_flcm_rk_ab_redking_video_camera_stabilizer.html

Q: 3. Im confused by earlier q&a in here,Is the max weight for camera rig 15kg alone, or 15kg included counterweights, which means around 7.5kg on each side?My rig weighs around 10kg.(Ursa Mini 4.6 with 70-200 2.8)

A: I spent a lot of time asking around on this one. I posted the original question. Some companies said they would check directly with iFootage, and I received opposing answers, both claiming certainty.I think we need clarity directly from iFootage about this.Think about it. If it's 15kg for the rig only, then their product might have to take double? to balance. Is it really that strong? And what about the difference between shortened and fully extended arm in terms of physical pressure.No. I still haven't been 100% certain of the answer.If you want, try it slowly. And monitor the structure very carefully.

Q: 4. can it fit my ronin sc 2? thanks

A: Yes, the DigitalFoto Solution Limited Compact Tiltable Universal Single Handle Gimbal Supporting Vest System has a round base attachment with a 1/4"-20 screw and the DJI Ronin SC 2 has a 1/4"-20 thread. Since both of these components are 1/4"-20, the DJI Ronin SC 2 can fit on the DigitalFoto Solution Limited Compact Tiltable Universal Single Handle Gimbal Supporting Vest System through that round base attachment. Please refer to photo #4 and you will see the round base attachment. In the photos of the DJI RSC 2 Gimbal Stabilizer, the 1/4"-20 thread can be found in between the tripod base and the gimbal handle. https://www.bhphotovideo.com/c/product/1595378-REG/dji_cp_rn_00000121_02_rsc_2_gimbal_stabilizer.html?sts=pi&pim=Y Page 6 of the DJI RSC 2 Gimbal Stabilizer Manual also shows how the tripod base can attach to the DJI RSC 2 Gimbal Stabilizer. https://www.bhphotovideo.com/lit_files/641198.pdf

Q: 5. What accessories would I need to attach my edelkrone head plus?

A: The Edelkrone Headplus can be attached to a tripod, or another product, with a 3/8"-16 screw. The jib in this kit includes such a screw.

Q: 6. Can you lock this jib for long exposures?

A: Yes, this can be locked off.

Q: 7. Can this handle the Sony FS700 and Manfrotto 504HD head or a benro S8 head ?

A: The Sony FS700 with lens and mic is about 5 lbs. The Manfrotto 504 is 6.39 lbs. The Benro is S8 is 5.7 lbs. Depending on configuration, the M1-III Mini Crane Jib can handle 22 lbs to 33 lbs. You are fine with either head and the camera.

Q: 8. I need this for my Para 133 and Flooter Broncolor. Is it ok? or better will be 126csu manfrotto?

A: This stand is plenty strong for the Broncolor Para 133 or the Broncolor Flooter Fresnel.

Q: 9. Hi, Will it fit the Glidecam XR Pro?

A: The only option we know that will work with the Glidecam XR Pro is their own offering. https://bhpho.to/3di47of

Q: 10. I've just bought this (from B&H - arrived today) and I want to check... Load capacity of 33lbs means total load capacity yes/no?Right now I have my rig and the rear weights loaded at 33lbs.

A: According to iFootage support the total load (camera rig PLUS counterweight) cannot exceed 15kg. As for a fully extended arm you need twice the counterweight, that means for full extension max camera rig weigh is 5kg.